Independent supplier dossier / 한세실업
Hansae Co., Ltd. (한세실업): Apparel Manufacturing and the Philippine Investment Case
Hansae is the Korean contract manufacturer that puts clothes on shelves in New York, London and Seoul. It cuts and sews about 400 million garments a year across Vietnam, Indonesia, Myanmar and Central America, and it has done it for Gap since 1991. This page reads the operating model the way a site selection team would, then asks the question the model invites: where does the next production base go, and why does the Philippine square deserve a serious look?
The company behind the label nobody reads
A contract manufacturer is judged on three numbers: how much it ships, who it ships for, and how many countries it can move between. Hansae is unusual on the third. It is not a single factory with a sales office. It is a sourcing system with design, fabric, sewing, quality and freight sitting in different countries, and that system is the product a brand actually buys.
- Legal identity
- Hansae Co., Ltd. (한세실업), a Korean corporation listed on the Korea Exchange. It was separated from Hansae YES24 Holdings in 2009, and that holding company and related parties hold about 64.7 percent of the shares.
- Founded
- 1982, as an apparel exporter. The first overseas subsidiary opened in Saipan in 1988. Vietnam followed in 2001, Indonesia in 2005 and Myanmar in 2013, while Central America was entered from 1998.
- Headquarters
- 29 Eunhaeng-ro, Yeongdeungpo-gu, Seoul. Design and research staff sit in Seoul, New York, Los Angeles and Barcelona, close to the buyers and the trend cycle rather than close to the machines.
- Financial scale
- Revenue of KRW 1.80 trillion in 2024, about USD 1.3 billion, with operating profit of KRW 142.2 billion. The business is volume driven and margin thin, which is exactly why factory location is a board level question and not a procurement detail.
- Output and buyers
- About 400 million garments a year across more than 30 product categories, supplied to 30 or more global buyers. The named relationships include Gap since 1991 and Gap Supplier of the Year in 2024, Old Navy, Banana Republic, Target with an Outstanding Partner award in 2022, Zara and Ralph Lauren.
- People
- More than 50,000 across 15 or more countries, around 99 percent of them outside Korea. Roughly 700 sit in Seoul and about 35,000 in overseas plants, with partner factories lifting the working population to about 50,000.
- Footprint
- 10 countries, 30 corporations and 7 offices as of the second quarter of 2025. Apparel plants run in Vietnam, Indonesia, Myanmar, Nicaragua, Guatemala, Haiti and El Salvador. Fabric operations sit in Vietnam, Guatemala and the United States.
- Model
- Original design manufacturing as well as original equipment manufacturing. Hansae develops the garment, the fabric and the fit, then makes it. That is a different business from a pure cut and sew subcontractor, and it explains why fabric investment keeps appearing in its announcements.
Why the fabric layer matters
Hansae bought into fabric rather than staying a sewing room. C&T Vina in Binh Phuoc dyes and finishes up to 120,000 kilograms a day, C&T G-Tech handles garment dyeing and washing, Color and Touch trades fabric, and Texollini in California added technical knit capability in 2024. A group that owns the fabric stage controls lead time, margin and, increasingly, the traceability that buyers demand.
Hold that thought. It is the single most useful lens for reading the Philippine opportunity later on this page.
How a garment moves through the group
Five stages, five different sets of country risk. A site selection team looks at the chain and asks which stage can be added in a new country first, because the answer decides the size of the investment and the speed of the return.
Design and development
Seoul and New York research teams turn a buyer brief into a tech pack, a fabric proposal and a fit set. This is where an ODM supplier earns the right to quote on the next season.
Location logic: near the buyer, not the factoryFabric
Knitting, dyeing, finishing and print sit in Vietnam, Guatemala and the United States. C&T Vina runs the largest dyeing floor, and EcoSpin in Guatemala extended the same logic to the western hemisphere.
Location logic: water, power, chemistry, scaleCut and sew
Seven apparel countries carry the sewing load. Vietnam alone takes more than half of group output across Cu Chi, Tay Ninh and Tien Giang, with Indonesia, Myanmar, Nicaragua, Guatemala, Haiti and El Salvador filling regional roles.
Location logic: labour, duty, freightQuality and compliance
Resident quality managers, a self inspection programme, in line and final audits, chemical management and buyer specific scorecards. A factory that fails an audit loses the season, not just the order.
Location logic: management depth, not machinesConsolidation and freight
Cargo leaves Ho Chi Minh, Jakarta, Yangon, Managua, Guatemala City and Port au Prince for US, European and Asian accounts. The routing decision is made per programme, and it is where a new country either fits or does not.
Location logic: sailing schedules and port dwellThe sequencing lesson
No group opens a fabric mill before it has sewing volume in the country. The entry point is always cut and sew, and the vertical layer follows once the order book is real. For the Philippines, that means the pitch should start with a sewing cell and a pilot programme, not with a dyehouse on a slide.
The map is wide, and still concentrated
Hansae already runs a multi country model, which is the point. The remaining question is not whether diversification is useful, but which square is missing. Read the four production blocks as a buyer would.
Vietnam
More than half of group output, with three sewing entities plus the fabric complex. Vietnam is the engine, and that is the exposure: wages have climbed for a decade, and US tariff policy now lands on the largest block first.
Engine and single point of failureIndonesia
The second ASEAN base, with plants in West Java and Central Java and a domestic market that absorbs some of the region's own production. Scale is real, but the country is already carrying a large share of the group's ASEAN capacity.
Established second baseMyanmar
Two entities, used for cost sensitive volume. Political risk, banking friction and buyer scrutiny make Myanmar a capacity to manage rather than a base to expand without a hedge.
Cost hedge with governance riskCentral America
Nicaragua, Guatemala, Haiti and El Salvador serve the United States on short sailing times and preferential arrangements. This is the nearshore block, and it is the reason the group can serve two hemispheres from one design book.
Nearshore to the US marketThe square that is missing
Look at what the map covers. It has a low cost ASEAN block, a nearshore block for the United States, and fabric in both hemispheres. It does not have a Southeast Asian base that is English speaking, has a young workforce, sits inside a free trade agreement with Korea, and reaches the European Union at preferential duty on apparel at the same time.
That combination is the Philippine square. It is not a cheaper version of Vietnam. It is a different risk profile, and risk profile is what a brand buys when it splits a programme.
Four instruments decide the structure
A garment investor does not need a slogan. It needs to know who can own the asset, what tax applies, where the zone is and which markets open duty free. The Philippines has moved on all four since 2022, and the Korea agreement has been in force since 31 December 2024.
Ownership
The amended Foreign Investments Act allows up to 100 percent foreign equity in export manufacturing outside the negative list. A Korean apparel group can own its Philippine plant outright rather than working through a local majority partner.
RA 11647, Foreign Investments ActTax
Under CREATE MORE, a registered project can claim a 4 to 7 year income tax holiday, then 20 percent corporate income tax on net taxable income, or 5 percent special corporate income tax for export oriented projects. Duty free import of capital equipment and VAT zero rating on local purchases support the build.
RA 12066, CREATE MOREZone
PEZA registration gives an export manufacturer a bonded customs regime, duty free raw material imports and a serviced industrial estate. The zone system reported 441 economic zones and about 4,400 locators in 2026. Projects outside a zone can register with the Board of Investments instead.
RA 7916, PEZA Act, and BOI registrationMarket access
The Philippines Korea free trade agreement removed tariffs on 11,164 Philippine products worth about USD 3.18 billion, with staging by product line. RCEP adds cumulation across member countries, and the European Union GSP+ arrangement gives covered apparel lines preferential entry while the current scheme runs.
PH Korea FTA, RCEP, EU GSP+What a board should test before it signs
Incentives attach to a registered project, not to a passport. The registration test, the location and the product line decide eligibility, and the tariff schedule is staged by HS code. Model the duty line by line, confirm the rules of origin for the fabric you intend to buy, and treat any incentive projection as a scenario rather than a guarantee.
What the Philippines can carry today
The country is not a blank sheet. It has a garment sector with buyers, auditors and export paperwork already in place. What it does not have is depth in fabric. Read the sheet honestly, because a site selection team will.
- Cut and sew
- Available at scale. Metro Manila, CALABARZON (Laguna, Cavite, Batangas), Cebu, Pampanga and the Davao Region all run garment lines. Uniforms, workwear, knit tops, woven bottoms and activewear are routine. Technical outerwear is thinner and needs a sample led conversation.
- Sample room
- Available, capacity constrained. A simple style runs 7 to 10 days. A bonded or seam sealed technical style takes longer, and the sample room is usually the first bottleneck in a new programme.
- Knit and woven fabric
- The structural gap. Most fabric is imported from China, Taiwan, Korea and Vietnam. That works for speed, but it weakens yarn forward origin claims and adds two to four weeks of lead time to every programme.
- Dyeing and finishing
- Limited. There is no domestic equivalent of a C&T Vina. A knit dye and finish plant, sized for export volume, is the largest single opening in the sector and the natural second phase for any investor who starts with sewing.
- Decoration
- Strong. Sublimation, screen print, direct to film, embroidery and heat transfer are all commercially available, which suits teamwear, uniforms and private label programmes that need short runs.
- Quality and compliance
- Present, uneven. Buyer audits, social compliance and chemical management exist across the larger factories. A new investor should audit a prospective partner with the same checklist the end buyer will use.
- Workforce
- English speaking and young. Operators are trainable quickly and communication with a Korean or US office is direct. Pattern makers, sample technicians, mechanics and quality managers are the thin ranks, so budget for a training pipeline.
- Logistics
- Workable, with buffers. Manila, Batangas, Subic, Cebu and Davao handle export cargo. Sea freight to Busan or Incheon books in 7 to 18 days depending on the port pair, and air cargo reaches Korea in 1 to 3 days.
- Power
- The weak point. Industrial electricity is among the highest in ASEAN, and a dyehouse is energy and steam heavy. A sewing only plant absorbs this better than a vertical one, which is another argument for staging the investment.
Four things a model has to pay for
A promotional page that hides the cost of a country is useless to the person who has to sign the capital request. These are the four lines that decide whether a Philippine plant beats a Vietnamese one on total landed cost.
Fabric depth
Importing greige or finished fabric can forfeit a preference claim under yarn forward rules, and it adds ocean time before the cutting table sees a roll. The fix is either a fabric partner on site or a sourcing model that accepts the duty.
Energy cost
Power and steam pricing is the difference between a competitive dyehouse and an uncompetitive one. Any vertical plan needs a real utility quote, not an assumption carried over from Vietnam.
Technical skills
Operators are available. Pattern makers, sample hands, mechanics and quality managers are not, in the numbers a 300 machine line needs. Training time is a capital cost and belongs in the ramp curve.
Island logistics
Inter island freight, port dwell and typhoon season all add buffer stock. A programme that runs on four week replenishment can absorb this. A programme that runs on air freight for everything cannot.
None of these is a reason to skip the country. Each is a line item, and each has a known mitigation. That is a very different situation from a market where the risk cannot be priced.
A four phase entry path, in work order form
This is the sequence a group like Hansae would run if it added the Philippines to a live sourcing map. The phases are planning assumptions, not promises, and each one should be allowed to stop the next.
Desk study
Brief PEZA and the Board of Investments, model the incentive under CREATE MORE, check the HS lines and the rules of origin, then shortlist three zones against freight and labour catchments.
2 to 4 weeksPilot order
Place 500 to 2,000 pieces with an existing line. Test the sample room, the quality gate, the export paperwork and the sailing schedule before committing to a lease.
6 to 10 weeksOwn cell
Lease inside a PEZA zone, install 100 to 300 machines, recruit and train, and run a single buyer programme end to end. Prove the cost sheet before adding a second buyer.
6 to 12 monthsVertical layer
Add knitting, dyeing and finishing, alone or with a Korean fabric partner. This is where margin, lead time and origin compliance improve together, and it is the phase that turns a sewing plant into a base.
18 to 36 monthsThe pilot is the cheapest piece of evidence
A pilot order costs a fraction of a site visit programme and produces something a board cannot argue with: a garment, a lead time and a landed cost. If the pilot works, the lease conversation gets easier. If it does not, the group has spent a season instead of a factory.
Where our own line fits
We are RB Advertising, a cut and sew operation in Tagum City, Davao del Norte. We are not a conglomerate and we do not pretend to be one. What we offer a company testing the country is a working floor, a sample room and an export desk that already ships to Korea.
What we make
- Corporate and institutional uniforms
- Technical workwear and safety apparel
- Rash guards, jerseys and teamwear
- Private label cut and sew programmes
How we run
- Samples in 7 to 10 days
- Bulk in 3 to 6 weeks after approval
- Uniform programmes from 12 pieces
- Sizing, labelling and packing to the buyer spec
How we ship
- Air cargo to Incheon or Busan in 1 to 3 days
- Sea freight in 7 to 18 days
- Commercial invoice, packing list and origin documents
- Repeat orders are simpler than first orders
For a group testing the country, a local line removes the first risk. You can place the pilot order here, inspect the floor, and decide on a zone lease with production evidence in hand rather than a slide deck. For a Philippine brand or institution, the same floor is the shorter route to a finished programme.
Hansae and the Philippines, answered
Does Hansae have a factory in the Philippines?
Not in any published record as of November 2026. Hansae's disclosed apparel plants sit in Vietnam, Indonesia, Myanmar, Nicaragua, Guatemala, Haiti and El Salvador, with fabric operations in Vietnam, Guatemala and the United States. This page is an independent analysis of the fit between its model and the Philippine production base. It is not an announcement by Hansae, and it is not affiliated with the company.
How large is Hansae?
Revenue was KRW 1.80 trillion in 2024, about USD 1.3 billion, with operating profit of KRW 142.2 billion. The group produces about 400 million garments a year and employs more than 50,000 people across 15 or more countries, about 99 percent of them outside Korea.
Who does Hansae manufacture for?
More than 30 global buyers across 30 or more product categories. The named relationships include Gap since 1991, Old Navy, Banana Republic, Target, Zara and Ralph Lauren, and Hansae was named Gap Supplier of the Year in 2024 and a Target Outstanding Partner in 2022.
Why add the Philippines when Vietnam already works?
Because one country carrying more than half of group output is a single point of failure. Vietnam faces rising wages and concentrated US tariff exposure, Myanmar carries governance risk, and the Central America block serves a different hemisphere. The Philippines adds an English speaking workforce, a young population, Korean and EU trade access, and a different set of ports.
What incentives apply to a garment factory?
Under CREATE MORE a registered project can claim a 4 to 7 year income tax holiday followed by 20 percent corporate income tax or 5 percent special corporate income tax, plus duty free capital equipment. PEZA registration adds a bonded customs regime for export manufacturing, and the amended Foreign Investments Act allows up to 100 percent foreign equity outside the negative list.
Can Philippine factories handle the quality?
For uniforms, workwear, knit tops, woven bottoms, activewear and decorated teamwear, yes. The sector already runs buyer audits and export programmes. Technical outerwear and complex bonded styles are thinner, and fabric is mostly imported, which is why a pilot order is the right first test rather than a capacity claim.
What is the weakest link in the Philippine case?
Fabric. The country imports most of its knit and woven fabric, so lead time grows and yarn forward origin claims get harder. Power cost is the second weak link, particularly for a dyehouse. Both are solvable with a staged investment, and both should be priced before a lease is signed.
How do I test the market without committing capital?
Place a pilot order with an existing line, usually 500 to 2,000 pieces, and inspect the floor while it runs. That produces a sample, a lead time and a landed cost in six to ten weeks. A Philippine uniform programme can start from as few as 12 pieces, which makes the first test unusually cheap.
The Korean and Philippine files around this page
Produce in the Philippines, for Korea and for Korean buyers
We make corporate uniforms, technical workwear and private label apparel in Tagum City, Davao del Norte, and we work with Korean buyers on sizing, labelling, packing and export documents. Tell us what the order or the programme looks like and we will price it against a real production line. Office hours: Mon to Sat, 8:30 AM to 5:00 PM (PHT). Address: Naungayan Building, Aala Road, Barangay Mankilam, Tagum City, Davao del Norte, Philippines.
Sources and scope: Hansae company history, output, headcount, footprint, buyer relationships and 2024 financial figures follow the Hansae investor relations material for 2024 and 2025 and the Hansae YES24 Group sustainability report for 2025. Buyer awards and plant locations are reported by Hansae and by Korean business press, including Maeil Business News and Businesskorea. Philippine investment terms follow CREATE MORE (RA 12066), the amended Foreign Investments Act (RA 11647), the PEZA Act (RA 7916), the Board of Investments, the Philippine Economic Zone Authority and the Department of Trade and Industry. Trade terms follow the Philippines Korea free trade agreement in force since 31 December 2024, the Regional Comprehensive Economic Partnership and the European Union GSP+ arrangement. Wage and zone figures are the reference values used across our Korea market pages. This page is an independent market analysis. It is not affiliated with, endorsed by, or authorised by Hansae Co., Ltd., and it does not describe any announced Philippine facility or investment by that company. Nothing here is legal, tax or investment advice. Confirm current requirements with the investment promotion agency, the zone authority, the customs authority and a licensed professional before committing funds.
