Compact City and Philippine Investment Corridor

Anyang, South Korea: Compact Industrial City and the Philippine Manufacturing Base

Anyang packs 562,168 residents and 1,847 manufacturers into 58.50 square kilometres, 21 kilometres south of Seoul. Half the city is greenbelt, the entire city sits inside the capital region overconcentration control zone, and the industrial land that remains is being rebuilt rather than expanded. For Anyang firms in power equipment, automation, telecom modules, medical devices and printing, the Philippines offers the expansion room that Gyeonggi Province no longer can: 100 percent foreign equity in export manufacturing, a 4 to 7 year Income Tax Holiday, and duty free re entry into Korea on 94.8 percent of tariff lines.

51% Of the city is greenbelt, 29.81 square kilometres that cannot be built on
5.52% Industrial land, 3.23 square kilometres shared by 1,847 manufacturers
31,235 Manufacturing employees across four large, 105 medium and 1,738 small firms
778 Certified venture companies inside the 3.17 square kilometre venture valley
94.8% Tariff lines eliminated under the Philippines Korea Free Trade Agreement
01 / The Capacity Constraint

A City That Grew Into Its Own Boundaries

Anyang is not short of companies. It is short of land, and the planning rules make that shortage permanent rather than temporary. That single fact explains why an Anyang manufacturer with a full order book starts looking at Batangas, Clark or Cebu instead of a second site in Gyeonggi.

Why the ceiling is structural

All 58.50 square kilometres of Anyang sit inside the Seoul capital region overconcentration control zone. That designation restricts new factory floor area and caps expansion for larger employers, which is why the city's own industrial policy now talks about redevelopment, not new greenfield estates.

  • Greenbelt covers 29.81 square kilometres, just over half the city, and 64.29 percent of the land is classified as green space in total.
  • Industrial land is 3.23 square kilometres, 5.52 percent of the city, already carrying 1,847 manufacturers and 31,235 workers.
  • Commercial land is 3.86 percent. Residential is 26.33 percent. There is no reserve left to rezone.
  • The largest new supply is a redevelopment: the Bakdal knowledge and advanced industrial district, 397,065 square metres on the old Manan industrial area, running from 2023 to 2033.
  • Knowledge industry centres were allowed 43 more permitted business types from 30 January 2026, taking the list from 693 to 736, which raises density on the same footprints rather than adding land.

The city's answer is vertical. A Philippine plant is the horizontal answer, and it does not require giving up the Anyang site. Korean headquarters, customer approval, design control and export documentation stay in Gyeonggi. Volume, assembly and labour intensive steps move to a zone in the Philippines.

Two districts, two economies

Manan-gu is the river west bank and the old downtown. Dongan-gu is Pyeongchon new town, the civic offices and the taller offices. The manufacturing base is spread across both, which matters when you are choosing where a Korean team would actually work.

  • Manan-gu. 233,711 residents across 14 dong, 36.56 square kilometres, and 646 firms employing 11,948 people, with one large employer. Printing, coatings, metal and the old industrial streets sit here.
  • Dongan-gu. 328,594 residents across 17 dong, 21.94 square kilometres, and 1,198 firms including three large employers. LS Tower, the knowledge industry centres and the Pyeongchon office district sit here.
  • Anyang Station anchors the old downtown retail and the Line 1 corridor toward Seoul. Beomgye and Pyeongchon anchor the office and civic side on Line 4.
  • Anyangcheon runs north through the city into the Han river system, with 34 kilometres of streams across the eight watercourses that drain Gwanaksan and Surisan.
Land use, share of the 58.50 square kilometres
64.29% Green37.61 km², including the 29.81 km² greenbelt
26.33% Residential15.40 km² of housing and neighbourhood streets
5.52% Industrial3.23 km² carrying the whole manufacturing base
3.86% Commercial2.26 km² of retail, office and civic floor
02 / The Economy On One Line

Five Stops That Explain What Anyang Sells

Anyang's industrial geography follows the two subway lines and the river. Read the five stops below as a single corridor from old downtown to the redevelopment frontier, because a buyer visiting the city will be driven along exactly this route.

Line 1 Anyang Station

The old downtown and its outdoor markets. 2,543 businesses are registered in Anyang 1 dong alone, the densest commercial cluster in the city. This is where the printing and coatings trades concentrated.

Line 4 Beomgye

The office and civic centre of Dongan-gu, five minutes from City Hall. Engineering firms, trading companies and the service layer that supports the factories sit around this stop.

Line 4 Indeogwon

The venture valley anchor. The 3.17 square kilometre promotion district runs from Myeonghak to Indeogwon along Gwanak ro, the sixth largest in the country, with 778 certified venture firms and four cluster buildings holding 197 tenants.

Line 1 Hogye and LS Tower

The heavy electrical anchor. LS Electric has been headquartered at LS Tower on LS ro since it was founded in 1974, and now employs about 3,204 people across power equipment, industrial automation and copper and stainless tube production.

Line 1 Bakdal

The redevelopment frontier in Manan-gu. A 397,065 square metre urban high tech industrial district is being planned on the ageing industrial streets from 2023 to 2033, with Noroo Paint named among the site stakeholders in the city working group.

Read the line as a supply chain, not a postcode. Design, certification, customer approval and export paperwork stay at the Korean end. Enclosure fabrication, harness assembly, moulded consumables, label printing and garment sewing move to a Philippine zone, and the finished goods return to Korea under the free trade agreement or ship directly to the end customer.
03 / Sector Pairing

Six Anyang Trades and the Philippine Step That Fits Each

Each card below names the Anyang side first, then the specific Philippine step that can be moved without breaking a customer approval. Nothing here is a wholesale relocation. It is a split of the value chain where transport cost is small and labour content is high.

Power equipment and switchgear

Anyang hosts Korea's largest power equipment and automation maker. Breakers, distribution panels, transformers and HVDC valves come off Korean lines in Cheongju, Cheonan and Busan under an Anyang head office. Export value reached KRW 1.10 trillion in the first half of 2026.

Philippine step: enclosures, busbars, harnesses, powder coating

Industrial automation and controls

The same base supplies PLCs, inverters, servos, HMIs and smart factory systems to automotive, battery, semiconductor and display plants. Panels are engineered in Korea and assembled into cabinets, often with imported components that carry long lead times.

Philippine step: control panel wiring, cable sets, sheet metal

Telecom and RF modules

Anyang carries an unusually dense telecom equipment cluster for a city this size: repeaters, optical modules, satellite receivers, antenna systems and broadcast transmission gear, mostly in small and medium firms inside the knowledge industry centres.

Philippine step: SMT assembly, antenna builds, functional test

Medical devices and biosensors

Blood glucose meters, biosensors and in vitro diagnostic reagents are made in Hogye and Gwanyang. These are regulated products, so the Philippine step has to sit inside an ISO 13485 quality system with a validated sterilisation and packaging route.

Philippine step: moulded consumables, kitting, packaging

Printing, packaging and coatings

Manan-gu still holds 19 printing and media reproduction plants, from label and sticker work to book and photobook production. Coatings manufacturing anchors the same district, and both trades share a labour intensive finishing step that scales badly inside a 3.23 square kilometre industrial base.

Philippine step: cartons, labels, flexible packaging, finishing

Apparel and technical textiles

Anyang's own garment factories supply uniforms, safety shoes and workwear to Korean industry. The Philippine side of that trade is already mature: knit and woven production, embroidery, sublimation and technical finishing for cleanroom, anti static and flame resistant programmes.

Philippine step: sewing, embroidery, technical finishing, kitting
04 / Cost And Incentive Frame

What Anyang Costs and What a Philippine Zone Replaces

The comparison below is deliberately narrow. It does not claim that a Philippine plant is cheaper on every line. It shows the four lines that decide where a volume order is placed, and the incentive structure that changes the payback period.

Anyang and Gyeonggi against a PEZA or BOI registered Philippine site
Line itemAnyang, GyeonggiPhilippine economic zone
Industrial land3.23 km² in total, inside the overconcentration control zone, with new supply arriving only through the Bakdal redevelopment to 2033.Ready built factory units and titled lots inside 441 PEZA zones and about 4,400 locators, with lease terms from three years.
Corporate income tax9 to 24 percent national rate by bracket, plus a 10 percent local surcharge on the national tax.20 percent under CREATE MORE (RA 12066), after a 4 to 7 year Income Tax Holiday and with 5 percent special corporate income tax or enhanced deductions for the following 10 years.
Production labourOperator wages in the USD 2,500 to 3,500 monthly band once statutory costs are loaded.Operator wages in the USD 280 to 360 monthly band at prevailing regional rates, with English language supervision available at every level.
Capital equipmentImported machinery is dutiable and subject to VAT, with depreciation at Korean rates.Duty free import of capital equipment and VAT zero rating on local purchases for registered export enterprises.
Export access to KoreaDomestic sale, no border.Zero duty on 94.8 percent of tariff lines under the Philippines Korea Free Trade Agreement, in force since 31 December 2024, with RCEP as a parallel route.
OwnershipFully open to Korean nationals, with capital region siting restrictions.100 percent foreign equity permitted for export enterprises shipping at least 60 percent of output, under RA 11647, and for zone locators under RA 7916.
Incentive runwayLocal venture certification gives a 50 percent acquisition tax cut and a 35 percent property tax cut, capped by municipal policy.Up to 27 years of combined incentives in the top CREATE MORE tiers, measured from registration rather than from first shipment.

Figures reflect published rates and the city statistics release of 31 October 2026. Wage bands are indicative and should be re quoted against the specific region, shift pattern and skill level before a business case is signed.

05 / The Move

Four Steps From an Anyang Boardroom to a Running Line

Every Korean client that has done this walked the same four steps in the same order. Skipping step one is the most common and most expensive mistake, because it produces a lease without the right to the incentives.

Register the entity and the incentive before the lease

Incorporate with the Securities and Exchange Commission, then apply to PEZA or the Board of Investments. CREATE MORE benefits attach to the registration, not to the building, so the sequence matters. Budget six to ten weeks for the corporate side and a further four to eight weeks for the incentive endorsement.

Pick the zone against the customer, not the rent

Clark suits air freight and a northern Luzon workforce. Laguna and Batangas suit the CALABARZON supplier base. Cebu suits export volume through Mactan. Confirm power capacity, effluent permits and the zone's approved industry list before signing anything.

Move the equipment under the duty free route

Capital equipment enters duty free and VAT zero rated for a registered export enterprise. File the import documents against the registration certificate, not against the parent company in Korea, and keep the customs broker briefed on the certificate of origin route for finished goods returning under the FTA.

Staff the line and dress it to Korean plant standard

Recruit through the zone's labour desk, then standardise uniforms, cleanroom garments, anti static footwear and identification before the first audit. A Korean customer walking a Philippine line expects the same visual discipline as the Anyang site, and that is a procurement decision, not a courtesy.

06 / Zone Fit

Four Philippine Sites That Suit an Anyang Manufacturer

These are not ranked. Each one solves a different constraint, and the right answer usually depends on whether the Korean parent ships by air, by sea, or sells into the domestic Philippine market alongside export.

Pampanga, three hours from Manila

Clark Freeport and New Clark City

The strongest fit for electronics, precision components and air freight. Clark International Airport takes cargo directly, the freeport has its own customs regime, and the surrounding labour pool is drawing from Pampanga, Tarlac and Nueva Ecija.

Best for automated line assembly where the finished unit is small and the value per kilogram is high.

Laguna and Cavite, CALABARZON

Laguna Technopark and the Calamba corridor

The deepest supplier base in the country for electronics, wire harnesses, moulded plastics and metal stamping. A plant here buys sub assemblies within a thirty minute drive, which shortens ramp up and reduces the import content of the first shipments.

Best for telecom modules, control panels and medical device consumables.

Batangas, port adjacent

First Philippine Industrial Park and Lima

Two large estates with dedicated utilities, effluent treatment and a workforce trained on automotive and consumer electronics quality systems. Batangas port is close, and the expressway run to Manila avoids the worst of the northern congestion.

Best for heavier assemblies, coatings, packaging and any line with meaningful water or effluent load.

Zambales and Cebu, two separate options

Subic Bay Freeport and Mactan Economic Zone

Subic gives a deep water port and a freeport regime on the west coast. Mactan gives Cebu's mature export manufacturing base, a short sea leg to Korea and an airport inside the zone system. Both suit companies that want a single site with port access at the gate.

Best for garment programmes, kitting and any operation shipping full containers weekly.

07 / Access And Freight

Getting From Anyang to a Philippine Gate

Anyang has no airport of its own, which is not a problem. Two Line 1 stops connect to the national network, Gimpo is a short road run, and Incheon is the long haul gateway that carries almost all of the Korea to Philippines passenger and cargo traffic.

The route map

  • Anyang to Seoul. Line 1 from Anyang Station and Line 4 from Beomgye, Indeogwon and Pyeongchon reach central Seoul in roughly 30 to 45 minutes, which is why a third of the working population commutes.
  • Anyang to Gimpo. About 22 kilometres by road, or Line 4 to a Line 9 interchange. Gimpo handles the short haul network, not the Manila route.
  • Anyang to Incheon. About 55 kilometres by expressway, or Line 1 to the Airport Railroad Express interchange. Allow 70 to 90 minutes door to terminal.
  • Incheon to Manila. Nonstop in about four hours, with several daily departures across Korean and Philippine carriers. The time difference is one hour, so a single working day covers both sites.
  • Sea freight. Busan to Manila runs about 7 to 10 days on direct container service. Incheon adds a short feeder leg and a day or two of schedule.

What crosses the border

  • Free trade agreement. In force since 31 December 2024, eliminating duty on 94.8 percent of tariff lines. Form AK or the RCEP equivalent carries the preference, and the origin rule is a change in tariff heading or 40 percent regional value content.
  • Bilateral scale. Goods trade ran about US$15.1 billion in 2025. Korean investment approvals reached ₱25.37 billion in the first quarter of 2026, 59.51 percent of the national total.
  • Electronics weight. Philippine electronics exports reached US$49.64 billion in 2025, 58.81 percent of merchandise exports, which is the sector where a Korean component supplier is most likely to find a customer.
  • European back door. EU GSP+ gives zero duty on Chapters 61 and 62 until the scheme ends in 2027, which is a dated advantage for any garment programme routed through the Philippines.
08 / Residence

Residence for the Household That Follows the Plant

Anyang families tend to split the year rather than emigrate. The working spouse holds the Philippine entity and a work visa, the household holds a long stay visa, and the Anyang apartment stays in the family for the Korean summer and the school year.

Which route fits which household

  • Working director. 9(g) prearranged employment visa with an Alien Employment Permit, issued against the Philippine entity. This is the correct route for anyone drawing a salary from the local company.
  • Zone executive. 47(a)(2) special investor visa for PEZA and BOI endorsed executives, which is simpler than 9(g) for a senior appointee who moves between sites.
  • Retired couple. SRRV from age 40, with a lower deposit band from age 50. Requires a pension, or the higher deposit where there is none.
  • Investor. SIRV at US$75,000 of qualifying investment, for a household that wants the investment itself to carry the status.
  • Dependants. Spouse and unmarried children under 21 follow the principal visa. Schooling is available in Manila, Clark, Cebu and Davao, with Korean curriculum options in the larger cities.

Visa thresholds

  • SRRV, age 40 to 49 with pension US$25,000
  • SRRV, age 40 to 49 without pension US$50,000
  • SRRV, age 50 and above with pension US$15,000
  • SRRV, age 50 and above without pension US$30,000
  • SRRV, former Filipino citizen US$1,500
  • SIRV, investment visa US$75,000
  • Tourist entry, Korean passport 30 days, extendable at the Bureau of Immigration

Deposits are held with the Philippine Retirement Authority and are convertible into qualifying property. Confirm the current schedule before filing, because the bands are revised by memorandum rather than by statute.

09 / Plant Supply

Dressing a Korean Standard Line With Philippine Made Garments

A new zone plant needs a uniform programme before the first customer audit, not after. Our production runs the same specification stack a Korean factory expects: colour match, identification, department kitting and a documented care label.

  • Plant and warehouse. Polo shirts, work trousers, cargo workwear and high visibility vests with department colour coding and embroidered names.
  • Technical programmes. Anti static smocks and ESD garments for electronics lines, cleanroom coveralls for medical device assembly, and flame resistant coveralls for coatings and metal work.
  • Quality control. Pantone colour matching within a tolerance of 2.0 delta E, bilingual labelling, and serialised carton packing for multi site delivery.
  • Commercial terms. Minimum order of 12 pieces per design, sampling in about two weeks, bulk production in four to six weeks after artwork approval, and BIR compliant invoicing for the Philippine entity.
₱320.00
about $5.10 / €4.45 / £3.85 per unit

Entry price for standard shop floor garments, converted at the live rate and settled in the currency chosen in the header switcher. Technical fabric specifications for ESD, cleanroom and flame resistant programmes are quoted separately against the technical sheet.

10 / Questions

What Anyang Clients Ask Before They Commit

Eight questions that come up in almost every first call, answered with the numbers we use in a business case rather than the marketing version.

Why would an Anyang manufacturer look outside Korea at all?

Land. Anyang sits entirely inside the Seoul capital region overconcentration control zone, greenbelt covers 29.81 of its 58.50 square kilometres, and industrial land is 3.23 square kilometres already carrying 1,847 firms. The only new supply is the Bakdal redevelopment, which runs to 2033. A company that wins a volume order has no way to add floor area quickly inside the city, so the expansion goes offshore while the Korean site keeps design, approval and export control.

Does Anyang have an airport?

No. Anyang has no commercial airport. Gimpo is about 22 kilometres by road and Incheon International is about 55 kilometres, which is 70 to 90 minutes door to terminal. Line 1 and Line 4 connect the city to central Seoul in roughly 30 to 45 minutes. Incheon to Manila is a nonstop four hour flight, and the one hour time difference means both offices share a working day.

What does CREATE MORE actually give a Korean investor?

Under Republic Act 12066, a registered enterprise pays 20 percent corporate income tax instead of the 25 percent standard rate, after an Income Tax Holiday of four to seven years depending on location and sector. The following ten years carry either a 5 percent special corporate income tax on gross income or enhanced deductions. Capital equipment enters duty free, local purchases are VAT zero rated, and the top tiers reach 27 years of combined incentives. The benefit attaches to the registration, so the entity and the incentive have to be in place before the lease is signed.

Can a Korean company own the Philippine plant outright?

Yes, for export manufacturing. RA 11647 permits 100 percent foreign equity where the enterprise exports at least 60 percent of output, and PEZA locators under RA 7916 have their own route. The US$100,000 paid in capital floor applies to qualifying domestic market enterprises rather than to the export case. Land ownership stays restricted, so the practical structure is a long term lease inside a zone, which is what most Korean manufacturers do in Vietnam and Indonesia as well.

How long does the whole move take?

Six to ten weeks for the Securities and Exchange Commission registration, four to eight weeks for the PEZA or BOI endorsement, eight to sixteen weeks for fit out of a leased unit, and four to eight weeks for recruitment and line qualification. A realistic first shipment from a decision made today is nine to twelve months. Companies that lease first and register second lose two to four months to the sequencing error.

Is the Philippines competitive with Vietnam for this kind of work?

On direct labour cost Vietnam is usually lower. The Philippine case rests on English at every level, a legal system close to the United States model, a free trade agreement with Korea since 31 December 2024, duty free entry for capital equipment, and a domestic market of 115 million people with a median age of 25.7. For a Korean firm whose customer interface, audits and documentation are in English, the supervision and quality cost usually closes the gap.

What can we ship back to Korea without duty?

Under the Philippines Korea Free Trade Agreement, 94.8 percent of tariff lines are eliminated. The preference requires a certificate of origin, either Form AK or the RCEP equivalent, and the origin test is a change in tariff heading or 40 percent regional value content. Components imported from outside the region can break the value test, so the bill of materials has to be checked before the first shipment rather than at customs.

Can RB Advertising supply the plant as well as advise on the site?

Yes. We manufacture workwear, technical garments and corporate uniforms in the Philippines and deliver to zone gates at Clark, Laguna, Batangas, Subic and Mactan. Minimum order is 12 pieces per design, standard shop floor garments begin at ₱320.00 per unit, about $5.10, €4.45 or £3.85 at the live rate, sampling runs about two weeks, and bulk production takes four to six weeks after artwork approval. Orders ship with Pantone matching, bilingual labelling and serialised carton packing for multi site delivery.

11 / Commercial Desk

Talk with RB Advertising

For Anyang investors, plant managers and procurement teams, our commercial desk handles site questions, sample kits, technical garment specifications and direct delivery to Philippine zone gates.

Office hours: Mon to Sat, 8:30 AM to 5:00 PM (PHT). Main Office: Naungayan Building, Aala Road, Barangay Mankilam, Tagum City, Davao del Norte, Philippines. Cagayan de Oro office: Ficcoville, Iponan, Cagayan de Oro City.