Gimhae, Gyeongsangnam Province, South Korea

Gimhae: the iron city of Gaya, now a parts city, and the Philippine base that serves it

Gimhae means sea of iron. It was the capital of Geumgwan Gaya, a confederacy that smelted and traded iron across East Asia for six centuries, and it has never really stopped: about 45 percent of the city's output is still manufacturing, spread across more than a thousand automotive parts firms, machine shops, ship component makers and aerospace suppliers. The city now has 533,276 residents, the youngest average age in the province, and the largest foreign resident population in Gyeongsangnam. This page reads that base against the Philippine case, where the labour heavy stages of the same chains can be built, staffed and shipped back into Busan at zero duty under the bilateral free trade agreement.

Jinyeong Gimhae city Airport Busan New Port Nakdong plain Nakdong estuary
533,276 Residents in October 2026, second largest in Gyeongsangnam and 564,787 when foreign residents are counted.
45.3 percent Share of gross regional product that comes from manufacturing, the figure the city publishes for its own industrial identity.
0 percent Tariff on qualifying Philippine manufactured goods entering Korea since the bilateral agreement took effect on 31 December 2024.

Gimhae, weighed on the city's own scales

Most Korean industrial cities can be explained by a river, a rail line or a single chaebol plant. Gimhae needs three sentences rather than one. It is the old capital of a confederacy that traded iron, it is the western half of the Busan conurbation, and it is a dense small and medium manufacturer base that supplies the shipyards, the car plants and the aircraft programmes of the southeast. The figures below come from the city and from the Ministry of the Interior and Safety, and they are the ones a supplier would put in its own board paper.

Population
533,276Resident registration in October 2026. The city peaked at about 543,000 in 2020 and has eased since, but it grew again in each of the last two years, and it is still the second largest local government in the province after Changwon.
Land area
463.45 square kilometresRoughly the footprint of Andorra, arranged as one town, six rural townships and twelve urban districts. The built up half sits in the Nakdong delta, the northern half runs up into the mountains at Mucheoksan.
Age profile
44.1 years averageThe youngest average age of the eighteen cities and counties in Gyeongsangnam, and 1.7 years below the national figure. Residents in their twenties and thirties are 22.0 percent of the total, second highest in the province.
Foreign residents
32,548 in 2024The largest foreign resident population in the province and one of the largest in the country outside the capital region. That matters to a manufacturer: the labour market here already includes people who have worked in a Korean factory and know what a shift is.
Industrial base
More than 7,000 small and medium firmsMachinery, metal, automotive parts, ship components, electronics and food, spread across general industrial complexes at Jillye, Hallym, Juchon, Daedong and Buwon, plus the newer Techno Valley.
Heritage
UNESCO listed in 2023The Daeseong-dong Tumuli are one of seven cemeteries in the serial Gaya Tumuli property, inscribed on criterion three. The Royal Tomb of King Suro has been a state designated historic site since 21 January 1963.
Position
West of BusanGimhae shares a boundary with Busan's Gangseo District, which is where the airport and the new port actually sit. A Gimhae factory is inside the Busan industrial conurbation without paying Busan land prices.
Travel time
One hour behind ManilaKorea runs one hour ahead of the Philippines, with no daylight saving on either side. A nine in the morning call in Gimhae is eight in the morning in Manila and Tagum City.

Sources: Ministry of the Interior and Safety resident registration, October 2026, and the 2024 foreign resident survey; Gimhae City industrial policy releases; UNESCO World Heritage List entry 1666; Gimhae City cultural heritage register. Population is registration based, which runs about 3.5 percent above the census in Korea.

A city that was named after iron, and kept the trade

The name is not decoration. Gimhae is written with the characters for gold and sea, and the iron trade is the reason the place mattered before it had a factory. Geumgwan Gaya sat on the Nakdong delta with a navigable river behind it and open sea in front, and it turned that geography into the iron economy of the southern peninsula. Six centuries later the same town is casting brackets, housings and shafts for the same customers in Busan and Ulsan that its ancestors supplied with ingots.

1st century BCE Iron worked on the delta Smelting and forging begin in the Nakdong basin, and iron becomes the item the region trades for.
42 CE Geumgwan Gaya founded King Suro establishes the polity at Gimhae. Iron armour, horse fittings and iron pieces used as currency fill the tombs.
5th century Iron exported across East Asia Gaya iron reaches Lelang, the Chinese commanderies, the Japanese archipelago and the other Korean polities by land and sea.
1976 The airport opens Gimhae International opens on the estuary, one runway on a shared air base, and the city gains a gate to the south.
2024 Four clusters funded The city sets out logistics and robotics, future vehicles, hydrogen and biomedical clusters to be built out to 2033.

The tombs are the record. Daeseong-dong, east of the royal tomb, has produced about 170 graves across nine excavation campaigns, dated from the first to the fifth century, and the grave goods include vertical plate armour, iron helmets, iron swords and quantities of iron pieces small enough to have circulated as money. More than half of the armour excavated from Three Kingdoms period sites in Korea comes from Gaya, and the finest of it is in the Gimhae National Museum.

The royal tomb itself is a round mound six metres high and twenty two metres across, with the stone platform, the civil and military officer statues and the horse and sheep figures that Korean royal tombs carry. King Suro's queen, Heo, has her own smaller tomb nearby, and the Pasa stone pagoda beside it is built from stone the chronicles say came by ship from a state called Ayuta, usually identified with India. Whether or not that is literally true, it is the right story for a port city: the local identity was always built on what arrived by water.

That history has an industrial consequence that a visiting buyer can use. Gimhae is not a town that discovered manufacturing in the 1970s. It is a town where metalwork is the inherited trade, where the technical high schools and the university still teach it, and where a plant manager can assume a supplier two streets away understands tolerance, heat treatment and surface finish without a long explanation.

For a Philippine reader the point is different but related. The case for placing labour heavy work in the Philippines is not that Philippine workers are cheap in the abstract. It is that a Gimhae customer already knows how to specify metalwork precisely, which is exactly the input a new production site needs and the thing most offshore projects get wrong.

From molten metal to a robot cell: what the city actually makes

The city's own industrial plan calls the manufacturing share of output 45.3 percent and describes Gimhae as one of the three largest concentrations of manufacturing firms in the country. That is a large claim, and it holds up when you look at what the parks contain: not one anchor plant but thousands of tier two and tier three suppliers, each with a customer in Busan, Ulsan, Changwon or Seoul. The staircase below is the value chain as it sits on the ground, from the most basic cast part to the newest cluster the city is funding.

Cast 01
Iron, steel and non ferrous metal work

Foundries, forges, press shops, cutting and surface treatment. This is the oldest layer and the one that followed the shipyards into the delta. Aluminium and stainless work for marine fittings sits alongside it.

Jillye, Hallym, Juchon
Cast 02
Machine parts and precision machining

Pumps, valves, bearings, moulds and dies, hydraulic parts, conveyor and packaging machinery, food processing equipment. The Techno Valley complex at Jillye was planned around this layer.

More than 1,000 firms in the auto chain alone
Cast 03
Automotive components

Solenoid valves, body frames, gearbox shafts, springs, weather strip, brake parts and EV drivetrain pieces, sold to the assembly plants at Ulsan and the tier one suppliers around Changwon and Busan.

Vehicle and parts is the largest single cluster
Cast 04
Ship and aerospace components

Hull sections, marine engine parts, deck fittings and aircraft machined parts, including precision aviation work inside the Juchon and Hallym parks. The airport base and the MRO cluster at Busan support it.

Serves Busan, Ulsan and Sacheon programmes
Cast 05
Robotics, sensors, hydrogen and biomedical

The four clusters the city is funding to 2033: logistics and sensor robotics at Jillye, future vehicle engineering at Hallym, a liquid hydrogen test bed at Sincheon, and a biomedical and digital health platform at the west Gimhae complex.

Supported by national and provincial grants

Cluster detail comes from the city's January 2024 industrial policy release and its subsequent funding announcements, including the smart sensing unit test centre, the robot refurbishment centre, the power semiconductor certification centre due in the first half of 2026, and the liquid hydrogen compressor test bed. Named programmes are public projects, not customer contracts.

What the city has, and what it no longer has enough of

A Gimhae supplier does not need convincing that Korea is expensive. It needs a number it can put in front of a board. The honest framing is a balance sheet: on one side a deep technical base, on the other a labour pool that is not growing and a cost structure that rises every year. The Philippine case only works where the second column bites, and it is worth saying plainly where it does not.

What Gimhae has

  • A working metal and machine cluster with decades of process knowledge, not a greenfield site.
  • Engineering and technical education on the doorstep, including Inje University's Gimhae campus at Inje ro 197 and a ring of technical high schools.
  • Three ports inside a working day, an airport on the boundary, and a rail freight line that runs from Jillye straight to Busan New Port.
  • Customers who can write a specification, approve a first article and audit a process.
  • The largest foreign resident community in the province, already used to industrial shift work.

What it no longer has

  • A growing pool of young entry level labour. The city is the youngest in the province and still not adding enough workers for the plants it wants.
  • A wage and land cost that lets a tier three supplier compete on price with a Chinese or Southeast Asian moulder.
  • Room for the volume work the new clusters will push down onto their suppliers.
  • Time. A robot cell or a hydrogen test bed does not need twenty people on a line, and the supplier underneath it still does.

The limit is equally important. A Philippine plant cannot replace a Gimhae foundry, a cleanroom line or a certified aviation machining cell, and a page that promised it could would be wasting the reader's time. What it can do is take the assembly, subassembly, kitting, inspection, labelling, packing and uniform programmes that sit around those plants, and run them at a cost that keeps the Korean customer in the game against cheaper module makers. That is a smaller claim than most offshore brochures make, and it is the one that survives a site visit.

Population and age data from the Ministry of the Interior and Safety, October 2026. Wage comparisons in the next section use published Philippine regional wage orders and Korean minimum wage data, and are planning bands rather than offers.

What Gimhae buys, and where the Philippine base fits

Each row pairs a demand that exists in the Gimhae industrial belt with a Philippine base that already has the port, the workforce and the export paperwork to serve it. Read the route column before the wage column, because freight decides more of these decisions than labour cost does. A four day sailing is a business. A three week relay is a rounding error in the wrong direction.

Gimhae demand to Philippine base, with the lane that joins them
Gimhae demandPhilippine baseWhat the pairing producesRoute
Auto parts and subassembliesLaguna, Cavite, Batangas, CebuHarnesses, plastic injection, rubber seals, stampings, machined brackets, welded framesBusan to Manila, 3 to 4 days port to port
Ship components and marine fittingsMetro Cebu, Batangas, SubicDeck fittings, pipe spools, cable trays, outfitting parts, marine grade coatings and coversBusan to Cebu, 5 to 12 days
Aerospace machined partsClark, Laguna, Metro CebuBrackets, bushings, fixtures, tooling and inspection support under a Korean approved processBusan to Clark or Manila, air for urgent lots
Robotics and sensor housingsLaguna, Cavite, Metro ManilaSheet metal enclosures, cable assemblies, PCB subassembly, sensor mounts and packagingBusan to Manila, air for prototypes
Plant workwear and cleanroomTagum City, Davao RegionESD garments, frocks, hoods, boots, high visibility vests, flame resistant coveralls, plant uniformsDavao to Busan, direct feeder, 6 to 7 days
Tropical inputs for food plantsMindanao, CALABARZONCoconut, banana, pineapple, mango, cocoa, coffee, seaweed and purees, plus printed packagingDavao or Manila to Busan, reefer and dry

Cluster matches rest on published Philippine industry data and the composition of the Gimhae industrial base. Capacity, certification and lead time must be verified supplier by supplier. The Philippine Manufacturing FAQ covers minimum orders, labour rules and export documents.

The investment frame, in the order a Gimhae board asks

Korean capital is already the largest single source of approved foreign investment in the Philippines. The first quarter of 2026 brought 42.64 billion pesos of approvals, up 52.31 percent on the same quarter a year earlier, and Korea accounted for 25.37 billion pesos of that, or 59.51 percent. Those are approvals, not cash in the ground. Below is the structure behind the number, in the sequence a Korean board actually asks the questions.

Clause 01

Who approves the project

The Board of Investments registers export and domestic enterprises outside an economic zone. PEZA registers export manufacturers inside one, and ran 441 zones with more than 4,400 locators at 309.63 billion pesos of approvals from January to October 2026. The Board of Investments approved 900.06 billion pesos across 207 projects and 21,524 jobs from January to September 2026. A manufacturer that expects to export most of its output usually starts with PEZA, then chooses a site.

Clause 02

What a Korean company can own

The Foreign Investments Act, Republic Act 11647, removed the authority to restrict foreign ownership outside the negative list. A manufacturing activity is normally open to 100 percent foreign equity. The paid in capital threshold is US$200,000 for a domestic market enterprise, or US$100,000 where advanced technology is involved or at least 50 direct workers are employed. Land, public utilities, media and certain professions remain restricted, so a long term lease inside a zone is the normal structure.

Full foreign equity in most manufacturing
Clause 03

What the plant pays

CREATE MORE, Republic Act 12066, took effect on 28 November 2024. It sets corporate income tax at 20 percent on taxable income for registered enterprises under the enhanced deductions regime, with a four to seven year income tax holiday, a five percent special corporate income tax on gross income in lieu of national and local taxes for export enterprises, and enhanced deductions for power, labour, training, research and depreciation. Export sales are zero rated for VAT and capital equipment enters duty free.

20 percent income tax, 4 to 7 year holiday
Clause 04

What crosses the border

The Philippines Korea free trade agreement entered into force on 31 December 2024 and removed tariffs on 94.8 percent of Philippine exports to Korea, with staging for the balance. In 2025 the two countries traded US$15.1 billion of merchandise, of which Korean exports to the Philippines were US$11.6 billion. A Philippine plant that keeps its production records in order can ship into Busan at zero duty under the agreement, and ASEAN Korea and RCEP remain available where content is mixed.

94.8 percent of Philippine export lines duty free
Clause 05

How the money comes home

Foreign investment must be registered with the Bangko Sentral ng Pilipinas to guarantee repatriation of capital and remittance of dividends. Once registered, profits and liquidation proceeds can be remitted without prior approval, subject to tax and documentary requirements. A tax treaty between Korea and the Philippines limits withholding on dividends, interest and royalties. The practical constraint is the transfer pricing file, not the regulation.

Clause 06

Who is already there

About 52,695 Koreans live in the Philippines and 1,346,301 Korean visitors arrived in 2025, 20.76 percent of all international arrivals and the largest single source market. Korean banks, logistics firms, construction companies and manufacturers already operate in the country. A Gimhae supplier would not be arriving first, and that matters for everything from recruitment to freight consolidation to finding a Korean speaking accountant.

Statutory figures and agency counts are drawn from the Philippine Board of Investments, PEZA, the Bangko Sentral ng Pilipinas and the Department of Trade and Industry, checked in November 2026. Registration decisions are legal and tax questions and belong with Philippine counsel and a licensed customs broker.

The route south, honestly drawn

Gimhae is the rare Korean industrial city with an international airport on its boundary, which is why this page does not have to invent a connecting flight. The airport sits in Busan's Gangseo District rather than inside Gimhae, a detail worth knowing because the postcode and the taxi fare both say Busan. The rail and sea legs below are the ones a site visit or a container actually uses.

Air

Gimhae International carries nonstop Philippine services to Manila on Philippine Airlines, to Cebu on Air Busan, Jeju Air and Jin Air, to Clark on Jin Air and to Bohol Panglao on Jeju Air. Jeju Air adds a five times weekly Manila service from 17 December 2026, leaving at 21:30 and landing at Ninoy Aquino at 00:45 the next day, with the return at 01:45 arriving back at 07:20. Flight time is about four hours to Manila and about four hours fifteen to Cebu.

Manila 2,431 km, Cebu 2,811 km, Clark 2,375 km, Bohol 2,895 km
Light rail

The Busan Gimhae Light Rail Transit runs 23.9 kilometres across 21 stations from Sasang in Busan to Kaya University in Gimhae, fully automated, opened in September 2011. The airport station is three stops and 3.7 kilometres from Sasang, and the Gimhae stations are on the same line, so a visitor can land, ride without a car and be in the city centre. Sasang connects to Busan Metro Line 2, Daejeo to Line 3.

Airport to Sasang in about six minutes, no car required
Rail

The Gyeongjeon line crosses the city with stations at Hallimjeong, Jinyeong and Jillye. Jinyeong is the passenger station that matters: KTX and SRT services stop there, and it connects the city to the capital in about three hours and to the Busan end in well under an hour. The old 1905 Jinyeong station building is now a public railway museum, which is the most Gimhae way imaginable of preserving a station.

Jinyeong carries KTX, SRT, ITX and Mugunghwa services
Freight rail

The Busan New Port line runs 21.3 kilometres from Jillye station to Busan New Port station, and the Jangyu freight station opened in November 2010 to serve it. Hallimjeong handles bulk cement, the only cement terminal on the Gyeongjeon line, with its own siding and silos. The Bujeon to Masan double track line opened in July 2024, which tightened the whole corridor.

Jillye junction to the new port, 21.3 km of dedicated line
Sea

Busan New Port is the load port for most Korean import and export boxes, about thirty to fifty minutes by road from the Gimhae parks depending on which gate you use. Busan to Manila is three to four days port to port on a direct sailing, or up to eighteen days on a relay through Singapore, Kaohsiung, Hong Kong or Shanghai. Busan to Cebu runs five to twelve days and Busan to Davao six to seven days on a direct feeder.

Direct to Manila 3 to 4 days, Davao 6 to 7 days

Schedules and transit times are planning figures drawn from published late 2026 timetables, carrier data and Korea Rail Network Authority route information. Confirm sailings, frequencies and terminal allocations at booking. The Philippines to South Korea freight page covers documents and customs practice, and the Gimhae airport profile covers the terminal itself.

Residence for the family that follows the plant

A Gimhae plant manager rarely moves alone, and the household question usually arrives in the second meeting. Korean communities already run in Angeles and Clark, Metro Manila, Metro Cebu, Metro Davao, Cagayan de Oro and Baguio, with Korean groceries, churches, clinics and English academies. The visa ladder below is the one a family actually climbs, and the numbers are the statutory deposit figures rather than a package price.

Which route fits which household

The Special Resident Retiree's Visa is the standard route. It opens at age 40, requires a deposit in a Philippine bank, and gives indefinite stay with multiple entry while the deposit remains. The deposit is refundable on cancellation and can be converted into approved investments such as a condominium unit or a long term lease.

An investor who wants residence tied to a business or a financial placement uses the Special Investor's Resident Visa. A Korean spouse of a Filipino citizen uses the 13(a) non quota immigrant visa, which is permanent residence rather than a renewable retiree status. For a working executive, the 9(g) pre arranged employment visa is the normal route and is filed by the Philippine employer.

Where to live follows the plant. Parts and electronics work in Laguna or Cavite puts the household in Santa Rosa, Binan or Dasmarinas. A Clark operation puts it in Angeles. A Cebu operation puts it in Mandaue or Lapu Lapu. A Davao Region operation puts it in Davao City or Tagum City, where the cost of living is lower, the air is cleaner and the commute to a uniform plant is ten minutes.

An illustrative budget outside Metro Manila runs about ₱45,000.00 a month for a single executive in a serviced unit, about ₱75,000.00 for a couple in a two bedroom lease, and about ₱120,000.00 for a family of four with school fees. That is roughly $716, €624 or £536 at the low end, and $1,909, €1,665 or £1,429 at the high end, converted at the same rate family the site currency switcher uses, so treat the foreign figures as approximate.

Deposits are statutory United States dollar amounts fixed by the Philippine Retirement Authority, so they are not converted here. The peso equivalent moves with the exchange rate. Fees, medical requirements and renewal rules change, and should be confirmed before filing. Household figures are illustrative, not quotations.

Six checks that change the answer

A site visit answers fewer questions than a document pack does. These six are the ones that most often move a Philippine decision after the first meeting, and every one of them is cheaper to resolve before the lease than after it.

  • 01
    Tariff line and rules of origin

    Confirm the exact product code under the Philippines Korea agreement and whether the bill of materials meets the regional value content or tariff shift rule. A zero headline rate is not a zero duty outcome if the origin test fails.

  • 02
    Zone or board registration

    PEZA suits an export manufacturer inside a zone. The Board of Investments suits a project outside one, or a domestic market enterprise. The incentive package, the import treatment and the reporting duties differ, and the choice is made before the site.

  • 03
    Power, water and redundancy

    Ask for the local utility's industrial tariff, the substation capacity at the gate, the water source and the backup arrangement. A machining cell cannot absorb a two hour outage, and the answer differs by park.

  • 04
    Port cut off and sailing frequency

    Confirm the weekly cut off at the chosen load port, the transit time to Busan, and the feeder schedule if the box relays. A four day sailing becomes a three week cycle if the cut off is missed twice.

  • 05
    Documents in Korean and English

    Work instructions, inspection reports, material declarations and carton marking should be issued in both languages. Korean size charts and Korean language labels belong in the first sample pack, not the third revision.

  • 06
    Tooling and intellectual property

    Register the design and the mark, state who owns the tooling, and agree the audit right before production starts. A supplier that holds your moulds holds your schedule.

What Gimhae clients ask before they commit

The questions below come from parts suppliers, plant managers and households planning a move. Each answer is written for a first conversation rather than a legal opinion, and each one names the constraint instead of hiding it.

Does Gimhae have a direct flight to the Philippines?

Yes, and that is unusual for a Korean city of this size. Gimhae International sits on the Busan boundary and carries nonstop services to Manila on Philippine Airlines, to Cebu on Air Busan, Jeju Air and Jin Air, to Clark on Jin Air and to Bohol Panglao on Jeju Air. Jeju Air adds five weekly Manila flights from 17 December 2026, leaving at 21:30 and landing at 00:45. Flight time is about four hours.

What does Gimhae actually manufacture?

Metal and machine work above all: automotive components for the Ulsan and Changwon assembly chains, ship and marine parts for the Busan and Ulsan yards, aircraft machined parts, industrial machinery, pumps, valves, moulds and packaging equipment. The city publishes a manufacturing share of gross regional product at 45.3 percent and describes itself as one of the three largest concentrations of manufacturing firms in the country.

Is Gimhae a good place to recruit engineers?

Better than most Korean cities of its size. Average age is 44.1, the youngest in Gyeongsangnam, and residents in their twenties and thirties are 22.0 percent of the population. Inje University runs its Gimhae campus at Inje ro 197, the light rail has a station named after it, and a ring of technical high schools feeds the parks. The constraint is the same everywhere in Korea: the pool is deep but it is not growing quickly.

Does the Philippines Korea free trade agreement cover goods made in the Philippines?

It removed tariffs on 94.8 percent of Philippine exports to Korea when it took effect on 31 December 2024, with staging for the balance. Coverage depends on the tariff line and on whether the goods meet the rules of origin, so the product code and the bill of materials should be checked before production starts rather than before the vessel sails. ASEAN Korea and RCEP remain available where content is mixed.

Can a Korean company own a Philippine plant outright?

Yes, in most manufacturing activities. The Foreign Investments Act, Republic Act 11647, opened activities outside the negative list to full foreign equity, with a paid in capital threshold of US$200,000 for a domestic market enterprise, or US$100,000 where advanced technology is involved or at least 50 direct workers are employed. Land cannot be owned outright by a foreign entity, so a long term lease inside a zone or under the Investors Lease Act is the normal structure.

What incentives apply to a parts or assembly project?

Registration with PEZA for an export enterprise inside a zone, or the Board of Investments for a project outside one, brings the CREATE MORE package: 20 percent corporate income tax, a four to seven year income tax holiday, the five percent special corporate income tax on gross income in lieu of national and local taxes for export enterprises, enhanced deductions for power, labour, training, research and depreciation, and duty free import of capital equipment.

Where should a Gimhae supplier put its Philippine plant?

It follows the customer and the port. Auto parts, harness and injection work suits Laguna, Cavite and Batangas. Marine and ship components suit Metro Cebu, Batangas and Subic. Aerospace machining suits Clark, Laguna and Metro Cebu, where the aerospace supply chain and the engineering labour already exist. Plant workwear and cleanroom programmes suit Tagum City in the Davao Region, which ships through Davao to Busan in six to seven days.

What can RB Advertising supply to a Korean plant operator?

Cleanroom and industrial uniform programmes from Tagum City in the Davao Region: ESD cleanroom garments, frocks, hoods, boots, high visibility vests and jackets, flame resistant coveralls, polo shirts and outerwear. Standard uniform pieces start at ₱320.00 per piece, about $5.10, €4.45 or £3.85, and technical outerwear starts at ₱750.00 per piece, about $11.95, €10.40 or £8.95. Minimum order is 12 pieces per design, with Korean and Filipino size curves in one programme.

Commercial desk

Talk with RB Advertising

For Gimhae manufacturers, parts suppliers, plant managers and households planning a move, our commercial team handles production enquiries, sample requests, freight planning and site visits in the Davao Region. Office hours: Mon to Sat, 8:30 AM to 5:00 PM (PHT). Address: Naungayan Building, Aala Road, Barangay Mankilam, Tagum City, Davao del Norte, Philippines.