Defense prime dossier Evidence dated November 2026 · Arlington to Batangas

Raytheon · RTX Corporation

Raytheon (RTX) and the Philippines: Defense, Aerospace Manufacturing and Investment Hub

RTX Corporation reported USD 25.0 billion in third quarter 2026 sales, up 11 percent, on a record USD 340 billion backlog. Its Raytheon segment, the missile, radar and air defense business that most Philippine readers mean when they say Raytheon, booked USD 52.3 billion in the quarter and closed September with a USD 130 billion defense backlog. The Philippine link is not a brochure claim either. RTX's Collins Aerospace unit has manufactured aircraft interiors in Batangas since 2012, employs about 3,000 people there, and is adding a 7,846 square metre facility that opens in the third quarter of 2026. This dossier separates what exists from what does not, then sets out the manufacturing, sustainment and investment case that follows from it.

Reality check

What the Philippines actually holds, and what it does not

The fastest way to lose a serious investor or procurement reader is to imply that Raytheon builds missiles in the country. It does not. The honest position is stronger than the invented one, so this page opens with both columns.

In the country today
  • A Collins Aerospace campus at Tanauan City in Batangas, producing galleys, galley inserts, lavatories, oxygen systems and cabin seats for Boeing, Airbus and Embraer platforms.
  • About ₱7.74 billion of capital invested since 2010, and a 7,846 square metre expansion agreed on 8 January 2026 at the First Philippine Industrial Park, scheduled to open in the third quarter of 2026.
  • Raytheon built munitions in forward service: Tomahawk and Standard Missile 6 are the rounds carried by the Typhon battery that Philippine forces have asked to keep in country for more than 30 consecutive months.
  • A tier one and tier two aerospace supplier base already exporting flight control actuation, cabin interiors, seats and sub assemblies into Boeing and Airbus programmes.
  • An electronics base that carried 58.8 percent of national merchandise exports in 2025, with PEZA approving ₱216.46 billion of investment in the first eight months of 2026 alone.
Not in the country
  • No Raytheon factory, engineering centre or registered office in the Philippines. Raytheon production remains in the United States.
  • No licensed missile production, final assembly or co production line for any Raytheon effector on Philippine soil.
  • No confirmed selection of the PhantomStrike radar for the FA-50PH upgrade. Raytheon is reported as a contender, and the choice has not been disclosed.
  • No Philippine order for Patriot, NASAMS, LTAMDS or SPY-6. All four are Raytheon products, and none appears in a signed Philippine contract.
  • No exemption from ITAR or United States export licensing for Raytheon sourced technology, and no Philippine facility holds the clearances that work would require.

01 · The group

Raytheon is one third of RTX, and the third that matters for defense work

RTX was assembled in 2020 and dropped the Raytheon Technologies name in 2023. The group reports three segments. Confusing the segment with the parent is the single most common error in Philippine coverage of this company, and it matters commercially because the segment with the local factory is not the segment named Raytheon.

Collins Aerospace

Cabin interiors, seating, actuation, avionics and mission systems. This is the segment that owns the Batangas campus and the 3,000 Philippine jobs.

USD 8,382 mThird quarter 2026 sales, up 10 percent

Pratt & Whitney

Commercial and military engines plus aftermarket. Its F100-PW-229 is one of the two engine options written into the Philippine F-16 package notified in January 2026.

USD 9,231 mThird quarter 2026 sales

Raytheon

Missiles, air and missile defense, radars, effectors and command systems. Patriot, Standard Missile, Tomahawk, AMRAAM, SPY-6, LTAMDS, NASAMS and PhantomStrike all sit here.

USD 8,031 mThird quarter 2026 sales, up 14 percent, 14.1 percent margin

Segment figures are for the quarter ended 30 September 2026. The Raytheon segment runs on a fiscal calendar, so its quarter closed on 27 September 2026. Group sales were USD 24,965 million in the same period, and the company guides full year 2026 adjusted sales to USD 97.0 billion to USD 97.5 billion.

02 · Demand signal

What a USD 130 billion defense backlog means for a supplier decision

A book to bill of 6.54 in a single quarter tells a Philippine supplier something specific: the constraint at Raytheon is production capacity and supply chain throughput, not order intake. That is the condition under which new qualified suppliers get added.

USD 8,031 m Raytheon third quarter 2026 sales, up 14 percent year on year
14.1% Segment operating margin, up 190 basis points, on USD 1,133 million of profit
USD 52.3 bn Quarterly bookings, a book to bill of 6.54 and a rolling 12 month figure of 2.9
USD 130 bn Defense backlog at 30 September 2026, against USD 75 billion at 31 December 2025

Awards booked in the third quarter of 2026

  • Tomahawk multi year production, US NavyUSD 23 bn
  • AMRAAM multi year production, US Air ForceUSD 14.3 bn
  • Army Collective Training Systems, United KingdomUSD 3.1 bn
  • Classified and confidential contractsUSD 3.0 bn
  • SPY-6 hardware production and sustainmentUSD 1.8 bn
  • Standard Missile 3, Missile Defense AgencyUSD 0.7 bn
  • NASAMS sustainment, international customerUSD 0.6 bn
  • Specter rifle sights, German Armed ForcesUSD 0.6 bn
  • LIDS counter unmanned aircraft systemUSD 0.6 bn

Every figure in this section is drawn from the RTX third quarter 2026 results release of 20 October 2026 and the accompanying Form 10-Q. Awards are bookings, not cash, and multi year contracts convert to revenue across their production schedules.

03 · Philippine footprint

Fourteen years of RTX manufacturing in Batangas, in six dated moves

This is the part of the story that is already built and already shipping. It belongs to Collins Aerospace rather than to Raytheon, and it is the reason a Philippine supplier conversation with RTX is credible at all.

  1. 2010 PEZA registered investment begins Philippine Economic Zone Authority records show roughly ₱7.74 billion of cumulative capital investment in the local operation from this point, spread across the Tanauan campus and its later expansions.
  2. 2012 The Tanauan City facility opens The site starts on cabin interior work at the First Philippine Industrial Park, eventually covering galleys, galley inserts, lavatories, oxygen equipment and seating across 698,000 square feet of manufacturing, warehouse and office space.
  3. January 2024 First aircraft seats ship from the Philippines to Airbus The Meridian main cabin seat became the first seating shipment from Batangas, supporting a narrow body linefit programme. Seat assembly capacity was scheduled to triple through 2024 across 14 customers.
  4. February 2024 The campus moves to 100 percent renewable electricity The Tanauan site sources 36,000 megawatt hours a year from a local geothermal plant, cutting about 25,000 tonnes of carbon dioxide equivalent annually. It is one of the group's larger renewable projects worldwide.
  5. 8 January 2026 A 7,846 square metre expansion is signed Collins Aerospace and the First Philippine Industrial Park agreed a new building inside the 600 hectare estate, which already hosts about 80,000 workers. The stated purpose is output growth and operational efficiency for a rising global aircraft build rate.
  6. Third quarter 2026 The new building opens The expansion brings the Philippine campus to seven cabin interior product lines, with local seats already flying on the refurbished Airbus A321ceo fleet of Philippine Airlines and the company publicly signalling further supply chain localisation.

Sourcing for this timeline: RTX newsroom releases of February and March 2024, Philippine Daily Inquirer reporting of May 2024 and February 2026, Department of Trade and Industry release of April 2024, and PEZA records cited in that coverage.

04 · In service

Where Raytheon hardware already touches Philippine defense

None of this is a factory. All of it is a sustainment, training, test equipment and integration demand signal, and it is the most concrete commercial foothold Raytheon has in the country.

Philippine status as reported in October 2026. The Typhon launcher is a Lockheed Martin system; the rounds it fires are Raytheon products.
SystemWhat it isPhilippine statusIndustrial consequence
TomahawkLong range cruise missileCarried by the Typhon battery kept forward at Philippine request for more than 30 consecutive months, as confirmed by United States Army leaders in October 2026Canister handling, environmental protection, test equipment and training demand in a tropical operating environment
Standard Missile 6Multi mission surface to air and anti ship missileSame forward battery, same sustained tropical exposureRadio frequency module test, seeker support and calibration work
AIM-9X Block IIShort range air to air missile40 rounds included in the USD 5.58 billion F-16 package notified to Congress in January 2026Munitions handling, captive training hardware and depot level support
F100-PW-229Fighter engine, Pratt & WhitneyOne of two engine options in the same F-16 package, alongside the General Electric F110Engine line maintenance and module exchange if the Pratt option is selected
PhantomStrikeAir cooled gallium nitride AESA radarReported contender for the FA-50PH Block 70 radar upgrade. The radar choice has not been disclosedAvionics integration, test benches and software support, conditional on selection
Patriot, NASAMS, LTAMDS, SPY-6Air and missile defense, sensors and naval radarNo Philippine order. These are candidate capabilities under the Re-Horizon 3 programme, not signed contractsFuture opportunity only. Do not build a business plan on an unsigned requirement

Typhon has sustained two and a half years of heat, humidity and road movement in the Philippines. That experience is a genuine data set for any supplier interested in environmental qualification, containerisation and field sustainment work.

05 · Manufacturing case

Three entry points, ordered by what a Philippine site can actually win

The temptation is to open with missile assembly. That is the least likely first contract and the one most exposed to export control. Work backwards from what already ships, and the sequence is clearer.

01

Cabin interiors and aerostructures

Galley structures, inserts, lavatories, seat frames, oxygen systems and interior fit out. This is proven in country, already at tier one quality levels, and sits inside an ecosystem that has been audited by Boeing and Airbus for more than a decade. New capacity here faces the shortest qualification path and the least export control friction, because most cabin goods are commercial rather than defense articles.

Proof point
Seven cabin product lines shipping from Batangas, including seats to Airbus since January 2024
What it takes
AS9100 quality system, NADCAP special process accreditation, composites and sheet metal capability
02

Defense electronics assembly and test

Cable harnesses, radio frequency modules, power electronics, ruggedised box build and automated test. The Philippines already runs this discipline at semiconductor scale, so the gap is not process capability. It is documentation, traceability and the licensing route that lets a facility receive controlled technical data at all.

Proof point
Electronics carried 58.8 percent of merchandise exports in 2025 and 71.4 percent in August 2026
What it takes
Strategic goods registration with the STMO, ITAR aware compliance, controlled area security and counterfeit part controls
03

Sustainment, calibration and depot support

Test equipment, calibration laboratories, canister and container refurbishment, field service support and training devices. Demand is real and recurring once a system is in country, and the barrier is trust plus licensing rather than capital. This is also the entry point that pairs naturally with the Clark and Basa air base operating environment.

Proof point
Forward deployed Raytheon rounds already generate recurring sustainment demand in country
What it takes
US export authorisation, facility security where classified work applies, and original equipment manufacturer approval

06 · Participation ladder

Industrial participation is a ladder, not a press release

Philippine offset and countertrade policy asks foreign primes to return value to the local base. In practice that return arrives in five stages, and a supplier or a government negotiator should know which stage a conversation is actually at before promising anything.

  • Offset credit and sourcing commitments Stage 1
    Paper commitment to buy or place work locally, with a value attached. Easiest to sign, easiest to quietly miss.
  • Supplier qualification Stage 2
    Audit, quality system approval and first article inspection. Typically 12 to 24 months of work before revenue.
  • Build to print Stage 3
    The prime owns the design and the Philippine supplier owns process control, traceability and delivery. This is where most local aerospace work sits today.
  • Build to spec and design authority Stage 4
    Engineering change authority, qualification testing and configuration control transfer to the local partner.
  • Licensed co production or assembly Stage 5
    The top of the ladder and the hardest, because it requires a government to government framework, an export licence and a security agreement before a single line is laid down.

The bar lengths are a comparative depth indicator for the reader, not measured data. Stage descriptions follow the standard offset ladder used in Philippine Air Force and Department of National Defense countertrade discussions, and the aerospace roadmap sequence published by the Aerospace Industries Association of the Philippines.

07 · Incentives and sites

The incentive stack, and the sites that already host aerospace work

A defense or aerospace investor registers through PEZA or the Board of Investments and elects a fiscal regime under CREATE MORE. Defense related activity carries an explicit priority classification, which is unusual and worth knowing before a site shortlist is drawn.

Registration and fiscal instruments as published by the Department of Trade and Industry, PEZA and the Republic Acts cited. Confirm current terms with the investment promotion agency before modelling.
InstrumentWhat it gives an investorWhere it is written
CREATE and CREATE MOREIncome tax holiday then a choice between the special corporate income tax and the enhanced deductions regime at a reduced corporate rate. The Department of Trade and Industry states that defense related activities qualify for Tier II incentives, running 15 to 17 years depending on location and market orientationRepublic Act No. 11534 and Republic Act No. 12066, effective November 2024
PEZA registrationEcozone export enterprise status with duty free import of capital equipment and raw materials, plus the fiscal regime elected under CREATE MORERepublic Act No. 7916 as amended, and PEZA implementing rules
Foreign ownershipFull foreign equity in most manufacturing activities, with a minimum paid in capital of USD 100,000 for domestic market enterprises and a lower threshold for export enterprisesRepublic Act No. 11647, the amended Foreign Investments Act
Strategic goods licensingA Global Authorization route that streamlines repeated export and import of controlled strategic goods, which is the practical bottleneck for defense electronics workRepublic Act No. 10697, Strategic Trade Management Act, administered by the STMO
Land tenureLong lease rather than freehold, normally 75 years, which is the standard structure for a foreign industrial investorRepublic Act No. 7652, the Investor's Lease Act
First Philippine Industrial Park, Batangas 600 hectares and about 80,000 workers. Hosts the Collins Aerospace campus and its 2026 expansion. The most directly relevant address on this page.
Clark Aviation Capital, Pampanga Twin runways with SIA Engineering and Metrojet Engineering already running MRO. The centre of gravity for heavy maintenance and a proposed USD 400 million MRO facility.
Laguna Technopark corridor Electronics manufacturing services, actuation and interiors suppliers clustered along the CALABARZON belt south of Manila.
Baguio City export zone Moog Controls Philippines produces servo valves and flight control actuation, the deepest precision machining capability in the local aerospace chain.
Cavite Technopark Global Aerospace Technology Philippines is registered there to build unmanned aerial systems, special purpose machinery and aerospace components.
Metro Cebu International airport, container port, heavy maintenance cluster and a deep electronics workforce outside Luzon.

PEZA approved ₱216.46 billion of investment between January and August 2026, more than double the ₱105.83 billion approved in the same period of 2025, with manufacturing the largest category at 80 of 196 projects. PEZA is also drafting aerotropolis ecozone rules with the Civil Aviation Authority of the Philippines.

08 · Constraints

Four constraints that decide whether this becomes a real pipeline

A landing page that lists only advantages is a brochure. These are the four issues that actually stop Philippine defense manufacturing projects, and each is stated with its severity.

ITAR and United States export control

Any Raytheon sourced technical data or defense article is controlled. A Philippine facility cannot receive drawings, specifications or hardware without an approved export authorisation, and in some cases a technical assistance agreement. This alone rules out the naive version of the co production story.

Severity high

Qualification depth

AS9100 and NADCAP accreditation exist in the country, but the supply chain is thin beyond actuation, interiors and electronics assembly. Machining, surface treatment, heat treatment and composites still have few approved sources, which lengthens every new qualification.

Severity high

Power cost and reliability

Industrial electricity in the Philippines is among the more expensive in Southeast Asia, which matters for test heavy defense electronics. The Batangas geothermal supply is a genuine advantage for one campus but is not a national default.

Severity medium

Programme funding cadence

Philippine modernization funding has historically lagged the requirement list. Of 188 projects across three horizons, 59 had been completed as of early 2026. A supplier should size capacity against signed contracts, not announced requirements.

Severity medium

09 · Workforce apparel

What a defense and aerospace workforce actually wears

Every campus on this page has the same unglamorous requirement: a workforce dressed to a standard that survives a clean room, a paint bay, a hangar floor and a Philippine wet season in the same week. RB Advertising manufactures that layer in Tagum City, Davao del Norte, with in house embroidery, screen printing and sublimation, and we ship to industrial estates across the country.

What we make for this sector: coveralls and two piece work suits, high visibility vests and shirts, cotton and dry fit polo shirts for office and engineering staff, technical shirts, softshell and quilted outerwear, plus caps, aprons and lanyards for visitor and audit days. Decoration runs from a single embroidered logo to a full serialised carton programme with per site packing lists for multi location estates.

What we do not do: we do not manufacture aircraft components, we do not hold aviation certification for garments, and we will not describe a uniform as flame resistant or static dissipative unless the fabric mill certificate for that specific order supports it. Where a facility needs certified protective wear, we say so and quote the certified fabric rather than substituting.

10 · Questions

What suppliers, site selection teams and procurement officers ask first

Eight questions, answered directly, including the ones with an unflattering answer.

Does Raytheon have a factory in the Philippines?

No. As of November 2026 Raytheon holds no manufacturing plant, engineering centre or registered office in the Philippines, and no Raytheon effector is produced or assembled in the country. RTX does manufacture here, but through Collins Aerospace, at a cabin interiors campus in Tanauan City, Batangas.

Who is RTX, and how does Raytheon fit inside it?

RTX Corporation is the parent, headquartered in Arlington, Virginia, and listed on the New York Stock Exchange under RTX. It reports three segments: Collins Aerospace, Pratt & Whitney and Raytheon. Raytheon is the defense segment, covering missiles, air and missile defense, radars and effectors. The group reported USD 25.0 billion of sales in the third quarter of 2026.

How large is the RTX manufacturing operation in Batangas?

Collins Aerospace reports about 3,000 employees in the Philippines, 698,000 square feet of manufacturing, warehouse and office space, and 69,900 square feet of logistics space at the First Philippine Industrial Park. PEZA records cited in Philippine press put cumulative investment at about ₱7.74 billion since 2010. A 7,846 square metre expansion agreed on 8 January 2026 was scheduled to open in the third quarter of 2026.

Are Raytheon missiles made or assembled in the Philippines?

No. Raytheon rounds in Philippine service, including Tomahawk and Standard Missile 6 carried by the forward deployed Typhon battery, were manufactured in the United States. Any statement that Philippine industry assembles Raytheon missiles is false as of November 2026. What exists locally is sustainment demand, environmental qualification experience and a supplier base that could bid for component work if licensed.

Is the Philippines buying Patriot, NASAMS or SPY-6?

There is no signed Philippine contract for Patriot, NASAMS, LTAMDS or SPY-6. The Re-Horizon 3 modernization programme lists air and missile defense requirements, and Raytheon products are among the candidates any air defense decision would consider. Reported requirements are not orders, and a supplier should not size capacity against them.

What incentives apply to a defense or aerospace investor in the Philippines?

Registration runs through PEZA or the Board of Investments, with the fiscal regime elected under CREATE MORE, Republic Act No. 12066, which took effect in November 2024. The Department of Trade and Industry states that defense related activities qualify for Tier II incentives running 15 to 17 years depending on location and market orientation. Manufacturing investors also benefit from full foreign equity under the amended Foreign Investments Act and from duty free capital equipment import inside an ecozone.

Can a United States defense supplier own 100 percent of a Philippine operation?

Yes, in most manufacturing activities. Republic Act No. 11647, the amended Foreign Investments Act, permits full foreign equity with a minimum paid in capital of USD 100,000 for domestic market enterprises and a lower threshold for export enterprises. Land is held on a long lease, normally 75 years under Republic Act No. 7652, rather than freehold.

Can RB Advertising supply uniforms to an aerospace or defense facility?

Yes. We manufacture coveralls, work suits, high visibility vests, polo shirts, technical shirts and outerwear in Tagum City, Davao del Norte, with in house embroidery, screen printing and sublimation. Minimum order is 12 pieces per design, standard lead time is 15 to 25 business days after artwork approval, and quotations are issued in pesos with dollar, euro and pound equivalents. We do not manufacture aircraft components and we do not claim aviation certification for garments.

12 · Contact

Talk to the industrial desk

We work with site selection teams, aerospace and defense suppliers evaluating a Philippine base, and procurement officers sourcing industrial apparel. Enquiries are answered by a person, not a form.

Facility: RB Advertising, Naungayan Building, Aala Road, Barangay Mankilam, Tagum City, Davao del Norte, 8100 Philippines

Operating hours: Mon to Sat, 8:30 AM to 5:00 PM (PHT)

13 · Sources

Sources and scope

Company and segment figures: RTX Corporation third quarter 2026 results release of 20 October 2026, the accompanying Form 10-Q for the period ended 30 September 2026, and the earnings call transcript of the same date. Philippine manufacturing footprint: RTX newsroom releases of 19 February 2024 and 14 March 2024, Department of Trade and Industry news release of 12 April 2024, Philippine Daily Inquirer reporting of 22 May 2024 and 13 February 2026, and PEZA records cited in that coverage. Systems in service: Defense Daily reporting of 12 October 2026 on the Typhon battery, and the Federal Register notice of 12 January 2026 covering the proposed F-16 sale to the Philippines. Philippine industry data: SEIPI and Board of Investments export statements of October 2026, the Philippine Semiconductor and Electronics Industry Roadmap, PEZA investment approvals for January to August 2026, and the Philippine Aerospace Industry Roadmap. Incentives: Republic Act No. 11534, Republic Act No. 12066, Republic Act No. 11647, Republic Act No. 10697 and Republic Act No. 7652. Figures are stated as reported and are not restated for later revisions. Nothing on this page is legal, tax or investment advice, and no Philippine account is held by Raytheon or RTX as of November 2026.