Czechia, aerospace, and the Philippine base

PBS Group: Czech Aerospace Precision, Philippine Production

PBS GROUP a.s. builds the small turbine engines, auxiliary power units and superalloy castings that keep unmanned aircraft and helicopters flying, from a plant in Velká Bíteš in the Czech Republic. In February 2025 the company walked into Manila with a Czech Ministry of Defence business delegation. This page reads that visit as what it is: a European tier supplier looking at the Philippines as a production, maintenance and investment base, and a country that has just written the law to receive one.

  • 900+ Employees across the group
  • 200+ Years of engineering tradition
  • CZK 2.2bn Group turnover, on company reported figures
  • 90% Of output exported

01 / The company

A holding company built around one factory floor

PBS GROUP is not a brand assembled for export marketing. It is a Czech holding whose depth sits in a single industrial site at Velká Bíteš, where design, casting, machining, assembly, testing and overhaul all happen under one roof. That matters to a Philippine partner, because it means the counterpart on the other side of a technology transfer is an operator, not a broker.

The group traces its engineering lineage through První brněnská strojírna, a Brno machinery house with roots in the nineteenth century, and the plant at Velká Bíteš that has carried the aviation work. Two hundred years of company history is the marketing number. The operative number is fifty: five decades of continuous turbine engine development on that site, with its own test cells, its own foundry, and its own design organisation approval from the European Union Aviation Safety Agency.

Today the group runs as a holding with six companies, including PBS Aerospace in the United States, PBS India, and PBS International Trading for the commercial side. Export accounts for about ninety percent of turnover, which tells you the business is already used to shipping certified hardware into foreign jurisdictions, dealing with foreign airworthiness authorities, and supporting operators who are not Czech speakers.

Holding
PBS GROUP a.s., Prague
Production site
Velká Bíteš, Vysočina Region
Group companies
Six, across Europe, the United States and India
Export share
About 90 percent of output
Own foundry
Nickel and cobalt superalloy investment casting
In house testing
Performance, endurance and altitude simulation cells
Design authority
EASA Design Organisation Approval
Production authority
EASA Production Organisation Approval

02 / What it builds

Five product families, one certified chain

The portfolio is narrow by conglomerate standards and deep by supplier standards. Each family below is a candidate for partial localisation, because each one has a labour intensive segment that can move without losing the certification that protects the brand.

Turbine engines

Thrust class 400 to 3,400 N

Small turbojet, turboshaft and turboprop units for unmanned aircraft, light and experimental aircraft, microjets and ultralight helicopters. Compact, high thrust for the weight, short start sequence, and flight envelopes reaching the high subsonic band.

The engines are the reason the company exists in the defence conversation. A drone engine is a consumable in a way that a widebody nacelle is not, and consumables reward a supplier who can assemble, test and overhaul close to the operator.

Localisation candidate: final assembly, test cell operation, line maintenance

Auxiliary power units

Up to 6 hours continuous, 9 year TBO

Onboard electrical power and compressed air for starting main engines and running systems without running the main engines. Used on fixed wing aircraft and helicopters, with an EASA approved design and production baseline and a stated time between overhauls of up to nine years.

An APU is a maintenance annuity. Every unit in a fleet comes back for overhaul, and every overhaul needs a shop with calibrated test equipment, trained technicians and an authority that accepts the paperwork.

Localisation candidate: APU and engine overhaul shop serving Southeast Asian operators

Environmental control

Cabin air and thermal management

Environmental control systems that manage cabin pressure, temperature and ventilation, developed in house and integrated into the airframe by the customer. This is the family that overlaps most directly with the Philippine cabin interiors cluster.

The Philippine angle is not a new factory on greenfield land. It is a supplier relationship with the seat, galley and monument builders already shipping into Airbus and Boeing programmes from Batangas and Clark.

Localisation candidate: ducting, heat exchangers, valve subassemblies, cabin integration

Investment casting

Nickel and cobalt superalloys

One of the larger European foundries for superalloy investment casting, producing turbine wheels, spinner discs, impellers and guide wheels, turbine blades and gas turbine segments, plus femoral components for knee replacement. Wax patterns, heat treatment, precision machining and surface finishing sit in the same building.

Verification runs through radiographic inspection, chemical analysis, three dimensional measurement and penetrant testing in an internal laboratory, with rapid prototyping for design verification before a tool is cut.

Localisation candidate: wax room, shell building, finishing and inspection for mature part numbers

Cryogenics and power

Helium turboexpanders and surface treatment

Cryogenic equipment including helium turboexpanders and low temperature compressor cascades, power engineering hardware, and galvanic surface treatment. These lines serve industrial gas, energy and medical customers rather than aviation, which widens the set of Philippine buyers a partnership could address.

Localisation candidate: precision machining, surface treatment capacity, medical device finishing

03 / The Philippine door

What happened in Manila in February 2025

This is the part of the page that is documented rather than projected. The Czech Republic sent its defence minister to Manila for the first time, with thirteen companies behind her, and the Philippines had just passed the law that gives such a visit a commercial destination.

  1. 8 October 2024: the Philippines passes the SRDP Revitalization Act. Republic Act 12024 rebuilds the Self-Reliant Defense Posture programme and instructs the Department of National Defense to develop a domestic defence industry through technology transfer, joint ventures and incentives. It creates an Office of the Undersecretary for Defense Technology Research and Industry Development, and it puts countertrade and offset into procurement policy.

  2. 5 February 2025: the Joint Defense Committee resumes. The Philippine Czech mechanism had been dormant. It reconvened with capability development, training and defence industry collaboration on the agenda.

  3. 20 February 2025: the first official visit by a Czech defence minister. Jana Černochová met President Ferdinand Marcos Jr. at Malacañang and Secretary of National Defense Gilberto Teodoro Jr. in Makati. Both sides discussed the SRDP Act, the Armed Forces modernization programme, cybersecurity skills and the West Philippine Sea.

  4. The same week: thirteen Czech companies, one business forum. The ministry ran an industry forum in Manila with more than fifty Philippine participants from the security services and the private sector. PBS GROUP was in the delegation, represented by Petra Nečasová, and its own account of the mission records a meeting with the Philippine Deputy Minister of Defence on future defence and aerospace cooperation.

  5. Since then: a corridor, not a headline. Czech defence exports to the Philippines reached about US$4.8m in 2025 on UN Comtrade figures, roughly 3.7 percent of a Czech export line to the country that grew 77 percent in a year to US$130.1m. Small numbers, steep direction. The opening is real and early, which is exactly when a supplier with a production plan can still shape the terms.

Why the SRDP Act matters to an engine maker

Republic Act 12024 does not simply invite foreign suppliers to sell. It creates a preference for an in country enterprise: a Filipino owned firm, or a joint venture in which Filipinos hold at least sixty percent, that keeps a substantial portion of development, production, assembly, servicing or operation inside the Philippines. Procurement is directed to integrate countertrade and offset, and local content is written into the rules. For a company like PBS GROUP the practical reading is simple. Selling finished engines into the Philippines is one business. Putting assembly, test and overhaul inside a sixty forty joint venture is a different and better protected business.

04 / Transfer matrix

Matching each PBS line to a Philippine counterpart

Nothing in this table is a signed deal. It is the pairing logic a site selection team would work through, matched to capability that already exists in the country rather than to land that happens to be available.

Indicative localisation pairings between PBS GROUP product families and existing Philippine capability.
PBS capabilityPhilippine counterpartEntry route
Superalloy casting, wax and shell roomPrecision machining and tooling shops around First Philippine Industrial Park in Sto. Tomas, Batangas, and the Baguio City Economic Zone, where Moog Controls has run flight control hardware for decades.Joint venture with an existing metalworking enterprise under a PEZA or Board of Investments registration.60/40 JV
Engine and APU assemblyElectronics and electromechanical assembly capacity across CALABARZON, with an English speaking technical workforce and a deep bench of process engineers.Wholly foreign owned export enterprise, 100 percent equity outside the Foreign Investment Negative List.PEZA
Test cell and qualificationClark Freeport, where MRO operators and an aerotropolis plan are already in place around Clark International Airport, with room for heavy test infrastructure.Lease inside the freeport, with the Civil Aviation Authority of the Philippines as the local authority interface.Clark
APU and engine overhaulThe MRO cluster at Pasay and Clark, where Lufthansa Technik Philippines, SIA Engineering, Metrojet Engineering and Aviation Partnership Philippines already hold approvals and trained mechanics.Service agreement and later equity in a local shop, or a dedicated bay inside an existing facility.MRO
Environmental control subassembliesCabin interiors and monuments built by Collins Aerospace in Batangas and by Jamco Philippines at Clark and Parañaque, shipping into Airbus and Boeing programmes.Supplier qualification into the existing cabin supply chain before any new plant is considered.Tier 2
Cryogenic and medical componentsPrecision machining, surface treatment and medical device finishing capacity serving the semiconductor, industrial gas and healthcare sectors.Contract manufacturing with a technology licence, then a dedicated line as volumes justify it.Licence

Read the neighbouring pages for the detail behind each row: the aerospace cluster map, the defence procurement framework, and the parts manufacturing scope.

05 / Terms on the table

The numbers a Czech board would ask for

Three sets of figures decide whether a Philippine plant is worth a board paper: what the corridor already moves, what the incentive regime grants, and what the industrial base has proved it can export.

The trade corridor in 2025

Total merchandise trade
US$730.89m, up 19.3 percent on 2024
Philippine exports to Czechia
US$600.81m, up 11.4 percent
Czech exports to the Philippines
US$130.08m, up 77.1 percent
Balance
US$470.74m in the Philippines' favour
Largest Czech export line
Electrical machinery and electronics, 56.1 percent of the flow
Arms and ammunition
3.7 percent of the flow, about US$4.8m
Largest Philippine export line
Machinery and mechanical appliances, 42.8 percent of the flow
Reporting basis
UN Comtrade, Czech reported flows, calendar 2025

The incentive regime

Corporate income tax
20 percent under CREATE MORE, Republic Act 12066
Income tax holiday
Four to seven years, depending on tier and location
Export enterprises
5 percent special rate on gross income in place of national taxes
Foreign equity
Up to 100 percent for export manufacturing outside the negative list
Paid in capital
US$200,000, or US$100,000 with advanced technology
Registration bodies
PEZA, Board of Investments, Clark Development Corporation, Subic Bay Metropolitan Authority
Defence specific route
SRDP Act joint venture with at least 60 percent Filipino ownership, with offset credit
Working language
English across contracts, drawings, audits and shop floor documentation

The industrial base, in export terms

Aerospace exports
US$603.1m in the first nine months of 2025, against US$590.2m for all of 2024
PEZA aerospace projects
Sixteen registered projects, over ₱26 billion in investments
Aerospace workforce in zones
More than 11,500 workers
Regional MRO demand
About US$7bn over five years, growing near 6.4 percent a year

Incentive terms, zone rules and tariff treatment change with every congressional session. Treat the figures above as the starting position for a conversation with the Board of Investments and with your own tax counsel, not as a settled entitlement.

06 / Travel log

Prague to Manila, and the week after the meeting

There is no nonstop flight between the Czech Republic and the Philippines. The distance is 9,935 kilometres and every itinerary connects, which turns a site visit into a two day journey each way. Plan it properly and the same trip carries the factory tour, the agency meetings and a few days of the country that makes the investment case easier to defend at home.

Via Istanbul

About 16h 25m in the air

The shortest one stop pattern, daily, with the Prague leg under three hours and the long sector across the Gulf and the Bay of Bengal. Best choice when the calendar is tight and the first meeting is in Manila.

Via Doha, Dubai or Abu Dhabi

About 17h to 18h

The most used connections from Prague and the widest choice of departure times. Useful if the itinerary continues to Clark instead of Manila, since the Gulf carriers feed both gateways.

Via Seoul

About 17h to 19h

The best option for a Cebu or Clark arrival, and the one that adds an industrial stop if you want to see a second Asian manufacturing base on the same ticket.

Manila runs six to seven hours ahead of Prague depending on daylight saving. An evening departure from Václav Havel lands in Manila in the early evening of the following day, which is the pattern that preserves the first working morning.

Three days in Luzon

Intramuros and the National Museum in Manila, then north to Clark for the aviation complex at the former United States air base. Add the February balloon fiesta at New Clark City if the dates line up.

Four days in the Visayas

Cebu for the MRO and shipbuilding base, Bohol for the Chocolate Hills and the tarsier sanctuaries, or Siargao for the surf coast. One short domestic flight from Manila in each case.

Two days in Mindanao

Davao and Tagum City, where our own production floor sits, then the highlands around Mount Apo. The southern manufacturing belt is the part of the country most foreign buyers never visit.

Entry formalities for Czech passport holders

A Czech passport enters the Philippines visa free for thirty days under Executive Order 408, with a passport valid at least six months beyond the intended stay, a return or onward ticket, and an eTravel registration completed within seventy two hours before arrival. The stay can be extended in country at a Bureau of Immigration office, and long stay options exist through the usual visa categories. Rules are applied at the border by the Bureau of Immigration and are revised without much notice, so confirm your own case with the Philippine Embassy in Prague before booking, and again in the week of travel.

07 / Where a plant lands

Four addresses, four different reasons

Site selection for aerospace work is a short list in any country. In the Philippines it comes down to where the certified supply chain already sits, where the airfield is, and where the technical university keeps producing machinists.

Sto. Tomas, Batangas
First Philippine Industrial Park, anchored by Collins Aerospace. The deepest aerospace supply chain in the country and the natural home for a casting or subassembly partner.
Baguio City
Moog Controls inside the Baguio City Economic Zone. Precision machining talent, lower land cost, and a university pipeline. Road access to Manila is the constraint.
Clark Freeport
Pampanga. Aviation capital plan, international airport, existing MRO operators, and space for heavy test infrastructure. The obvious address for an engine or APU test cell.
Metro Manila
Pasay and Parañaque. Lufthansa Technik Philippines at Villamor beside the international terminal. Best for overhaul bays and commercial functions, worst for land cost.

The partner question comes before the site question

Under the SRDP Act the protected structure is a joint venture that is at least sixty percent Filipino owned. That single provision decides the deal shape before a hectare is chosen. A Czech supplier should be talking to existing precision manufacturers, not to industrial park sales teams, because the Filipino partner brings the local content credit, the registration history and the political cover that a greenfield foreign entrant cannot manufacture on its own.

08 / Questions

The questions this page gets asked

Short answers, including the one about the name, because there is more than one PBS Group in the world.

Is this the same PBS Group that operates in the Caribbean?

No. There are two unrelated companies using the name. PBS GROUP a.s. is the Czech aerospace holding described on this page, registered in Prague under company ID 61057801, with production in Velká Bíteš. Productive Business Solutions Limited, which trades as PBS Group, is a technology and printing distributor headquartered in Barbados and listed on the Jamaica and Barbados exchanges. This page covers the Czech company only.

What does PBS GROUP actually manufacture?

Small turbine engines from 400 to 3,400 newtons of thrust for unmanned and light aircraft, auxiliary power units for fixed wing aircraft and helicopters, environmental control systems, nickel and cobalt superalloy investment castings including turbine wheels, impellers, blades and medical femoral components, cryogenic equipment such as helium turboexpanders, and galvanic surface treatment.

Does PBS GROUP already operate in the Philippines?

There is no announced Philippine plant, joint venture or customer contract. What exists is a documented visit: PBS GROUP joined the Czech Ministry of Defence business delegation to Jakarta and Manila in February 2025, alongside thirteen Czech firms, and its own account records a meeting with the Philippine Deputy Minister of Defence on defence and aerospace cooperation. Treat the rest of this page as the opportunity map that visit opened, not as an existing footprint.

What is the SRDP Act and why does it matter here?

Republic Act 12024, the Self-Reliant Defense Posture Revitalization Act, was signed on 8 October 2024. It directs the Department of National Defense to build a domestic defence industry through technology transfer, joint ventures and incentives, creates an office for defence technology research and industry development, and writes countertrade and offset into procurement. It favours an in country enterprise, meaning a Filipino owned firm or a joint venture that is at least 60 percent Filipino owned and keeps substantial production inside the Philippines.

Can a Czech company own a Philippine plant outright?

Yes for export manufacturing. Activity outside the Foreign Investment Negative List allows up to 100 percent foreign equity, with a minimum paid in capital of US$200,000, or US$100,000 where advanced technology is deployed. Defence production sold to the Philippine government is different, because the SRDP Act routes that work through the in country enterprise structure.

Is there a direct flight from Prague to Manila?

No. Every itinerary connects, most often through Istanbul, Abu Dhabi, Seoul, Doha or Dubai. The fastest one stop pattern is about 16 hours 25 minutes in the air, and door to door times of 17 to 20 hours are normal. The distance is 9,935 kilometres and Manila is six to seven hours ahead of Prague depending on daylight saving.

Do Czech citizens need a visa for the Philippines?

No visa is needed for a stay of up to thirty days under Executive Order 408. Carry a passport valid for at least six months beyond departure, a return or onward ticket, and an address in the country, and complete the eTravel form within 72 hours before arrival. The stay can be extended at a Bureau of Immigration office once you are in the country.

Can a visiting delegation see a working Philippine factory?

Yes. Our production floor is in Tagum City, Davao del Norte, in the south, with a second office in Cagayan de Oro. We host institutional buyers, sourcing teams and visiting manufacturers who want to see contract manufacturing operating in the country rather than on a slide. Send your dates through any of the contact channels below and we will build the visit around your meetings in Manila or Davao.

Continue from here

Coming from Czechia, or building the Philippine side of the deal?

Tell us your dates, your counterpart, or the capability you want to localise. Our team in Tagum City and Cagayan de Oro will reply. Business hours: Mon to Sat, 8:30 AM to 5:00 PM (PHT).

Company facts come from PBS GROUP a.s. corporate disclosures at pbs.cz and pbsaerospace.com, covering the about page, the aerospace and investment casting pages and the auxiliary power unit page. The February 2025 mission is documented by the Czech Ministry of Defence business delegation, the Philippine News Agency report of 20 February 2025, the Department of National Defense statement on the resumption of the Joint Defense Committee on 5 February 2025, and the Czech Embassy in Manila economic note of March 2025. Legal references are Republic Act 12024 or the SRDP Revitalization Act signed 8 October 2024, and Republic Act 12066 or CREATE MORE. Trade figures are UN Comtrade calendar 2025 bilateral flows as reported by Czechia. Philippine arrivals data is the Department of Trade and Industry Bureau of Policy Research and Innovation count for full year 2025. Aerospace export, PEZA and workforce figures follow Board of Investments and Philippine Economic Zone Authority releases as used on our aerospace industry page. Flight times and connections reflect published schedules for 2026. Rules on entry, incentives, ownership and procurement change without notice, so confirm all four with the Philippine Embassy in Prague, the Board of Investments, PEZA and your own legal counsel before committing capital or booking travel. This page is a research overview and is not investment, legal, tax or accounting advice.