Men's Tank Tops in Performance Polyester & Cotton
Crew, muscle cut, drop armhole, stringer, and longline tank tops for gyms, clubs, facilities, schools, events, and retail. Printed in full colour, graded XS to 3XL on a men's block, and cut to the brief you send rather than the nearest catalog shape.
- XS to 3XL men's block
- 160 to 200 GSM fabric range
- Sublimation, DTF, silkscreen
- 7 to 12 business days
| Shape | Crew, muscle, drop armhole, stringer, longline |
|---|---|
| Fabric | 160 to 180 GSM polyester, or 180 to 200 GSM cotton blend |
| Decoration | All over sublimation, DTF, silkscreen, embroidery |
| Sizing | XS to 3XL, men's block, fit sample first |
| Minimum | No strict minimum, better pricing from 10 pieces |
| Lead time | 7 to 12 business days after mockup approval |
| Colour match | Delta E below 2.0 with lab dip approval |
Men's Tank Top Pricing
Starting prices shown. The final quote depends on quantity, fabric, and decoration.
The five shapes men's tank tops are ordered in
Most men's runs settle on one or two of these. The shape decides the armhole drop, the strap width, and how much of the body the print actually covers, so it is the first decision in the brief.
- Crew neck
- Straight neckline and a standard armhole. The safest shape for uniform, staff, and PE use because it sits close to a regular shirt.
- Muscle cut
- A wide dropped armhole with a boxy body. The default training shape, and the one most often printed with a large back graphic.
- Drop armhole
- An extended shoulder with a loose armhole for full arm mobility. Common for strength training, outdoor work, and resort activity kit.
- Stringer
- A narrower shoulder with a deep armhole and a close body. Cut for gym floors and stage wear where the silhouette matters.
- Longline
- An extended hem that falls below the hip. Suits streetwear and retail lines, and gives a full back panel for a large print.
Chosen for the floor it is worn on
A tank top worn for training and a tank top sold as a souvenir fail for opposite reasons. One holds moisture badly, the other feels rough against the skin. The fabric weight and the fibre are set against the use, not against a single house standard.
Polyester performance fabric from 160 to 180 GSM is sweat wicking, breathable, and quick drying, which suits gyms, sports, outdoor work, and anything worn in direct heat. Cotton and cotton blends from 180 to 200 GSM give a softer hand feel for retail and souvenir lines, and take silkscreen and embroidery well. Both are quoted on the same brief when one order covers a training run and a retail run.
- Sweat wicking and quick drying
- 160 to 200 GSM across the range
- Lightweight and breathable in heat
- Colour held through repeat washing
- Cotton option for retail and souvenir
- Lab dip approval before bulk
Where the print lands on a men's tank top
A tank top exposes the shoulder and the armhole, so a print that works on a tee does not always survive the cut. These are the placements we set for men's runs.
Club badge or sponsor block, offset to miss the neckline scoop. Printed at a size that survives an armhole trim.
All over sublimation with a bleed into the neckline and the armhole so no white edge shows when the garment is worn.
Roster names set at a size read across a court, below the shoulder seam line rather than on it.
Large back graphic or number, with the bleed mirrored from the front panel so a full print reads as one piece.
Narrow sponsor strips sized for the strap width, so the print does not wrap over the edge of the panel.
Small marks, size references, and secondary sponsor logos placed clear of the hem fold and the side stitch.
Terms for a men's tank top run
Written for the person raising the order, whether that is a gym owner paying directly or a procurement officer raising a purchase order.
No strict minimum
Better pricing from 10 pieces. A small gym can order four sizes and still get a proper run.
7 to 12 business days
Counted after mockup approval. Rush production confirmed against your event date.
Delta E below 2.0
Pantone or hex input, with a lab dip approved before the bulk cut.
Fit sample before bulk
Send two people to try XS to 3XL. The bulk cut follows the approved sample.
Official receipt and BIR 2307
Purchase order and resolution to award accepted for LGU and school buyers.
Nationwide courier
LBC, JRS, DHL, and FedEx, including island and provincial addresses.
Same dye lot
Designs and colour channels archived, so a top up reads as the same kit.
Tagum City and Cagayan de Oro
Mankilam, Tagum City and Ficcoville, Iponan, Cagayan de Oro.
Ordered alongside men's tank tops
Pairs and add ons that most men's runs include on the same production run, so the colourway matches across the set.
Men's tank top questions
The answers buyers ask for before a men's tank top run is confirmed.
What men's tank top shapes do you cut?
Crew neck, muscle cut with a wide armhole, drop armhole, stringer, and longline. Neck depth, strap width, armhole drop, and hem length are confirmed from the mockup, so a shape that sits between two standards is still built to the brief rather than forced into a catalog cut.
What is the minimum order for men's tank tops?
There is no strict minimum on catalog styles and pricing is more competitive from 10 pieces. You can split those pieces across sizes, so a small gym can order four sizes and still get a proper run. Bulk club and facility orders are usually 24 to 200 pieces.
Which fabric is best for a gym tank top?
For gyms, training, and outdoor work in Philippine heat we recommend polyester performance fabric from 160 to 180 GSM. It is sweat wicking, lightweight, breathable, and quick drying. For retail, souvenir, and lifestyle lines we cut 180 GSM combed cotton and cotton blends where a soft hand feel matters more.
Can you print names and numbers on club tank tops?
Yes. Roster names, player numbers, sponsor logos, club badges, and event dates print at no extra design charge. Front and back placement is standard, and we set name blocks at a size that reads across a court, a gym floor, or a stage.
How long does a men's tank top order take?
Bulk production runs 7 to 12 business days after you approve the mockup. Rush production is available for an extra fee and is confirmed against your event date before we accept the order, so a date locked run is never quoted on a standard timeline.
Do you print across the full garment or only a panel?
Both. All over sublimation prints edge to edge on polyester with no colour limit and no white gaps, which suits jerseys, sponsor heavy designs, and pattern prints. DTF, silkscreen, and embroidery are used when the design is a small logo or a single chest badge rather than a full print.
Can you match our team or brand colours?
Yes. Send Pantone codes, hex values, or a printed swatch and we match to Delta E below 2.0 across the run, with a lab dip approved before bulk. This keeps a mid season top up reading as the same kit as the first batch.
What sizes do men's tank tops come in?
XS to 3XL, graded on a men's block for each shape rather than scaled from one pattern. Sending two people to try a fit sample before the bulk cut is the fastest way to confirm the armhole and the hem, and it removes almost all sizing risk from the order.
Can we reorder the same men's tank top next season?
Yes. Designs are archived with their colour channels and size run, so a reorder matches the previous batch even when the roster changes. We note the dye lot on every reorder so a top up reads as the same programme on the floor.
Do you deliver, and do you issue official receipts?
Orders ship nationwide through LBC, JRS, DHL, and FedEx, including island and provincial addresses. We are a PhilGEPS Platinum registered supplier and issue official invoices and BIR 2307, and we accept a purchase order or a resolution to award for government, LGU, and school buyers.
Request men's tank top pricing
Send the quantity, the shapes, the size breakdown, and the artwork. We reply with a mockup, a size run, and a lead time for each design.
Ready to build a men's tank top run?
Tell us the shape, the fabric weight, and who wears it, and we will confirm the build before anything is cut. Mockup, lab dip, and fit sample come first.