Team Glock Full Sublimation T-Shirt
Engineered for practical shooting competitors, gun club teams, and tactical firearms enthusiasts across the Philippines. Built from certified moisture-wicking micro-mesh polyester with all-over dye sublimation that never cracks or peels, paired with unrestricted athletic patterning designed for rapid holster draws and dynamic shooting stages.
High Definition Sublimated Jersey 
Engineered Textiles for Tropical Shooting Bays
Competitive shooting stages in the Philippines demand peak heat regulation under intense humidity. Our high performance textiles provide continuous moisture dissipation, UV protection, and long term endurance.
Micro-Capillary Moisture Wicking
Engineered micro-polyester yarns draw perspiration away from the skin instantly to the fabric outer surface, accelerating rapid air drying even during grueling multi-stage Level III tournaments.
UPF 35 to 50+ Solar Radiation Guard
Certified ultraviolet protection shields your upper body during open range sun exposure. Blocks up to 98 percent of harmful UVA and UVB rays without trapping body heat inside the garment.
Belt & Holster Abrasion Resistance
Friction-resistant knit density guards against fabric pilling and fraying caused by stiff Kydex holsters, magazine pouches, heavy competition double-belts, and tactical rifle sling contact.
Tailored for Rapid Target Acquisition and Movement
Designed around the biometric mechanics of competitive shooting disciplines including PPSA, IPSC, IDPA, and Steel Challenge, delivering unrestricted freedom in every presentation.
- 01
Full Four-Way Dynamic Mobility
Flexible mechanical weave prevents shoulder or lat restriction when establishing a two-handed modern isosceles grip, transitioning through awkward barricade angles, or shooting from low kneeling positions.
- 02
Extended Drop-Tail Rear Hem
Cut with an elongated rear hem profile that stays firmly seated beneath competition inner and outer belts during rapid sprints between shooting boxes, low crouching, and explosive starts.
- 03
Chafe-Free Flatlock Seam Reinforcement
Four-thread interlock stitching along shoulders and armholes lies flat against the body, eliminating skin friction when carrying plate carriers, chest rigs, or loaded range bags.
- 04
Anti-Microbial Odor Control Treatment
Specialized textile finish halts bacterial colonization from dried sweat, keeping team jerseys fresh across back-to-back weekend match fixtures and intense shooting clinics.
Complete Team Glock Personalization
Every team jersey is tailored to your squad specifications. We seamlessly integrate individual shooter calls, competition aliases, PPSA or IPSC membership numbers, Philippine flag tactical sleeve insignias, regional gun club crests, and corporate sponsor emblems with exact color matching.
- Custom Shooter Callsign & Back Name Placement
- PPSA / IPSC / IDPA Member ID & Category Badges
- Philippine Tactical Subdued or Full-Color Flag Sleeves
- Gun Club Chapters, Arms Dealers & Sponsor Logos
Collar Configurations Built for Hot Brass Defense
Select the ideal collar archetype based on your match rules, personal preferences, and firing line environmental protection needs.
Tactical Quarter-Zip Stand Collar
The definitive choice for practical shooting competitors. The elevated mandarin stand collar seals the neckline against flying hot cartridge brass expelled from neighboring shooting bays, preventing painful skin burns during rapid-fire strings.
- Hot spent brass deflection barrier for firing lines
- Smooth-glide nylon zipper with soft chin-guard fabric backing
- Adjustable ventilation during intense midday range temperatures
- Professional tournament jersey appearance on podiums
Athletic Reinforced Crew Neck
A classic, low-profile athletic collar engineered for gun club training days, recreational shooting ranges, firearm safety seminars, and everyday tactical casual wear.
- Double-stitched ribbed neckband that retains shape after machine washing
- Maximum lightweight breathability around the throat and collarbone
- Optimal for training drills, firearm safety courses, and daily wear
- Ultra-fast drying profile with zero hardware weight
Specification Matrix: Full Sublimation vs Generic Range Wear
See why high definition full dye sublimation outperforms conventional cotton tees and silkscreened merchandise on competitive shooting courses.
| Performance Parameter | PhShirt Team Glock Sublimation | Standard Cotton Tee | Silkscreened Sports Shirt |
|---|---|---|---|
| Print Longevity | Permanent Fiber Bond (Never peels or cracks) | Cracks and fades after 15 to 20 laundry cycles | Heavy ink layers split and flake under stretch |
| Airflow & Breathability | 100% Breathable (Zero pore blockage) | Traps moisture and becomes heavy when soaked | Rubberized ink creates solid sweat patches on chest and back |
| Belt Rig Abrasion | Reinforced Micro-Mesh (Pill resistant) | Forms pills rapidly against Velcro and Kydex edges | Prints scuff and abrade from holster rubs |
| Hot Brass Protection | Optional stand collar blocks falling cartridge casings | Open neck allows hot casings down shirt | Standard crew neck offers zero brass defense |
| Drying Speed | Instant capillary evaporation (15 to 20 minutes) | Slow drying (2 to 3 hours under high humidity) | Moderate drying, ink backing holds sweat |
| Personalization | Free custom name, callsign, shooter ID, and sponsor layout | Requires expensive per-screen film setups | Cost increases per color and per individual name |
Standardized Unisex Shooting Jersey Size Guide
Measured flat across the chest and down the front spine. For competitors wearing inner competition belts and tight mag pouches, we recommend verifying chest measurements below.
| Size Tag | Chest Width (Inches) | Chest Width (Centimeters) | Body Length (Inches) | Body Length (Centimeters) | Recommended Chest Circumference |
|---|---|---|---|---|---|
| XS | 18.0 in | 45.7 cm | 25.5 in | 64.8 cm | 34 to 36 inches |
| S | 19.0 in | 48.3 cm | 26.5 in | 67.3 cm | 36 to 38 inches |
| M | 20.0 in | 50.8 cm | 27.5 in | 69.8 cm | 38 to 40 inches |
| L | 21.0 in | 53.3 cm | 28.5 in | 72.4 cm | 40 to 42 inches |
| XL | 22.0 in | 55.9 cm | 29.5 in | 74.9 cm | 42 to 44 inches |
| 2XL | 23.0 in | 58.4 cm | 30.5 in | 77.5 cm | 44 to 46 inches |
| 3XL | 24.0 in | 61.0 cm | 31.5 in | 80.0 cm | 46 to 48 inches |
| 4XL | 25.5 in | 64.8 cm | 32.5 in | 82.5 cm | 48 to 51 inches |
| 5XL | 27.0 in | 68.6 cm | 33.5 in | 85.1 cm | 51 to 54 inches |
Transparent Four-Currency Volume Pricing
We publish clear rates for individual custom pieces, squad sets, gun club batches, and regional tournament orders. In accordance with our store standards, pricing is shown in Philippine Pesos, US Dollars, Euros, and British Pounds.
Individual / Sample
About €6.25 EUR
About £5.35 GBP
- Full custom shooter name and number
- Choice of crew neck or v-neck
- 24 to 48 hour digital proof turnaround
- Nationwide express courier dispatch
Squad Batch
About €5.30 EUR
About £4.50 GBP
- Individual roster customization included
- Quarter-zip collar option available
- Team sponsor logo vector layout
- Priority 5 to 7 working day fabrication
Gun Club Tier
About €4.45 EUR
About £3.85 GBP
- Maximum volume efficiency rate
- Free sizing sample shirt provided
- Full chapter emblem & flag sublimation
- Official BIR 2307 receipt compliance
Tournament Level
About €3.90 EUR
About £3.35 GBP
- Institutional federation pricing
- Dedicated account project manager
- Serialized carton packing by squad division
- Scheduled logistics handover
Seamless Four-Stage Fabrication Workflow
We combine rapid digital graphic preparation with industrial sublimation heat presses to ensure your team takes the firing line on time.
Design & Proof Approval
Submit your team roster, callsigns, preferred Team Glock layout, and chapter logos. Our design atelier delivers high fidelity digital 3D mockups within 24 to 48 hours for your approval.
High Resolution Print
Approved designs are plotted onto premium Japanese transfer sheets using ultra vibrant dye sublimation inks, delivering pinpoint graphic clarity, crisp typography, and rich black contrasts.
Molecular Heat Transfer
At 200 degrees Celsius under uniform pneumatic pressure, solid ink converts directly into gas, permanently embedding into the polyester fibers for zero hand feel and lifetime colorfastness.
Assembly & Dispatch
Precision cut panels are stitched using reinforced four-thread overlock machinery. Every jersey undergoes manual inspection before dispatching nationwide via accredited air and land couriers.
Frequently Asked Questions
Everything you need to know about fabric specifications, customization capabilities, order minimums, and shipping across the Philippines.
Can each shirt have an individual shooter name, alias, and number?
Why is a tactical quarter-zip stand collar recommended for the firing range?
Will the sublimated Team Glock graphics fade or peel over time?
What is the minimum order quantity for Team Glock shirts?
How long does production and delivery take?
How do you handle shipping to provincial shooting clubs outside Metro Manila?
What are the best laundry and care instructions for shooting jerseys?
Start Your Team Glock Jersey Project Today
Get in touch directly through any of our verified corporate channels for fast digital mockups, sizing assistance, and official squad quotations.