Fiber loop
Artistic Denim Mills Limited and the Philippines: Fiber to Garment, Investment Destination and Manufacturing Hub
Artistic Denim Mills has made denim in Korangi, Karachi since 1993, and now runs a closed loop of recycled cotton, 32 million pounds of yarn, 20 million metres of fabric and 8 million garments a year, on PKR 13.895 billion of revenue in the year to 30 June 2026, of which 87.2 percent was exported. It dyes at the fiber stage rather than after spinning, which almost nobody does at commercial scale. It has no plant in the Philippines. This page sets out the company record, the loop that runs from waste back to garment, the inputs the mill actually buys, the parts of that chain the islands can carry today, and what Philippine law offers a group that sells denim into the Americas, Europe and Asia.
M00 Company record
A Karachi Denim Mill That Sells Yarn to Its Own Competitors
Most mills in this series turn cotton into cloth and sell the cloth. This one sells recycled fiber, dyed yarn and denim fabric, and it sells them to other mills as well as to brands, which is the commercial consequence of dyeing before spinning. The year to 30 June 2026 was hard: sales fell by nearly a quarter and the company closed at a loss. That matters to a site selection file more than a good year would, because a group with no dividend and heavy finance cost is a group that looks at a lease before it looks at a building. These are the identity and result lines a due diligence pack opens with, each carrying its date and basis.
Identity, incorporation date, listing, ticker, board and registered office follow the Artistic Denim Mills Limited annual report for the year ended 30 June 2026 and the company corporate site, read in November 2026. Revenue, export share, operating profit, net loss, loss per share, dividend, capital spending and the quarter to 30 September 2026 are the audited annual figures and the unaudited first quarter figures published through the Pakistan Stock Exchange. The credit rating is the VIS Credit Rating Company assessment reaffirmed on 30 April 2025. Shareholding follows the pattern of shareholding note. Figures move at each quarter and each annual report.
M01 Closed loop
Waste Comes Back In, and Colour Goes In Earlier Than Anyone Else Puts It
Read the loop as a cost structure rather than a sustainability claim. Cotton waste re enters at stage one, so the mill buys less virgin lint per metre than a conventional composite. Colour enters at stage three, before the fiber is spun, which removes a wet dyeing step later in the chain and is why the company can sell dyed fiber and yarn as products in their own right. Water leaves the floor and comes back through the plant at stage five. The loop closes at stage six only because the garment unit sits under the same ownership, and that is exactly the stage a second country could carry.
Cotton recycling
Post industrial and post consumer waste becomes recycled fiber on site
Spinning
Recycled and virgin cotton drafted into yarn
Fiber dyeing
Colour applied before spinning, the FDCD platform
Indigo dyeing
Rope dyeing with liquid indigo and low effluent chemistry
Weaving and finishing
Greige to finished denim, laser and ozone rather than water
Garment
Cut, sew, wash and pack as the last stage in the same group
70%
Processed water recycled
In house treatment plant, company figure
20+
International certifications
Social, chemical and organic schemes, company figure
7,000kW
Captive solar generation
Solar generation installed at the Karachi floor. The year to 30 June 2026 carried PKR 303 million of capital spending weighted to solar capacity.
Recycled content, fiber dyeing position, water recycling at 70 percent of processed water, solar generation of 7,000 kilowatts and the certification count of more than twenty follow the company about page and the annual report for the year ended 30 June 2026, read in November 2026. The certification list includes GOTS, OEKO-TEX Standard 100, Cradle to Cradle Gold, GRS, RCS, OCS, BCI, WRAP, SEDEX, BSCI, Higg FEM and Higg FSLM. Gauge arcs are a reading aid scaled to the stated figure, not a measured share of plant capacity. Capital spending of PKR 303 million with a solar weighting follows the directors report for that year.
M02 Chronology
From a 1993 Start to Colour Applied at the Fiber
The useful record is the sequence of additions, because each one explains a capability that is still on the floor. Water recycling in 2005, recycling in 2015, certification at gold level in 2020, fiber dyeing in 2022 and colour denim at commercial scale in 2024. The last two are what separate this mill from the other Pakistani composites in this series.
- 1992
Incorporated on 18 May as a public limited company in Karachi, before a single metre of denim exists.
- 1993
Commercial operations begin. The company still dates its own history from this year rather than from incorporation.
- 2005
Solar generation starts and an in house water treatment plant begins returning processed water to the floor. Global expansion follows the same period.
- 2015
An in house cotton recycling facility opens, turning post industrial and post consumer waste into fiber the mill can spin.
- 2020
Cradle to Cradle Gold is achieved, alongside a certification file that passes twenty international schemes.
- 2022
Fiber dyeing is added, the step that turns the mill from a fabric seller into a supplier of dyed fiber, yarn and fabric to other mills as well.
- 2024
The FDCD fiber dyed colour denim platform is put into commercial scale production.
- 2025
VIS reaffirms the A minus and A2 entity rating with a stable outlook on 30 April.
- 2026
Revenue falls to PKR 13.895 billion after a key customer is lost and later resumes, and the fourth quarter turns a gross margin back above 10 percent.
Dates follow the company about page, the annual reports for the relevant years and the credit rating report read in November 2026. Incorporation on 18 May 1992 and the 1993 operations start both appear in the company record, and the difference is the gap between registration and a working floor. The 2022 fiber dyeing addition and the 2024 commercial scale colour denim entry follow the directors report and the company collections page. The 2025 rating date is the VIS reaffirmation of 30 April 2025.
M03 Footprint
Two Plots in Korangi, and a Showroom in Three Time Zones
Almost everything happens inside one industrial area of Karachi. The second plant is a short distance from the first, which is why the company reports one operating base rather than two businesses. The overseas addresses are selling and development space, not production, and that distinction matters when a site selection team asks what a second country would actually duplicate.
Korangi Industrial Area, Karachi
Head office, plant one
Plots 5 to 9 and 23 to 26 in Sector 16 carry the registered office and the main integrated floor: recycling, spinning, fiber dyeing, indigo dyeing, weaving, finishing and garment. This is the address on every invoice and every audit.
Landhi, Korangi, Karachi
Plant two
Plots 426 to 428 at Deh Phihai hold the second manufacturing facility. The company reports both sites as one operating base rather than two businesses.
New York, Bangladesh and Spain
Selling and development
Showrooms and offices that carry design collaboration and product development for the brands the mill supplies, rather than production. Nothing is manufactured at these addresses.
Philippines
No site
No factory, no office and no announced investment as of November 2026. Everything below is an assessment of what a Philippine site could carry, not a report of a decision the company has taken.
Plant addresses follow note 1.1 of the annual report for the year ended 30 June 2026, which names manufacturing facility one at Plots 5 to 9 and 23 to 26, Sector 16, Korangi Industrial Area, and manufacturing facility two at Plots 426 to 428, Deh Phihai, Landhi, Korangi. Selling offices in New York, Bangladesh and Spain follow the company corporate profile read in November 2026. The Philippine card reflects our own check of November 2026 and is not a statement from the company.
M04 Verdict lines
What This Mill Buys, and What the Islands Already Make
Ten inputs, each judged against the Philippine base as we find it in 2026. The verdict describes what exists today at export quality, not what could be built with enough capital. Read the whole column before deciding anything, because a plant is limited by its weakest input rather than its strongest, and for a denim mill the weakest input is the one this company makes better than almost anyone: the cloth itself.
Cotton lint
ImportThe Philippines does not grow cotton at commercial scale. A spinning floor here buys United States, Brazilian or Australian lint before the first cone is wound, which is the one cost the Karachi base removes by sitting inside a cotton region.
Recycled cotton fiber
ImportADM makes its own recycled fiber and sells surplus. A Philippine plant either imports that fiber or builds a recycling line, and a recycling line needs a steady waste stream that a new site does not yet have.
Fiber dyed and indigo dyed yarn
ImportDyed yarn at FDCD quality is the product this company is known for. It is not a Philippine input. A satellite plant starts by shipping in the very thing the parent makes best.
Denim fabric
ImportThere is no rope dyeing denim mill of export scale in the country. Any denim garment programme here begins with imported fabric, and the freight and duty on that roll sit inside the cost of the finished pair.
Denim garment cut and sew
AvailableThe deepest layer of the local base. Pattern rooms, technical auditing, wash plants and export grade sewing already run for international buyers, and a denim bottom programme can start on the month a lease is signed.
Laundry, laser and ozone finishing
PartlyGarment washing is widespread. Laser and ozone lines exist inside the larger export plants and in specialist laundries, but a programme that specifies waterless finishing on every style needs the line booked rather than assumed.
Pocketing, trims and hardware
PartlyLocal supply covers thread, labels, polybags and basic hardware. Rivets, burrs and specialty buttons at brand quality are usually imported, so a bill of materials carries a foreign line even when the sewing is local.
Retail packing and fulfilment
AvailablePick, pack, hangtag, polybag and carton preparation to a vendor standard is routine here, and third party logistics already runs direct to consumer for brands selling into the United States and Europe.
Bonded warehousing
AvailableA warehouse inside a registered zone can hold stock for ASEAN and Gulf accounts while the customs position is settled, which is often the cheapest way to test a market before committing to a building.
Wet processing at denim width
ImportIndigo dyeing, rope dyeing and denim finishing at twenty million metres a year is not a rented capability. It is a plant with an effluent treatment system, and it is the last thing a site selection team should fund, not the first.
Verdicts are our assessment of the Philippine industrial base in 2026, drawn from the sectors we already serve and from the supplier lists our customers work with. Import means no export scale capacity today, not a legal prohibition. Partly means the process exists but not at the width, the volume or the certification level a denim programme needs. Available means a buyer can place an order this quarter.
M05 Clearance run
Five Clearances Between a Korangi Decision and a Manila Bay Container
The sequence is not negotiable and the order matters. Each rung assumes the one before it, and the question that decides the whole run is asked at the first rung: does the Philippine business sell abroad, sell in local shops, or both. A denim garment plant that only exports is a different registration from one that also opens a store.
- 01
Securities and Exchange Commission
An export corporation can be wholly foreign owned, and the paid in capital floor in the Foreign Investments Act is aimed at enterprises selling into the domestic market. A group that only ships out needs a different answer from one that opens shops, so settle the selling model first.
- 02
Zone or investment board registration
The Philippine Economic Zone Authority registers a locator and issues the import permits, or the Board of Investments registers the activity under the current priority plan. A sewing floor and a bonded warehouse can sit inside one registration if the entitlement is drafted correctly at the start.
- 03
Bureau of Internal Revenue
Books, registration and the value added tax position of a registered export enterprise, including zero rating on qualifying local purchases, power, water and telecommunications. A retail store inside the country sits outside that line and carries its own treatment.
- 04
Customs and registered exporter status
Bureau of Customs accreditation for the importer of fabric, trims and machines, then registered exporter status so a consignment to the European Union can carry a statement on origin. Both files are audited, and the second one is what the duty relief actually depends on.
- 05
Labour and local permits
Department of Labor and Employment compliance for shift work, occupational safety and the plant safety committee, then the local government permits at the site, which is where water, power and road access are settled rather than negotiated afterwards.
Route described from the registration requirements in force in November 2026. Timelines are not quoted because they move with the agency, the zone and the completeness of the technical file. Confirm the current paid in capital floor, the retail treatment and the zone requirements with the investment promotion agency and counsel before committing capital.
M06 Statute ledger
Six Instruments That Price a Denim Plant
Incentives, ownership and duty access sit in six places. The first three decide what the plant pays at home, the last three decide what a container pays when it lands, and one of them decides whether a brand can sell through its own store. A denim programme touches all six, because it imports its cloth and exports its trousers.
Republic Act 12066, signed November 2024
CREATE MORE
A registered enterprise pays 20 percent corporate income tax on net taxable income from the registered activity against the 25 percent standard rate, holds an income tax holiday of four to seven years, and may elect 5 percent special corporate income tax on gross income. Confirm the tier with the investment promotion agency before modelling it.
Republic Act 11647, as amended
Foreign Investments Act
Export manufacturing sits outside the Foreign Investment Negative List, so a Pakistani parent can hold one hundred percent without a Philippine partner of record. A business that also sells through Philippine shops carries a paid in capital floor, so the selling model decides the ownership structure.
Republic Act 7916
Special Economic Zone Act
The Philippine Economic Zone Authority operates more than 400 zones with ready built shells, treated water, industrial power, bonded warehousing and single window permitting. Duty free import of capital equipment is the clause a garment plant cares about most, and it is also the clause that caps how much machinery a new site can bring in without cash.
Unilateral, reviewed on a cycle
European Union GSP Plus
Qualifying Philippine garments enter the 27 member states at zero customs duty when the consignment carries a registered exporter statement on origin. Europe is the destination that pays the denim business its hard currency, so the preference is worth modelling, and it is reviewed rather than guaranteed.
In force for the Philippines since 2023
RCEP and the ASEAN trade area
The Regional Comprehensive Economic Partnership and the ASEAN Trade in Goods Agreement give Philippine origin goods tariff relief across fifteen Asia Pacific economies. Cumulation rules reward regional sourcing, which matters to a mill that already buys fiber from several countries and sells into several more.
Republic Act 11981
Tatak Pinoy Act
Domestic preference in government procurement and a national development programme that names priority industries. Textiles and garments sit inside that list, which matters to uniform, school and institutional buyers even when a private brand order never touches it.
Statute references follow the text of Republic Act 12066, Republic Act 11647, Republic Act 7916 and Republic Act 11981 in force in November 2026, and the European Union GSP Plus regulation as currently applied. Rates, holiday periods and qualification rules are restated in summary form only. Model them with the investment promotion agency and a tax adviser before any commitment.
M07 Country ledger
Four Countries on the Seven Lines That Decide a Denim Plant
The Philippines is not the only alternative, and for a mill that already sells into the Americas and Europe it may not be the first one. The comparison that matters is against the bases a Pakistani denim group already uses, on the seven lines that decide where capacity goes next. Nothing here is a recommendation for a specific country; it is the frame a site file has to be argued inside.
| Dimension | Pakistan | Vietnam | Bangladesh | Philippines |
|---|---|---|---|---|
| Denim fabric capacity | About 20 million metres a year inside one listed company | Large and growing, export oriented | Large, concentrated in garment rather than fabric | No rope dyeing denim mill at export scale |
| Vertical reach | Recycling, spinning, dyeing, weaving, finishing and garment in one group | Spinning to garment, dyeing mostly bought in | Mostly garment and washing, fabric imported | Cut and sew, decoration and packing, fabric imported |
| Circular fiber | In house recycling from post industrial and post consumer waste | Recycled blends available, capacity smaller | Recycled cotton used, recycling base thin | No mechanical recycling at denim scale |
| European Union duty | GSP Plus, with a registered exporter statement | Free trade agreement in force since 2020 | Least developed country terms until graduation | GSP Plus, with a registered exporter statement |
| United States duty | Most favoured nation, standard rates | Most favoured nation, standard rates | Most favoured nation, some programmes suspended | Most favoured nation, no bilateral agreement |
| ASEAN and RCEP | Outside both | Inside both | Outside both | Inside both, RCEP in force since 2023 |
| Water and heat for wet processing | Captive power on site, gas tariff and wage pressure reported | Stable supply, rising cost | Gas pressure deficits reported | Water abundant, industrial power expensive |
Duty positions follow the preference regimes in force in November 2026 and describe the general position for qualifying textile and apparel goods, not any single tariff line. Labour depth and utility commentary reflect the industry reporting we read in the same month and are indicative. The four country frame is ours, chosen because those are the bases a Pakistani denim group and its competitors actually use.
M08 Honest limits
Six Things a Philippine Site Will Not Solve for ADM
Six things a site selection team should hear before the first deck. Each one is a reason a Philippine plant might not be built, and each one is better said now than discovered in year two. The first two are specific to this company's current position rather than to the country.
The product is fabric, and fabric is the one thing this country does not make
ADM earns its margin on twenty million metres of denim a year. A Philippine site cannot begin there, because there is no rope dyeing base to join and no recycled fiber stream to feed it. The honest first order is a garment programme on imported cloth, which means the site competes on labour, duty and lead time rather than on the thing the company is actually good at.
A mill in a loss year is not a mill with spare capital
The year to 30 June 2026 closed with a loss of PKR 435.8 million, finance cost of PKR 821.1 million and no dividend. Capital spending of PKR 303 million went to solar at home, not to a new country. A group in that position looks at a leased sewing floor and a bonded warehouse, not at a greenfield dye house.
The margin recovery is not clean
Gross profit rose while sales fell, and note 21.4 of the annual report discloses a one off non cash reversal of about PKR 1.1 billion of prior year provisions. That figure is close to the entire gross profit of the year, so the underlying conversion margin cannot be read off the reported line. Any capacity decision taken on the headline improvement is being taken on a number that has not been isolated.
Wet processing runs on heat, and heat is expensive here
Indigo ranges, stenters and denim finishing lines are thermal machines. Philippine industrial power costs more than the tariff at a Karachi industrial estate with captive generation beside it, and a dye house needs an effluent plant a sewing floor does not. Sewing, washing and packing come first because they carry the smallest heat load and the shortest permit path.
A brand audit is issued to a building, not to a group
The file behind GOTS, OEKO-TEX Standard 100, Cradle to Cradle Gold, GRS, RCS, BCI, SEDEX, BSCI, WRAP and the Higg modules belongs to Korangi. None of it transfers to a new address. A Philippine building starts its own social, chemical and wastewater audits, and twelve to twenty four months is the realistic range before a global brand will place volume.
Mindanao is cheaper and thinner at the same time
A site in Tagum City or Cagayan de Oro reaches the Pacific and sits inside a lower wage region, and the pool of denim technicians there is smaller than in Cavite or Laguna. The honest trade is a lower cost base against a longer training curve and a shorter list of nearby trims suppliers.
These limits are our analysis, not a finding of any study commissioned by the company. The loss, the finance cost, the nil dividend, the capital spending figure and the one off reversal of prior year provisions all follow the annual report for the year ended 30 June 2026, including note 21.4. Where no figure appears, the statement is qualitative on purpose, because the input is not published and a number would be invented.
M09 Commercial terms
Terms We Publish Before Anyone Books a Container
For the apparel and uniform programmes we run ourselves, published terms rather than a quotation form. A group evaluating a country needs to know what a first order costs and how long it takes before it commits to a building, and a denim bottom is the same arithmetic as any other sewn product once the cloth is landed.
Minimum order
50 pieces
Per design for production. Blank stock minimums depend on brand, colour and size mix.
Production lead time
3 to 6 weeks
After sample, artwork and payment approval. Ocean freight time is additional.
Published tee price
₱320.00
About $5.10, €4.45 or £3.85. The header currency switcher converts live and settles the cart in the chosen currency.
Payment
Bank transfer
Documentary collection or a letter of credit can be agreed for qualified larger orders.
Prices and lead times are ours and apply to orders we produce in Tagum City and Cagayan de Oro. They are not a quotation for another manufacturer and they do not describe the cost of building a plant. Conversions are indicative and the header currency switcher settles the cart at the live rate.
M10 Downstream layer
The Sewing Floor That Is Already Running Here
We are not describing a country in the abstract. The cut and sew, decoration and uniform capacity on this page is the capacity we operate, and a denim bottom programme is the most direct way for a mill of this shape to test the country without funding a wet floor.
- Cut and sew denim and twill bottoms, workwear, uniforms and promotional apparel on our own floor, from sample through to retail packing.
- Garment washing, laser and ozone finishing sourced through partner laundries, so a programme that specifies a wash still lands in one hand.
- Sublimation, screen print, direct to film, embroidery and heat transfer decoration for small runs and reorders.
- Pattern making, grading and technical packs produced in English, so a specification transfers from Karachi without translation.
- Export documentation, including the registered exporter statement that carries European duty relief on qualifying goods.
- Two production points, Tagum City in Davao del Norte and Cagayan de Oro in Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings.
A mill evaluating a second country would start by testing the layer that already works. That layer is cut and sew, washing and packing, and it is the reason a first order can be placed before any capital decision is taken. One pilot container of denim bottoms tells a site selection team more about labour, freight, wash quality and documentation than a feasibility study written from Karachi or Manila.
Our own production sits in Tagum City, Davao del Norte and Cagayan de Oro, Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings. We produce uniform, workwear and promotional apparel programmes in the volumes a factory, a zone or an institutional buyer actually orders, and we quote production, freight and the last leg separately so a landed cost can be compared with a South Asian or Vietnamese alternative on equal terms.
M11 Advisory
Artistic Denim Mills and the Philippines, Answered
The questions that arrive when a South Asian manufacturer, a Philippine zone or a procurement team opens this file for the first time, starting with the one that confuses two businesses that share a family name.
Does Artistic Denim Mills Limited have a plant or an office in the Philippines?
No, as of November 2026. The manufacturing base is at two addresses in Korangi, Karachi, with selling and development offices in New York, Bangladesh and Spain, and no Philippine factory, office or announced investment. This page is an independent analysis of what a Philippine site could carry for a company of that shape. It is not affiliated with, endorsed by or authorised by Artistic Denim Mills Limited.
Is Artistic Denim Mills the same company as Artistic Milliners?
No. They are separate businesses. Artistic Denim Mills Limited, ticker ADMM, is the listed company described on this page, incorporated in 1992 and reporting to the Pakistan Stock Exchange. Artistic Milliners is a privately held group founded from a retail store in 1949, and Artistic Garment Industries, known as AGI Denim, is a third business. Artistic Fabric Mills appears in ADM related party note by reason of common directorship. The Artistic family is connected, but the accounts, the boards and the factories are not interchangeable, and only the listed company numbers appear here.
What makes ADM different from the other Pakistani mills in this series?
Three things. It runs a closed loop rather than a line: recycled cotton goes back into spinning, so the mill buys less virgin fiber than a conventional denim composite. It dyes at the fiber stage through the FDCD platform, applying colour before spinning instead of after, which is a commercially rare position and the reason it sells dyed fiber and yarn to other mills. And it holds Cradle to Cradle Gold alongside more than twenty other schemes, which is a material compliance file rather than a marketing claim.
Why did revenue fall in the year to 30 June 2026?
Turnover fell 24.3 percent to PKR 13.895 billion from PKR 18.350 billion. The directors attribute the decline to subdued demand, pricing pressure in export markets, a relatively stable exchange rate that removed a past source of gains, and the temporary loss of a key customer, which the company says has since resumed. Gross margin still improved to 8.1 percent from 5.8 percent, though the year also carried a one off non cash reversal of prior year provisions that makes the underlying margin hard to isolate.
What could a Philippine plant actually make for ADM?
The reachable list is downstream and short. Denim bottoms and twill programmes cut and sewn on imported fabric, garment washing and finishing through partner laundries, decoration and embroidery, retail packing and online fulfilment, and a bonded warehouse for ASEAN and Gulf accounts. Spinning, fiber dyeing, indigo dyeing and denim weaving are possible in principle but start with imported machines, an effluent plant, a recycled fiber stream and a trained crew, which is a five year conversation rather than a first order.
Would a Philippine site help with the European market?
It can, and the mechanism is duty rather than distance. Philippine origin goods can enter the European Union at zero customs duty under GSP Plus when the consignment carries a registered exporter statement on origin. Europe is one of the three regions the company already sells into, so the preference is material. It is a unilateral scheme, reviewed on a cycle, so it belongs in the model as a risk as well as a benefit.
Which incentives would a denim garment operation register under?
CREATE MORE, Republic Act 12066, gives a registered business enterprise 20 percent corporate income tax, an income tax holiday of four to seven years, and an election of 5 percent special corporate income tax on gross income for an export enterprise. Export manufacturing can be wholly foreign owned under the Foreign Investments Act. The Philippine Economic Zone Authority adds zone registration, bonded warehousing, duty free capital equipment and single window permitting. Confirm the current rules with the investment promotion agency before modelling them.
How long does a brand vendor qualification take?
Twelve to twenty four months is the realistic range for a new garment or textile site serving a global brand. Social audits, chemical management, wastewater testing, factory environmental modules and a first production run all sit on the critical path. A group that already holds those approvals in Pakistan still has to qualify the new building, because the audit is issued to a site and not to a company.
What are your own minimum order, lead time and price for apparel?
Production starts at 50 pieces per design. Lead time is 3 to 6 weeks after sample, artwork and payment approval, with freight additional. The published tee price is ₱320.00, about $5.10, €4.45 or £3.85, and the header currency switcher converts live at checkout. We quote from Tagum City and Cagayan de Oro, and we separate production, freight and the last leg so a landed cost can be compared with a South Asian or Vietnamese alternative on equal terms.
M12 Direct enquiry
Send the Specification to Our South Asia Desk
Send the specification, the monthly volume, the destination port and the date you need the goods on site. We will come back with a costed plan that separates production, freight and the last leg, so you can see which line moves when the peso or the sailing schedule does. Our offices are open Mon to Sat, 8:30 AM to 5:00 PM.
Sources and scope: company identity, incorporation on 18 May 1992, listing on the Pakistan Stock Exchange as ADMM, share capital, board, registered office and both manufacturing addresses follow the Artistic Denim Mills Limited annual report for the year ended 30 June 2026, including note 1, note 1.1 and the pattern of shareholding, all read in November 2026. Revenue of PKR 13.895 billion, export sales of PKR 12.299 billion, operating profit of PKR 530.3 million, the net loss of PKR 435.8 million, loss per share of PKR 5.19, the nil dividend, finance cost of PKR 821.1 million and capital spending of PKR 303 million are the audited figures for that financial year. The quarter to 30 September 2026, being revenue of PKR 4.105 billion and a net profit of PKR 1.245 million, is the unaudited first quarter of the following year. The one off non cash reversal of prior year provisions follows note 21.4 of the same report. Production capacity of 32 million pounds of yarn, 20 million metres of fabric and 8 million garments a year follows the directors report for that year. Recycled fiber capability, fiber dyeing, the FDCD colour denim platform, water recycling at 70 percent, solar generation of 7,000 kilowatts, laser and ozone finishing, liquid indigo dyeing and the certification list follow the company about page, the company collections page and the annual report, read in the same month. The credit rating of A minus long term and A2 short term follows the VIS Credit Rating Company report reaffirmed on 30 April 2025. Offices in New York, Bangladesh and Spain follow the company corporate profile. Philippine supply positions, zone commentary, rents, wages, power tariffs, water charges, transit times and qualification periods reflect the market as we find in 2026 and are our assessment; they must be confirmed with the zone, the utility, the carrier, the certification body and the counterparty before commitment. Incentive terms follow CREATE MORE, Republic Act 12066, the amended Foreign Investments Act, Republic Act 11647, the Special Economic Zone Act, Republic Act 7916, and the Tatak Pinoy Act, Republic Act 11981. Trade terms follow the European Union Generalized Scheme of Preferences Plus and the registered exporter system, the Regional Comprehensive Economic Partnership and the ASEAN Trade in Goods Agreement. This page is an independent market analysis. It is not affiliated with, endorsed by or authorised by Artistic Denim Mills Limited, and it does not describe any announced office, plant, subsidiary or investment of that company in the Philippines.
