코트 Wool and cashmere overcoats

Wool & Cashmere Overcoats (코트) from the Philippines

A winter coat is the hardest garment in a tailoring programme. The cloth is heavy, the canvas has to hold a shoulder for a decade, and the customer wears it every day from November to March. This page sets out how RB Advertising builds wool and cashmere overcoats in Tagum City for Korean buyers, and why a Korean brand or a Korean manufacturer should look at the Philippines for its next plant.

  • Cut and sewn in Mankilam, Tagum City
  • English and Korean briefs accepted
  • Sampling from a technical pack
14 to 19 micron Cashmere fibre band we source and verify
600 to 750 gsm Cloth weight for a Seoul or Gangwon winter
4 to 7 years Income tax holiday under CREATE MORE
1 hour Time difference between Manila and Seoul
01 / The brief

What a Korean buyer means when they say 코트

코트 is the general Korean word for a coat, and a sourcing brief that uses it can mean three very different garments. The fibre, the weight and the hand of the cloth decide the factory line, the price and the season the coat can sell in. We quote and sample against the fibre first, then the construction.

Volume tier

Wool overcoat

울 코트 · melton, flannel or worsted coating
20 to 24 micron 500 to 900 gsm Dry clean

The workhorse of the Korean winter wardrobe. Dense melton holds a clean silhouette, resists wind and takes a pressed edge without shine. It is the easiest cloth to cut at volume and the easiest to repair, which matters for a brand that sells through department stores and outlet channels.

Best for: commuter coats, school and campus programmes, uniform contracts, entry to mid price retail.
Top tier

Cashmere overcoat

캐시미어 코트 · dehaired down fibre
14 to 16.5 micron 350 to 520 gsm CCMI traceable

Pure cashmere is warm at a lower weight, which is why a Seoul tailor can sell a 420 gsm coat for the same winter that needs 650 gsm in wool. The fibre is short, so pilling and seam abrasion are the real quality risks, not warmth. We specify a longer staple and a tighter twist to hold the surface.

Best for: luxury labels, made to measure houses, limited capsule drops, export to Japan and the Gulf.
02 / Construction

The anatomy that keeps a coat on the shoulder after five winters

Most coats fail at the chest and the shoulder, not at the cloth. A fused front saves cost and loses shape after a few cleanings. A canvas front floats between the shell and the lining and slowly takes the shape of the wearer. The table below is the construction language we use with a Korean technical team, with the Korean term beside each part.

Three construction tiers

Full canvas. A horsehair and wool canvas runs the whole front, hand padded at the lapel and chest. The most expensive tier, the longest life, the best drape. It is the correct choice above a certain retail price.

Half canvas. Canvas through the chest and lapel, fused below the chest. The commercial sweet spot for a department store brand. Most of the shape benefit at a workable cost.

Fused. A resin bonded interlining through the front. Fast, light and cheap. Only suitable for a short life fashion coat, and it must be pressed on a vacuum table to avoid bubbles after cleaning.

  • Chest canvas심지
    Horsehair and wool canvas, hand padded at the lapel roll. Full canvas for premium, half canvas for volume retail, fused only for short life fashion.
  • Shoulder어깨
    Roped or natural shoulder, sleeve head roll set by hand. Korean fit blocks usually ask for a clean natural line with a slight extension, not a built up Neapolitan shoulder.
  • Front interlining앞심
    Wool melton or hair canvas behind the shell. It carries the button stance and stops the front from collapsing when the coat is open.
  • Lining안감
    Cupro or Bemberg for a cool hand and low friction, viscose as the volume option, tencel for a plant based story. Lining is cut with a centre back pleat for movement.
  • Collar칼라
    Melton undercollar, hand padded, rolled rather than pressed flat. The collar is what a buyer touches first in a showroom.
  • Buttons단추
    Horn, corozo or urea. Horn and corozo for premium, urea for uniform programmes that need a consistent shade and a lower replacement cost.
  • Pockets포켓
    Welt, flap, ticket and interior security pocket. Pocket mouths are taped and bar tacked because a coat pocket carries a phone, gloves and a wallet every day.
  • Seams봉제
    10 to 12 stitches per inch on the shell, back stitched at stress points. Shoulder and armhole seams are taped to stop creep under the weight of the cloth.
  • Pressing프레스
    Vacuum table, steam and a rest period before packing. Wool coating needs to cool and dry in shape, otherwise the coat arrives in the carton with a memory of the fold.
03 / Fibre

Where the wool and the cashmere come from

The Philippines does not grow wool or cashmere. It imports the fibre and the cloth, then adds the part that is harder to move: pattern engineering, cutting, tailoring, pressing and quality control. The fibre map below is the sourcing route we use, with the certification that has to travel with the bale.

Fibre and cloth routes for a Philippine tailoring programme
SourceFibre or clothSpecificationPaperwork
AustraliaMerino wool top and worsted yarn18.5 to 21.5 micron, 60 to 70 mm staple, IWTO measuredIWTO certificate, RWS or mulesing free declaration
Inner Mongolia and MongoliaDehaired cashmere14 to 16.5 micron, 34 to 38 mm staple, low guard hairCCMI registration, fibre origin declaration
Biella, ItalyWool coating, cashmere blends, double face450 to 750 gsm, stock service and custom colourMill composition certificate, Oeko Tex Standard 100
Daegu, South KoreaLinings, pocketing, blend yarnsCupro and viscose lining, 90 to 130 gsmMill certificate, Korean label copy support
China, Jiangsu and ZhejiangWool melton, blend coating, volume cloth500 to 900 gsm, piece dyed and yarn dyedOeko Tex Standard 100, AZO and formaldehyde test
PhilippinesAbaca and piña signature blendsBlended with wool for a tropical or resort linePTRI fibre reference, GOTS where cotton is used

Cloth is ordered to the style, not to stock. A mill roll sets the practical minimum, which is why the MOQ on a coat is confirmed after the cloth reference, not before it.

04 / Climate fit

A coat weighted for the city it will be worn in

Seoul and Busan are not the same winter. A 750 gsm melton that feels right in Chuncheon is unwearable on a Busan commuter train in January. Korean buyers usually run two or three weight bands in one season, and the fit block changes with the layer underneath. The bands below are the ones we plan with.

Suggested cloth weight by Korean market
MarketTypical January rangeCloth weightConstruction note
Seoul and GyeonggiAbout minus 15 to 4 Celsius, dry cold and wind600 to 700 gsmFull or half canvas, knitted storm cuff, deep armhole for a suit jacket underneath
Gangwon, Chuncheon and the mountainsAbout minus 20 to 2 Celsius, long cold nights650 to 750 gsm meltonFull canvas, melton undercollar, longer body, optional quilted body lining
Daegu and North GyeongsangAbout minus 12 to 6 Celsius, inland basin cold550 to 650 gsmHalf canvas, clean shoulder, room for a mid layer
Busan, Ulsan and the south coastAbout minus 8 to 8 Celsius, damp wind off the sea450 to 550 gsmWind resistant weave, cupro lining, shorter length for transit use
JejuAbout minus 2 to 10 Celsius, wet and windy380 to 450 gsmUnlined or half lined, water repellent finish, packable for travel retail

Climate bands are planning guides drawn from published Korean winter normals. The final weight is confirmed on a wear trial with the buyer's own layering system.

Korean size curves

Korean ready to wear labels use men's 90 to 110 and women's 44 to 77, and the numbers are not consistent across brands. We do not cut to the label. We cut to a measured body spec in centimetres and record chest, waist, hip, shoulder, sleeve and back length for every size, then map the buyer's own grade rules onto that sheet.

Tall and short grade sets are available without a new pattern block, which matters for a brand selling in both Seoul and a regional market.

Layering, not just weight

A Seoul commuter wears a shirt, a knit and a coat. That combination needs 4 to 6 cm of chest ease over the body measurement, and a deeper armhole than a Western fit block. A coat cut too close reads well on a hanger and fails at the shoulder in wear.

  • Armhole depth and sleeve pitch set for a knit layer.
  • Collar stand height checked against a scarf.
  • Pocket placement checked with a gloved hand.
  • Hem length checked for a seated commute.
05 / Route to market

From a technical pack in Seoul to a carton in Busan

A tailored coat moves through five gates: specification, sample, fabric booking, bulk sewing and final inspection. The sequence below is the one we run for an export programme, with the working days we plan against. Freight is booked after inspection, not before, because a coat cannot be rushed through the press.

1 Specification 3 to 5 days Technical pack, measurement sheet, cloth reference and target cost reviewed together. Gaps are closed before a sample is cut.
2 Sample 10 to 15 days One fit sample in the nominated cloth, photographed on a form and measured against the sheet. Buyer comments return in one round.
3 Cloth booking 10 to 25 days Mill roll reserved against the confirmed style. Stock service is faster, custom colour needs a dye lot and a lab dip.
4 Bulk sewing 45 to 70 days Cut, canvas, sew, press and rest. Tailoring runs on a separate line from jersey and uniform production so the press queue is not shared.
5 Inspection and ship 5 to 8 days AQL inspection, needle detection, carton audit and booking. Documents follow the preference route claimed at import.

Indicative transit to Korea

LaneSea transit
Davao to BusanAbout 7 to 10 days
Davao to IncheonAbout 9 to 12 days
Manila to BusanAbout 5 to 8 days
Manila to IncheonAbout 6 to 9 days
Air, Manila to IncheonAbout 4 hours in the air, 1 to 3 days door to door

Port to port planning ranges. Sailing schedules, feeder legs and Korean clearance add time and are confirmed on booking.

Documents that travel with the coat

  • Commercial invoice, packing list and bill of lading.
  • Proof of origin for the route claimed: Philippines Korea FTA declaration or certificate, ASEAN Korea Form AK, or an RCEP proof of origin.
  • Fibre composition and care label copy in Korean, supplied by the buyer or prepared with the mill.
  • Test report for pilling, colour fastness and fibre content.
  • AQL inspection report and needle detection record.
06 / Investment case

Why a Korean coat brand should look at a Philippine plant

Korea has the design talent, the retail channels and the fibre trading relationships. What it does not have is a low cost tailoring labour base at scale. The Philippines offers an English speaking workforce, a one hour time difference from Seoul, preferential access back into Korea, and an incentive regime that was rewritten for export manufacturing in 2024.

CREATE MORE, RA 12066

Registered enterprises pay 20 percent corporate income tax instead of 25 percent, with an income tax holiday of 4 to 7 years for export and strategic activities, plus enhanced deductions for labour, training, research and power.

PEZA ecozones

An export enterprise inside a PEZA zone can take the income tax holiday followed by the 5 percent special corporate income tax on gross income, or the enhanced deduction route, with duty free import of capital equipment and raw material.

100 percent foreign equity

The Foreign Investments Act, as amended by RA 11647, allows full foreign ownership in most sectors. A Korean brand can own its Philippine garment plant outright, without a local partner holding a controlling stake.

Land lease, RA 7652

The Investors' Lease Act allows a 50 year lease on private land for an industrial site, renewable for another 25 years. That is long enough to amortise a cutting room, a press line and a warehouse.

Philippines Korea FTA

The bilateral free trade agreement has been in force since 31 December 2024 and removes tariffs on the large majority of tariff lines. RCEP and the ASEAN Korea Free Trade Area remain available as parallel origin routes.

Tatak Pinoy, RA 11981

The Tatak Pinoy Act gives locally manufactured goods a preference in public procurement and a national quality and productivity programme. A Philippine made coat can compete for institutional and government supply on more than price.

Why Mindanao, and why Tagum City

Our plant sits in Mankilam, Tagum City, in Davao del Norte, with a second office in Cagayan de Oro. That position is not accidental. It puts a tailoring line within reach of three container gateways, a technical training pipeline in the Davao Region, and a labour market that has not been bid up by the electronics and BPO sectors in the way Metro Manila has.

  • Ports. Sasa in Davao City, the Mindanao Container Terminal in Misamis Oriental, and Manila for direct Korea sailings.
  • Air. Davao International Airport and Laguindingan, with a short hop to Manila for Incheon connections.
  • Skills. Garment technology and dressmaking courses under TESDA, plus in house training on our own line.
  • Cost base. Region XI wage orders are set locally and remain below the Metro Manila and Korean manufacturing benchmarks.
  • Language. English is the working language of the plant floor, which shortens technical reviews with a Korean team.

The fibre can land in Mindanao, the coat can be cut and pressed there, and the finished garment can enter Korea under preference. The only thing that has to travel is the specification. RB Advertising, Tagum City

07 / Quality

The gates a coat has to pass before it is packed

Wool and cashmere hide defects well in a showroom and reveal them in wear. A coat that pills at the cuff or slips at the seam is a return, not a repair. Every programme runs the same gate list, and the report travels with the carton.

  • Measurement. Plus or minus 0.5 cm on critical dimensions, plus or minus 1 cm on non critical points.
  • AQL sampling. ISO 2859-1, 2.5 major and 4.0 minor, on every lot before booking.
  • Pilling. Martindale 4 at 2,000 rubs for wool, 3 to 4 for a high cashmere share.
  • Colour fastness. Grade 4 or above to light, rubbing and dry cleaning on the shell and the lining.
  • Shrinkage. Within 2 percent in length after the agreed care cycle. Wool coating is dry clean only.
  • Seam strength. Seam slippage tested to ISO 13936, with bar tacks at pocket mouths and vents.
  • Fibre content. Composition verified by microscopy against the mill certificate before bulk.
  • Metal detection. Every piece passes a needle detector, and the record is filed with the lot.

Certification we work to

System certification is not a substitute for a garment test, but it tells a buyer how the plant is run. Our programmes are built around the following standards, and the buyer's own protocol takes priority where the two differ.

  • ISO 9001 quality management.
  • SA8000 and social compliance audit for labour practice.
  • Oeko Tex Standard 100 for harmful substance limits.
  • RWS for responsible wool, and CCMI for cashmere traceability.
  • GOTS and GRS where organic cotton or recycled fibre enters the style.
  • ZDHC aligned chemistry for wet processing partners.
08 / Buyer questions

What Korean buyers ask before they place a coat programme

These are the questions that come up in a first technical call, answered the way we answer them in the room. If your question is not here, send it with the specification and we will answer it in writing.

What does 코트 mean in a sourcing brief?

It is the general Korean word for a coat, covering wool overcoats, cashmere coats and blends. In practice a brief will name the fibre and the season, for example a wool cashmere winter coat for a Seoul department store floor. We confirm fibre, weight and construction before quoting, because the same word covers garments that cost three times apart.

Which cloth weight suits Seoul, Busan and Gangwon?

Plan 600 to 700 gsm for Seoul and Gyeonggi, 650 to 750 gsm melton for Gangwon and the mountain counties, 550 to 650 gsm for Daegu and the inland basin, 450 to 550 gsm for Busan and the south coast, and 380 to 450 gsm for Jeju. The wear trial with the buyer's layering system settles the final weight.

Can you build a full canvas overcoat, or only fused?

We build all three tiers: full canvas, half canvas and fused. Full canvas uses a horsehair and wool canvas through the front, hand padded at the lapel and chest. Half canvas is the usual commercial choice for a department store brand. Fused is offered only for a short life fashion coat, and we will say so when the brief points that way.

How do you verify a cashmere percentage?

The mill certificate is checked against a microscopy test on the greige and the finished shell, and the dehaired fibre is checked for guard hair content before yarn spinning. For a traceable programme we work with CCMI registered supply and keep the registration in the file. We do not accept a cashmere claim from a trading desk without a fibre test.

What is the minimum order for wool and cashmere overcoats?

MOQ follows the cloth, not the style. Coating cloth is ordered in mill rolls, so the practical minimum is one roll per colour and the number of coats it yields depends on the width and the marker. Send the cloth reference or the mill article number and we will return the threshold with the quotation. There is no published unit price because a 450 gsm wool and a 700 gsm cashmere blend do not share a cost basis.

How long does sampling and bulk production take?

Sampling runs 10 to 15 working days after the technical pack is complete. Bulk runs 45 to 70 working days after the cloth lands, depending on canvas tier, lining and the number of colourways. Freight to Busan is about 7 to 10 days from Davao, and to Incheon about 9 to 12 days, so a full cycle from approved sample to Korean warehouse is usually three to four months.

Do you work with Korean size curves and grade rules?

Yes. We accept a Korean size chart and convert it into a measured body spec in centimetres, then build the pattern block and grade rules from that sheet. Men's 90 to 110 and women's 44 to 77 are the usual label ranges, but labels vary between brands, so the measurement sheet is the controlling document.

How does the Philippines Korea FTA change the landed cost?

The agreement has been in force since 31 December 2024 and removes tariffs on the large majority of tariff lines, including apparel headings under HS 6201 and 6202. To claim preference the goods must meet the rules of origin and travel with the correct proof. RCEP and the ASEAN Korea Free Trade Area remain available, so a programme with Korean or Chinese inputs can choose the route that fits its bill of materials.

Can a Korean company own 100 percent of a Philippine garment plant?

In most cases yes. The Foreign Investments Act, as amended by RA 11647, allows full foreign equity in most sectors, and a garment plant inside a PEZA ecozone is an export enterprise rather than a domestic retail operation. The Foreign Investment Negative List still restricts a small number of activities, so the corporate structure is confirmed with counsel before registration.

Which incentives apply to a coat factory?

The main instruments are CREATE MORE (RA 12066) for the 20 percent corporate income tax rate, the income tax holiday and enhanced deductions, PEZA registration for ecozone export enterprises, the Investors' Lease Act for a long land lease, and the Tatak Pinoy Act for locally manufactured goods in public procurement. Eligibility depends on the activity and the location, so the incentive package is confirmed with the Board of Investments or PEZA before commitments are made.

How do you ship from Mindanao to Korea?

Full container and less than container loads move through Sasa in Davao City or the Mindanao Container Terminal in Misamis Oriental, with a feeder leg to Manila where the direct Korea sailing is faster. Air freight runs through Davao International Airport and Manila to Incheon for samples and replenishment. We book after inspection and supply the invoice, packing list, bill of lading and the origin proof that matches the preference route.

Send the coat specification

Send the technical pack, the cloth reference and the Korean size chart. If the brief is still a sketch, send the season, the retail price band and the city the coat will sell in, and we will propose the fibre, the weight and the construction. We answer in English and can prepare documentation for a Korean buyer or a Philippine locator.

Main office and plant Mankilam Main Office, Naungayan Building, Aala Road, Barangay Mankilam, Tagum City, Davao del Norte 8100, Philippines.
Northern Mindanao office Ficcoville, Iponan, Cagayan de Oro City, Misamis Oriental 9000, Philippines. Freight coordination to Manila, Subic, Batangas and the Cebu ecozones.

Sources and scope

Korean winter temperature bands follow published Korea Meteorological Administration normals for Seoul, Chuncheon, Daegu, Busan and Jeju. Fibre specifications follow International Wool Textile Organisation measurement practice and Cashmere and Camel Hair Manufacturers Institute registration for cashmere. Philippine incentive terms follow Republic Act 12066 (CREATE MORE), Republic Act 11647 (Foreign Investments Act amendment), Republic Act 7652 (Investors' Lease Act), Republic Act 7916 (Special Economic Zone Act) and Republic Act 11981 (Tatak Pinoy Act). Tariff treatment follows the Philippines Korea Free Trade Agreement, in force 31 December 2024, with RCEP and the ASEAN Korea Free Trade Area as parallel routes.

This page is an orientation dossier for Korean buyers, Philippine manufacturers and investors. Transit times, incentive terms, tariff schedules and eligibility change, and each programme is confirmed on the file before a commitment is made. Confirm current terms with the Philippine Board of Investments, PEZA, the Bureau of Customs or a licensed adviser before committing capital.