Pohang, Gyeongsangbuk Province, South Korea
Pohang: Steel City, Materials Cluster and the Philippine Manufacturing Base
Pohang built the mill that made Korea an industrial economy, and it now runs one of the largest integrated steelworks in the world across 18.76 million tonnes of nominal capacity. The next chapter is not more steel. It is battery materials, hydrogen and the advanced metals that sit between ore and finished product. Every one of those chains begins with a raw material the Philippines holds in volume and processes almost none of. This page sets out the mill, the pivot, the gap and the case for a Philippine base.
Pohang, measured six ways
Pohang sits on the east coast of Gyeongsangbuk Province, facing the East Sea, with Gyeongju to the south and Ulsan beyond it. It is the province's largest city, the seat of the country's first integrated steelworks, and a place that has spent fifty years learning how to move heavy material through a harbour. A Korean board evaluating a Philippine plant usually knows the mill before it knows the map, because the components in its products started here. The six cells below are the ones that decide a site visit.
Sources: Pohang City resident registration statistics for October 2026, Statistics Korea, the Pohang Regional Office of Oceans and Fisheries, POSCO sustainability reporting, Global Energy Monitor plant data, and the Pohang City hydrogen cluster briefing of March 2026.
The mill that made the city, and the arithmetic it now faces
Pohang Iron and Steel was founded in 1968 with Japanese reparations money and a national bet that a country without ore or coking coal could still make steel. The first blast furnace tapped in 1973. Fifty years later the plant casts hot rolled coil, plate, wire rod, electrical steel and stainless from a harbour that unloads ore and coal on one side and loads finished coil on the other. That is an extraordinary concentration of metallurgical skill, and it is also a concentration of risk.
Pohang Works produced about 15.75 million tonnes of crude steel in 2024 against 18.76 million tonnes of nominal capacity. It runs blast furnaces fed by sinter, an electric arc furnace fed by scrap, and a commercial FINEX line that skips the sinter and coke stages by feeding ore fines and coal directly into a melter gasifier. FINEX is the technology POSCO developed to cut cost and emissions from ironmaking without rebuilding the whole plant.
15.75 Mt produced against 18.76 Mt of capacity in 2024Pohang Port exists to serve the mill. Shinhang, the new port, handles about 88 percent of the iron ore and coal that enters the complex, with berth depths to 19.5 metres that take 250,000 deadweight bulk carriers. Iron ore alone accounted for about 19 million tonnes of the 2024 cargo. The total for the year was about 48 million tonnes, down 3.7 percent, against a declared handling capacity of 91.3 million tonnes a year.
About 48 Mt of cargo in 2024, 88 percent of it ore and coal inwardsThe 2024 decline was not a demand story alone. Blast furnace four came off line for a relining, the third FINEX plant suffered a fire, and ore imports fell with them. The port authority expected volumes to recover after repairs completed in September 2025. The wider Korean steel sector tells the same story in bigger numbers: national crude steel output fell from 67 million tonnes in 2023 to 64 million tonnes in 2024, and to 31 million tonnes in the first half of 2025, against Chinese overcapacity and United States tariffs.
Korean crude steel 67 Mt in 2023, 64 Mt in 2024, 31 Mt in the first half of 2025Pohang's economy is steel, and steel is one product family in one city. That is why the city has spent the last four years buying diversification. Since mid 2022 it has signed 43 companies for 11.255 trillion won of investment and about 5,500 new jobs. The two anchors are the Blue Valley National Industrial Complex for battery materials and the hydrogen fuel cell cluster beside it. Both are attempts to keep the metallurgical workforce employed in a decade when the blast furnace will not be hiring.
43 companies, KRW 11.255 trillion and about 5,500 jobs since mid 2022Battery materials and hydrogen: the second industrial base
The pivot is not a slogan. It is a set of plants with addresses, capital commitments and customers. Blue Valley, north of the city, has become the country's battery materials cluster, and the land beside it is being prepared for fuel cell manufacturing. Both depend on the same two things Pohang already has: process engineering at scale, and a port that can land raw material and ship finished product.
The complex has sold about 60 percent of its land and drawn roughly 40 companies committing 2.4 trillion won, with about 2,600 jobs expected at full build. POSCO Future M signed a 1.7 trillion won agreement with Huayou Cobalt, Gyeongsangbuk Province and the city in 2023 for precursor and nickel capacity, and EcoPro committed 2 trillion won over five years from 2023 on a site of about 210,000 pyeong. The city has also designated the site as a secondary battery specialised complex and an opportunity development zone, which brings tax and regulatory treatment that a greenfield site elsewhere does not have.
The fuel cell cluster is the smaller of the two bets and the more speculative. Construction of the core infrastructure started in 2026 with completion targeted for November 2027. Six companies had committed 149.2 billion won of private investment at the last published count, and the city launched an English language investment portal in July 2026. The test centre matters more than the headline: an evaluation hall that can cycle a megawatt scale stack is the kind of shared capital no single supplier can justify alone.
POSTECH, founded in 1986, sits beside the mill and ranks among the country's leading science universities. The Research Institute of Industrial Science and Technology was established by POSCO in 1987 to work on steel, materials and process technology. That combination gives a Korean materials company something a low cost site cannot: a graduate pipeline in metallurgy, ceramics and electrochemistry within a fifteen minute taxi ride.
The Philippine argument is not that this talent should move. It is that the volume stages of the chain, the ones that need land, power, port access and raw material, can sit in the Philippines while the development work stays in Pohang.
The gap: Pohang buys the material the Philippines ships out raw
A cathode plant is a nickel plant with extra steps. Korea has the conversion technology and almost none of the ore. Almost all of the country's precursor and cathode feedstock is imported, and POSCO Future M put its domestic precursor share at about 13 percent in its own 2023 disclosure. The Philippines is the second largest nickel miner on earth and runs two processing plants. That is the whole thesis in two sentences, and it is why the two places are natural partners rather than competitors.
The Philippine Nickel Industry Association reported 37.81 million dry metric tonnes of ore production in 2025, with member companies accounting for about 73 percent of national output. The United States Geological Survey puts contained nickel at about 270,000 tonnes, roughly 10 percent of global mine supply and second only to Indonesia. Reserves are estimated at 4.8 million tonnes of contained nickel.
37.81 Mdt of ore, about 10 percent of global nickel supplyThe ore leaves as laterite. China took about 77 percent of Philippine nickel ore exports in 2024, falling to about 66 percent in 2025 as Indonesia increased its share. Indonesia imported roughly 15 million tonnes of Philippine ore in 2025, valued at about US$742 million, to blend with its own higher silica ore for smelting. The value added in nickel sulphate, mixed hydroxide precipitate or cathode is captured somewhere else.
China 66 percent and Indonesia 24 percent of ore exports in 2025Two high pressure acid leach plants operate in the country: Coral Bay in Palawan at about 20,000 tonnes of nickel a year, and Taganito in Surigao del Norte at about 30,000 tonnes. Neither absorbs all the limonite the mines produce, and there is no large rotary kiln electric furnace cluster for stainless feedstock. The constraint is not willingness. It is power cost, port and tailings infrastructure, permitting time and the absence of a domestic stainless or battery customer to anchor offtake.
Two HPAL plants, about 50,000 tonnes of combined nickel capacityRepublic Act 12253, signed on 5 September 2025, dropped the proposed raw ore export ban and replaced it with a margin based royalty, a windfall profits tax and ring fencing rules, while offering incentives for new processing projects. For a Korean investor the signal is that the Philippines chose to tax the ore and reward the plant, rather than close the door on exports. A processing joint venture with a Philippine mine is the structure that fits that policy.
Figures are from the Philippine Nickel Industry Association release of 1 April 2026, the United States Geological Survey Mineral Commodity Summaries 2026, the OECD nickel traceability report of September 2026 and Philippine customs data as reported in October 2026. Tonnages are not directly comparable across sources because the bases differ.
The other half: a steel market with no integrated mill
Pohang's steel problem is oversupply. The Philippine steel problem is the opposite. The country consumes about 10 million tonnes of steel a year, imports 7 to 7.5 million tonnes of it, and is the only member of ASEAN without an integrated steel mill. There is no blast furnace in the country. Crude steel output was about 1.9 million tonnes in 2024, mostly rebar from induction furnaces and a small number of electric arc furnaces. Flat products, the ones a car body or an appliance skin needs, are almost entirely imported.
Apparent steel consumption sits near 10 million tonnes. Imports ran at 7 to 7.5 million tonnes a year, valued at US$5.20 billion in 2024, up 10.8 percent. Long products, mostly rebar for construction, make up about 78 percent of domestic output and about 80 percent of steel demand sits in construction. Flat products are about 15 percent of output and the segment most exposed to import competition.
US$5.20 billion of steel imports in 2024, up 10.8 percentSteelAsia commissioned a one million tonne rebar mill at Compostela in Cebu on 9 July 2024, taking its group capacity to about 3 million tonnes. That is real capacity, and it is still rebar. The integrated route, the one that turns ore into hot metal and then into flat coil, does not exist. A Korean partner does not need to fund a blast furnace to be useful. Galvanising, colour coating, precision tube, cold rolling, wire drawing and fabrication all sit downstream of imported substrate and all carry better margins than rebar.
About 3 million tonnes of rebar capacity, zero blast furnacesAn integrated mill in the Philippines faces the same cost wall that has blocked every previous attempt: industrial power among the highest in the region, logistics that add cost at every transfer, and a construction market that buys on price. A Korean investor should not read this page as an invitation to build a blast furnace. The realistic entry is a downstream line with a Korean offtake agreement, a Philippine site and a fiscal incentive, and the realistic second step is a scrap fed electric arc furnace once volume justifies it.
Materials and metals
Downstream processing of imported substrate, plus nickel and copper intermediates for the battery chain. The Philippine base is CALABARZON, Clark, Cebu and the Davao Region.
- Anchor page
- Primary metals and heavy steel
Battery and energy storage
Cell assembly, pack integration and materials conversion for a domestic market that imports nearly every cell it uses, with nickel and cobalt feedstock nearby.
- Anchor page
- Battery and storage manufacturing
Industrial workwear
Flame resistant coveralls, high visibility layers, ESD cleanroom apparel and sublimated uniforms for mill, yard and plant floors, produced in Tagum City.
- Production base
- Tagum City, Davao del Norte
What Pohang makes, and where the Philippines fits
The match is not generic outsourcing. Each row below pairs a Pohang capability that already exists with a Philippine base that already has the port, the workforce and the export paperwork to serve it. Read the last column first, because the route decides the business case more often than the labour rate does.
| Pohang capability | Philippine base | What the pairing produces | Route |
|---|---|---|---|
| Flat steel and coated coil | CALABARZON, Clark, Metro Cebu | Galvanised and colour coated sheet, precision tube, cold rolled strip, appliance and automotive blanks | Busan to Manila or Batangas, then road |
| Battery materials and precursors | Surigao, Dinagat, Palawan, Zambales for ore; Clark and CALABARZON for conversion | Mixed hydroxide precipitate, nickel sulphate, precursor and anode feedstock | Ore by bulk carrier to Pohang, material back through Busan |
| Hydrogen and fuel cell stacks | Metro Manila, Clark, Cebu | Balance of plant fabrication, enclosures, cable assemblies, test rigs and installation services | Air cargo through Incheon and Clark |
| Plant engineering and equipment | Metro Manila, Subic, Batangas | Structural fabrication, pipe spools, tanks, conveyor components, spare parts and maintenance crews | Busan to Subic or Batangas, break bulk and container |
| Industrial workwear and PPE | Tagum City and the Davao Region, Metro Manila, Cebu | Flame resistant coveralls, high visibility vests, ESD cleanroom apparel, sublimated uniforms, gloves | Davao to Busan, direct feeder |
| Electronics and precision parts | Clark, CALABARZON, Metro Cebu | Wiring harnesses, sensors, controllers, machined components, power electronics assemblies | Air through Clark, sea through Manila |
Cluster matches rest on published Pohang and Philippine industry data. Capacity, certification and lead time must be verified supplier by supplier. The Philippine Manufacturing FAQ covers minimum orders, labour rules and export documentation.
RB Advertising produces from Tagum City and ships through the Davao International Container Terminal, which gives a Korean buyer a southern loading port rather than a Manila box that must first reach the capital. For a mill, a yard or a plant floor, that is the difference between a four week replenishment and a six week one.
The investment frame, in the order a Pohang board asks
Korean capital is already the largest single source of approved foreign investment in the Philippines. The first quarter of 2026 brought 42.64 billion pesos of approvals, up 52.31 percent, of which Korea accounted for 25.37 billion pesos, or 59.51 percent of the total. Those are approvals rather than cash, and the distinction matters. What follows is the structure behind the number.
The Board of Investments registers export and domestic enterprises outside an economic zone. PEZA registers export manufacturers inside one, and ran 441 zones with more than 4,400 locators at 309.63 billion pesos of approvals from January to October 2026. The Board of Investments approved 900.06 billion pesos across 207 projects and 21,524 jobs from January to September 2026. A manufacturer that expects to export most of its output usually starts with PEZA, then chooses a site.
The Foreign Investments Act, Republic Act 11647, removed the authority to restrict foreign ownership outside the negative list. A manufacturing activity is normally open to 100 percent foreign equity. The act also lowered the paid in capital threshold to US$200,000 for domestic market enterprises, or US$100,000 where advanced technology is involved or the enterprise employs at least 50 direct workers. Land ownership, public utilities, media and certain professions remain restricted, so the activity must be classified in writing before incorporation.
100 percent foreign equity in most manufacturing, US$100,000 threshold with conditionsCREATE MORE, Republic Act 12066, was signed on 8 November 2024 and took effect on 28 November 2024. It sets corporate income tax at 20 percent on taxable income for registered enterprises under the enhanced deductions regime, with a four to seven year income tax holiday, a five percent special corporate income tax on gross income in lieu of national and local taxes for export enterprises, and enhanced deductions for power, labour, training, research and depreciation. High value projects can reach up to 27 years of combined incentives. Export sales are zero rated for VAT.
20 percent corporate income tax, 4 to 7 year holiday, 5 percent special rateThe Philippines Korea free trade agreement entered into force on 31 December 2024 and removed tariffs on 94.8 percent of Philippine exports to Korea, with staging for the balance. In 2025 the two countries traded US$15.1 billion of merchandise, of which Korean exports to the Philippines were US$11.6 billion. A Philippine plant that keeps its production records in order can ship into Busan at zero duty under the agreement, and can still use the ASEAN Korea route or RCEP where the content mix is more complex.
94.8 percent of Philippine export lines duty free into KoreaForeign investment must be registered with the Bangko Sentral ng Pilipinas to guarantee repatriation of capital and remittance of dividends. Once registered, profits and liquidation proceeds can be remitted without prior approval, subject to tax and documentary requirements. A tax treaty between Korea and the Philippines limits withholding on dividends, interest and royalties. The practical constraint is the transfer pricing file, not the regulation.
About 52,695 Koreans live in the Philippines and 1,346,301 Korean visitors arrived in 2025, 20.76 percent of all international arrivals and the largest single source market. Korean banks, logistics firms, construction companies and manufacturers already operate in the country, including Korean contractors on the North South Commuter Railway and the Metro Manila Subway. A Pohang investor would not be arriving first.
Getting from Pohang to a Philippine site
This is the section where a brochure would invent a direct flight. Pohang has none. Pohang Gyeongju Airport runs domestic services only, so every international trip begins with a train or a road leg. The honest routing below is what a site visit actually looks like, and it is the reason the Philippine base should be chosen for its port rather than its proximity to an airport.
KTX from Pohang Station to Seoul Station runs in 2 hours 15 minutes to 2 hours 40 minutes, with about 16 round trips on weekdays and 17 at weekends. The SRT from Suseo takes about 2 hours 22 minutes. From Seoul Station the airport rail link reaches Incheon International in 43 minutes on the express service. A Pohang executive can be at an Incheon departure gate about five hours after leaving the mill.
Gimhae International in Busan is about 100 kilometres away, roughly 1 hour 30 minutes by road, and carries the nonstop services to Manila and Cebu. Daegu International is about 64 kilometres away. Pohang Gyeongju Airport itself connects to Gimpo and Jeju, which is useful for a Seoul meeting and no use at all for a Manila one.
Incheon to Manila runs 3 hours 40 minutes to 4 hours 45 minutes across roughly 74 weekly flights. Incheon to Cebu is about 4 hours 45 minutes across 19 weekly flights, and Clark has a daily service. Korean nationals enter the Philippines visa free for 30 days, and the time difference is one hour, with the Philippines one hour behind Korea.
About 74 weekly Incheon to Manila flights, 3h 40m to 4h 45mPohang's container terminal at Yeongilman handles containers, but Philippine cargo normally relays through Busan, which has the direct weekly strings. Busan to Manila is 3 to 4 days port to port, or up to 18 days on a relay through Singapore, Kaohsiung, Hong Kong or Shanghai. Busan to Cebu is 5 to 12 days and Busan to Davao is 6 to 7 days on a direct feeder. Pohang to Busan is about two hours by road, so a box can be trucked to the load port the same day it leaves the mill.
Busan to Manila 3 to 4 days direct, Davao 6 to 7 daysSchedules and transit times are planning figures drawn from published late 2026 timetables and carrier data. Confirm sailings, frequencies and terminal allocations at booking. The Philippines to South Korea freight page covers documents and customs practice.
Residence for the household that follows the plant
A Korean plant manager rarely moves alone. The household question comes second in the meeting and first in the decision. Korean communities already run in Angeles City and Clark, Metro Manila, Metro Cebu, Metro Davao, Cagayan de Oro and Baguio, with Korean groceries, churches, clinics and English academies. The visa ladder below is the one a family actually climbs, and the monthly lines are what a mid sized household budget looks like outside the capital.
Which route fits which household
The Special Resident Retiree's Visa is the standard route. It opens at age 40, requires a deposit in a Philippine bank, and gives indefinite stay with multiple entry while the deposit remains. The deposit is refundable on cancellation and can be converted into approved investments such as a condominium unit or a long term lease.
An investor who wants residence tied to a business or a financial placement uses the Special Investor's Resident Visa. A Korean spouse of a Filipino citizen uses the 13(a) non quota immigrant visa, which is permanent residence rather than a renewable retiree status. For a working executive, the 9(g) pre arranged employment visa is the normal route and is filed by the Philippine employer.
Where to live follows the plant. A steel or materials operation in CALABARZON puts the household in Laguna or Batangas, within commuting distance of Manila. A Davao Region operation puts it in Davao City, where the cost of living is lower, the air quality is better and the international connections run through Manila or Cebu.
Visa thresholds and household costs
- SRRV, age 40 to 49 with pension US$25,000
- SRRV, age 40 to 49 without pension US$50,000
- SRRV, age 50 and above with pension US$15,000
- SRRV, age 50 and above without pension US$30,000
- SRRV, former Filipino citizen US$1,500
- SIRV, investment visa US$75,000
- Application fee, SRRV US$1,500
- Annual fee, SRRV US$360
- Visa free entry, Korean national 30 days
| Household | Monthly cost | US dollar | Euro | Pound |
|---|---|---|---|---|
| Single executive, serviced unit | ₱45,000.00 | about $716 | about €624 | about £536 |
| Couple, two bedroom lease | ₱75,000.00 | about $1,193 | about €1,041 | about £893 |
| Family of four with school fees | ₱120,000.00 | about $1,909 | about €1,665 | about £1,429 |
Deposits are statutory United States dollar amounts fixed by the Philippine Retirement Authority, so they are not converted here. The peso equivalent moves with the exchange rate. Monthly figures are illustrative and convert at the same rate family used by the site currency switcher, so treat the dollar, euro and pound columns as approximate. Fees, medical requirements and renewal rules change, and should be confirmed before filing.
What Pohang clients ask before they commit
The questions below come from steel traders, materials engineers and plant managers. Each answer is written for a first conversation, not a legal opinion, and each one names the constraint rather than hiding it.
Is there a direct flight from Pohang to the Philippines?
No. Pohang Gyeongju Airport handles domestic services to Gimpo and Jeju only, with no scheduled international route. The practical path is a KTX to Seoul Station in about 2 hours 30 minutes and the airport express to Incheon, or a road transfer of about 1 hour 30 minutes to Gimhae International in Busan, which has the nonstop services to Manila and Cebu. Allow five hours from the mill to an Incheon gate.
How does cargo leave Pohang if there is no direct Philippine liner service?
It relays through Busan. Yeongilman container terminal has four berths of 20,000 deadweight tonnes and about 260,000 TEU of capacity, but the Philippine strings call at Busan New Port. A container is trucked from Pohang to Busan in about two hours and joins a weekly direct sailing, which reaches Manila in 3 to 4 days or Davao in 6 to 7 days. Confirm the cut off before booking the truck.
Does Pohang actually depend on Philippine nickel?
Korean cathode and precursor production depends on imported feedstock, and POSCO Future M put its domestic precursor share at about 13 percent in its own 2023 disclosure. The Philippines supplies roughly 10 percent of global mined nickel and ships most of it to China and Indonesia for processing. The dependency is real on both sides, but it currently routes through third countries rather than directly.
Can a Korean company build an integrated steel mill in the Philippines?
It can, and several groups have announced projects that did not proceed. The Philippines is the only ASEAN member without an integrated mill, imports 7 to 7.5 million tonnes of steel a year, and prices industrial power above most of its neighbours. The bankable entry is downstream: galvanising, colour coating, cold rolling, precision tube and fabrication, fed by imported substrate. A scrap fed electric arc furnace is the realistic second step once volume supports it.
What incentives apply to a metals or battery materials project?
Registration with PEZA for an export enterprise inside a zone, or the Board of Investments for a project outside one, brings the CREATE MORE package: 20 percent corporate income tax, a four to seven year income tax holiday, the five percent special corporate income tax on gross income in lieu of national and local taxes for export enterprises, enhanced deductions for power, labour, training, research and depreciation, and duty free import of capital equipment. High value projects can reach 27 years of combined support.
How much does the Philippines Korea free trade agreement actually save?
It removed tariffs on 94.8 percent of Philippine exports to Korea when it took effect on 31 December 2024, with staging for the balance. The saving depends on the tariff line and on whether the goods meet the rules of origin, which is why the tariff code should be checked before production starts rather than before the vessel sails. ASEAN Korea and RCEP remain available where content is mixed.
Can a Korean company own the land its factory sits on?
Not directly. Land ownership is reserved for Philippine citizens and corporations that meet the 60 percent Filipino ownership test. Foreign investors use a long term lease, typically 50 years renewable for 25, inside an economic zone or under the Investors Lease Act. PEZA and the Board of Investments both allow long leases, and a build to suit arrangement with a Philippine developer is common for a first plant.
What can RB Advertising supply to a Korean industrial buyer?
Industrial workwear and uniform programmes from Tagum City in the Davao Region: flame resistant coveralls, high visibility vests and jackets, ESD cleanroom apparel, sublimated uniforms, polo shirts and outerwear. Production runs from a 12 piece minimum on standard styles, with Korean size charts, Korean language labels and carton marking. The manufacturing workwear page carries fabric and certification detail.
Talk with RB Advertising
For Pohang manufacturers, materials suppliers, plant engineers and households planning a move, our commercial team handles production enquiries, sample requests, freight planning and site visits in the Davao Region. Office hours: Mon to Sat, 8:30 AM to 5:00 PM (PHT). Address: Naungayan Building, Aala Road, Barangay Mankilam, Tagum City, Davao del Norte, Philippines.
Related Philippine and Korean corridors
The pages below carry the detail behind each row: the steel balance, the battery supply chain, the incentive statutes, the freight documents and the Korean city gateways.
