Skip to content

Company dossier, November 2026

Sapphire Textile Mills and the Philippines: Integrated Textiles, Investment Destination and Manufacturing Hub

Sapphire spins, weaves, dyes, prints, stitches and sells its own brand from Pakistan, and it has just shrunk the least profitable part of that chain. The Philippines cannot host its spinning. It can host the finishing, making up and retail sourcing layers that come after it, inside ASEAN, with English documentation and zero duty into the European Union on qualifying goods.

Independent analysis by RB Advertising. Sapphire Textile Mills has no Philippine plant, office or announced investment as of November 2026, and has not endorsed this page.

1969 Founded Karachi, Pakistan
139,433 Spindles Company figure
360 Looms Company figure
12 Subsidiaries Nine wholly owned
35 MW Solar Year to June 2026
0 Philippine sites As of November 2026

Company record

Station 01

A Karachi Spinner That Learned to Sell Its Own Cloth

Sapphire Textile Mills was incorporated in 1969 and listed on the Pakistan Stock Exchange, where it trades as SAPT. Five decades later the company is one of Pakistan's largest integrated textile groups, with spinning in Sindh and Punjab, finishing and stitching in Sheikhupura, a retail chain of its own, and power subsidiaries that supply the mills. The record below is the company file, not the investment case.

Legal name
Sapphire Textile Mills Limited, commonly STML
Incorporated
11 March 1969, as a public limited company in Pakistan
Listed
Pakistan Stock Exchange, ticker SAPT
Group
Sapphire Group, with textile, power, retail and dairy businesses
Chairman
Mian Mohammad Abdullah
Chief executive
Nadeem Abdullah
Registered office
212 Cotton Exchange Building, I. I. Chundrigar Road, Karachi
Manufacturing chain
Spinning, weaving, yarn dyeing, processing, printing, home textile and stitching
Divisions
Seven, from spinning through to retail and renewable power
Subsidiaries
Twelve, of which nine are wholly owned
Net turnover, year to 30 June 2026
PKR 81.181 billion, down 12.95 percent from PKR 93.259 billion
Gross profit, same year
PKR 10.290 billion, a gross margin of 12.68 percent against 13.65 percent
Profit after tax, same year
PKR 6.821 billion against PKR 3.951 billion, with earnings per share of PKR 314.46
Other income, same year
PKR 7.483 billion, mainly dividend income, against PKR 3.434 billion
Consolidated revenue, same year
About PKR 146.3 billion, with profit after tax of about PKR 13.3 billion
Total assets, 30 June 2026
PKR 109.794 billion, with shareholders equity of PKR 53.171 billion

Division map

Station 02

Seven Divisions Strung on One Continuous Thread

Most Pakistani textile companies sell yarn or greige cloth and stop there. Sapphire carries the fibre through to a finished retail product, and the same ownership also runs the power and water infrastructure underneath it. Read the chain from left to right and the investment question changes: the value is not in the first two stations, it is in the last four.

Spinning 139,433 spindles

Ring and rotor spinning across Sindh and Punjab, with 3,120 rotors alongside the spindles, and a capacity of about 140 million pounds a year converted to a 20/s count. The unit ran at 97 percent in the year to June 2025.

Weaving 360 looms

Greige cloth for the group own finishing floor and for external customers, at a capacity of about 206 million square metres a year measured at 50 picks per inch. Utilisation was 85 percent in the year to June 2025.

Processing and printing 70 million metres

Desizing, bleaching, mercerising, dyeing, rotary printing, digital printing and the stenters that set the hand of the cloth. The floor ran at 92 percent of its 70 million metre capacity in the year to June 2025.

Yarn dyeing 2.9 million kilograms

Package dyeing on eight Thies vessels with loads from ten kilograms to one thousand kilograms, for cotton in reactive and vat dyes and polyester in disperse dyes. Utilisation was 77 percent in the year to June 2025.

Home textile and stitching 215 stitching machines

Cutting, stitching, quilting, embroidery, garment washing and packing, with the stitching unit certified LEED Platinum. The capacity of this floor is not stated as a single number because the product mix sets the run length.

Retail and power 51 outlets, 200 MW wind

The Sapphire retail chain sells the group own product into the domestic market, and the power subsidiaries run wind, solar and storage assets that cut the cost of the mills. Retail operated 51 outlets at the 2025 annual report.

The ownership detail that matters to a site decision. The group does not rent its competitive advantage. Spinning, weaving, processing, stitching, retail and the power that drives all four sit inside the same balance sheet. A Philippine plant that only stitches would buy fabric at arm's length, which is a different business from the one Sapphire runs at home.

Financial path

Station 03

Turnover Fell in 2026 While Profit Rose, and Both Are True

Sales rose for four straight years, peaked at PKR 93.259 billion in the year to June 2025, then fell 12.95 percent to PKR 81.181 billion. Profit after tax moved the other way, from PKR 3.951 billion to PKR 6.821 billion, because dividend income and a lower finance cost did the work that operations did not. The distinction matters to anyone reading the group as a manufacturer.

Gross margin, FY2026

12.68%

Down from 13.65 percent in FY2025, on a gross profit of PKR 10.290 billion

Earnings per share, FY2026

PKR 314.46

Against PKR 182.16 in FY2025, helped by dividend income and a lower finance cost

Consolidated revenue, FY2026

PKR 146.3bn

Group figure, with profit after tax of about PKR 13.3 billion

Machine load

Station 04

What the Machines Actually Run At

Utilisation tells you where a mill has room and where it does not. Sapphire ran its spinning floor at 97 percent and its finishing and printing floor at 92 percent in the year to June 2025, which means the value added end was close to full while the commodity end was the part that later came under the knife. A Philippine site built to feed that finishing floor would be competing for capacity that already exists.

Spinning

97%

140 million pounds a year, converted to a 20/s count

Weaving

85%

206 million square metres at 50 picks per inch

Finishing and printing

92%

70 million linear metres a year

Yarn dyeing

77%

2.9 million kilograms a year

Capacity is not the same as capability. The spinning numbers are large, but the strategic move is the other way. The group is reducing spindles and putting capital into the finishing, stitching and retail layers where the margin sits. A Philippine partner that can carry those layers, rather than the yarn, is the one that fits the direction the company is already travelling.

Footprint

Station 05

Five Sites in Sindh and Punjab, and a Sixth That Does Not Exist

The manufacturing base runs from Kotri and Nooriabad in Sindh to Chunian, Sheikhupura and Lahore in Punjab. The overseas footprint is commercial, not industrial: a Danish trading company, retail stores in the United Kingdom and the United Arab Emirates, and a United States retail corporation. Nothing in the Philippine column exists yet.

Sindh

Kotri, SITE Area

Spinning unit at A-17 SITE, Kotri. This is the site where production from uneconomic spindles was discontinued in the year to June 2026, part of the shift away from commodity yarn.

Sindh

Nooriabad, SITE Area

Spinning unit at A-84 SITE Area, Nooriabad, feeding the group weaving and processing floors from a second Sindh location.

Punjab

Chunian, Kasur District

Spinning unit at 63/64 kilometre Multan Road, Jumber Khurd, Chunian, in the Kasur belt south of Lahore.

Punjab

Feroze Wattwan, Sheikhupura

Spinning at 1.5 kilometre Warburton Road, plus the weaving, yarn dyeing, printing and processing, and home textile and stitching units at 2 kilometre Warburton Road.

Punjab

Raiwind Road, Lahore

Stitching unit at 1.5 kilometre off Defence Road, Bhubtian Chowk, Raiwind Road, Lahore, serving the home textile and apparel programmes.

Sindh

Karachi head office

Registered office at 212 Cotton Exchange Building on I. I. Chundrigar Road, where the listed company, the treasury and the export function sit.

Overseas

Denmark, the United Kingdom, the United Arab Emirates and the United States

Sapphire International ApS in Denmark, retail stores in Bradford and Birmingham, a store in Sharjah, and Sapphire Retail US Corporation for the American market.

Gap

The Philippines

No plant, no office, no sourcing arm and no announced investment as of November 2026. This page is an independent analysis, not a company announcement.

Textile and retail

  • Sapphire Retail Limited, 100 percent
  • DesignTex SMC Private Limited, under the retail arm
  • Sapphire International ApS, Denmark

Power

  • Sapphire Wind Power Company Limited, 70 percent, 52.8 MW at Jhimpir
  • Triconboston Consulting Corporation, 57.125 percent, three 50 MW projects at Jhimpir
  • Sapphire Green Energy Private Limited, 100 percent

Property and materials

  • Sapphire Real Estate Private Limited, 100 percent
  • Creek Properties Private Limited, 65 percent
  • Sapphire Chemicals Private Limited, 100 percent, with a planned soda ash plant of 220,000 tonnes a year

Retail abroad

  • Sapphire Retail International Limited, United Kingdom
  • Sapphire Retail Trading One Person Company LLC, United Arab Emirates
  • Sapphire Retail US Corporation, United States

Power and water

Station 06

Wind, Sun, Biomass and the Water That Comes Back

An integrated textile group is an energy company with a textile attached. Sapphire runs 35 MW of solar and 25 MWh of battery storage at the mills, holds 200 MW of wind through subsidiaries, meets 98 percent of its steam demand with biomass, and recycles 40 percent of its process water. That stack is the part of the model the Philippines can copy most directly, and the part that decides whether a wet floor is competitive.

35 MW

Solar at the mills

Installed across the manufacturing sites, with a 25 MWh battery storage system alongside it, per the 2026 annual report.

200 MW

Wind through subsidiaries

A 52.8 MW farm at Jhimpir in commercial operation since November 2015, plus three 50 MW projects that started in September 2018.

98%

Steam from biomass

The share of steam demand met by biomass boilers burning rice husk, corn cob, wood residue and bagasse, per the 2026 report.

40%

Process water recycled

Water recovered and returned to production, with the effluent plant being expanded from 150 to 400 cubic metres an hour.

LEED

Platinum stitching unit

The stitching unit holds LEED Platinum, with a stated 25 percent energy saving and 30 percent lower water use against a baseline building.

30 MW

Site power demand

Approximate load across the mills, met mainly from the grid with solar and biomass on top, and a stated plan to add 2 to 3 MW of solar with storage.

  • ISO 9001
  • ISO 14001
  • SA 8000
  • Sedex SMETA
  • OEKO TEX Standard 100
  • OEKO TEX STeP
  • OEKO TEX Made in Green
  • GOTS GOTS-26331
  • Organic Content Standard
  • ZDHC Supplier to Zero
  • Higg FEM
  • Better Cotton
  • SBTi 1.5 degrees
  • Net Zero Pakistan

Site fit

Station 07

Where a Philippine Site Would Sit in Sapphire's Chain

The Philippine base is not a smaller Pakistan. It has no cotton, thin spinning and limited wide width finishing, but it has export grade cut and sew, English technical documentation, a working economic zone system and a consumer market that responds to mall retail. The table below marks each input by what a site here could actually do with it.

Cotton fibre

Import

The Philippines does not grow cotton at commercial scale, so lint arrives from the United States, Brazil, Australia or West Africa. A Philippine spinning or weaving plant starts one freight leg behind a Punjab mill.

Cotton yarn

Import

Spinning at the scale Sapphire runs is not present. Yarn would come from Pakistan, India, Vietnam or Turkey, and the group would give up the margin it captures inside its own spinning floor.

Greige woven fabric

Partner

Weaving exists for industrial, technical and some apparel fabric, and the Cavite and Laguna belt has mills with real looms. Wide width home textile quality at retail volume is still bought from outside.

Yarn dyeing

Partner

Commission package dyehouses serve garment exporters and can take sampling and short runs. The eight vessel configuration Sapphire runs at home, with loads up to one thousand kilograms, is a build rather than a rental.

Dyeing, printing and finishing

Partner

Commission printers and finishers handle garment programmes and sampling. Wide width printing, repeatability across a long run and the stenter finishing a bed linen programme needs are the parts that would be built.

Home textile making up

Available

Cut and sew for bedding, table linen and cushions exists and can be expanded quickly. Terry weaving, wide width printing and the packing standard a hotel or retail programme expects are not in place at that scale.

Cut and sew apparel

Available

The deepest layer of the Philippine base, with export quality sewing, technical auditing, pattern rooms and English documentation. It is also the layer that pairs with the group retail sourcing model.

Retail sourcing office

Available

A buying, quality and vendor management office can be stood up in Manila or Cebu with local staff, English contracts and a mall and institutional market to test ranges before a plant is committed.

Solar and battery storage

Available

Irradiation runs about 5.0 to 5.5 kilowatt hours per square metre a day, which makes rooftop solar and storage economic. The group has already built 35 MW of solar and 25 MWh of storage at home.

Technical and compliance files

Available

Specifications, test reports, audit packs and customs documents are produced in English as a matter of course, so a technical file transfers from Karachi to Manila without a translation step.

Available: a site can run it here today Partner: present but not at the required depth Import: arrives by sea, and stays in the cost

Clearances

Station 08

Five Clearances Between a Site Visit and a First Export

A Philippine plant is not approved by one agency. It is assembled from five clearances, each with its own document set and its own clock. The sequence below is the order a site team usually runs it, and the last two are where most timelines slip.

Gate 01 Securities and Exchange Commission

An export corporation can be wholly foreign owned, and the paid in capital floor in the Foreign Investments Act is aimed at domestic market enterprises. Ownership is set by statute rather than by a nominee arrangement.

Gate 02 Economic zone or investment board

The Philippine Economic Zone Authority registers a locator and issues the import permits, or the Board of Investments registers the activity under the priority plan. Either route carries the fiscal package described below.

Gate 03 Bureau of Internal Revenue

Books, registration and the value added tax position of a registered export enterprise, including zero rating on qualifying local purchases, power, water and telecommunications.

Gate 04 Customs and exporter status

Accreditation for the importer of looms, dye vessels and print ranges, then registered exporter status so each consignment to the European Union can carry a statement on origin.

Gate 05 Labour and local permits

Department of Labor and Employment compliance for shift work, chemical safety and the plant level safety committee, then the local government permits at the site, which is where water, power and road access are settled.

Instruments

Station 09

The Statute and Preference Stack, Priced In

Six instruments decide the arithmetic of a Philippine plant. Two set the tax rate, one sets ownership, one sets the zone package, and two set the duty a buyer pays at the other end. None of them is permanent, and each should be checked against the regulation in force on the day a container ships.

Republic Act 12066, signed November 2024 CREATE MORE

A registered enterprise pays 20 percent corporate income tax on net taxable income from the registered activity against the 25 percent standard rate, holds an income tax holiday of four to seven years, and may elect 5 percent special corporate income tax on gross income. Confirm the tier with the investment promotion agency before modelling it.

Republic Act 11647, as amended Foreign Investments Act

Export manufacturing sits outside the Foreign Investment Negative List, so a Pakistani parent can hold one hundred percent without a Philippine partner of record. A business that sells to the domestic market faces a minimum paid in capital floor that the Act sets and the agency applies.

Republic Act 7916 Special Economic Zone Act

The Philippine Economic Zone Authority operates more than 400 zones with ready built shells, treated water, industrial power, bonded warehousing and single window permitting. Duty free import of capital equipment is the clause a dye house or a stitching plant cares about most.

Unilateral, reviewed on a cycle European Union GSP Plus

Qualifying Philippine textiles and garments enter the 27 member states at zero customs duty when the consignment carries a registered exporter statement on origin. It is a preference, not a treaty: it is reviewed, it can be suspended, and it must be checked against the regulation in force at shipment.

In force for the Philippines since 2023 RCEP and the ASEAN trade area

The Regional Comprehensive Economic Partnership and the ASEAN Trade in Goods Agreement give Philippine origin goods tariff relief across fifteen Asia Pacific economies, with cumulation rules that reward regional sourcing rather than a single country supply chain.

Republic Act 11981 Tatak Pinoy Act

Domestic preference in government procurement and a national development programme that names priority industries. Textiles sit inside that list, which matters to uniform, hospital and institutional buyers even when a private brand order does not touch it.

Four country ledger

Station 10

Four Sourcing Countries, One Column That Changes

Pakistan, Vietnam, Bangladesh and the Philippines are not interchangeable, and a table makes that plain. Read down the Philippine column and the pattern is consistent: weak on the fibre and the wide loom, strong on the sewing floor, the zone system and the documentation. That is the column a site decision should be built from.

Qualitative comparison for a vertically integrated textile investor, read in November 2026. Duty positions are the general regime and must be confirmed against the tariff line at shipment.
DimensionPakistanVietnamBangladeshPhilippines
Yarn and fabric depthSpinning, weaving, dyeing, printing and stitching inside one listed companyGarment depth is strong, yarn and wide woven fabric thinnerKnit fabric is strong, woven and home textile thinnerCut and sew is strong, spinning and wide woven fabric thin
European Union dutyGSP Plus, with a registered exporter statementFree trade agreement in force since 2020Least developed country terms, with a transition after graduationGSP Plus, with a registered exporter statement
United States dutyMost favoured nation, standard ratesMost favoured nation, standard ratesMost favoured nation, some programmes suspendedMost favoured nation, no bilateral agreement
ASEAN and RCEPOutside bothInside bothOutside bothInside both, with RCEP in force since 2023
Power and water for a wet floorGrid and gas constraints reported by the industry, partly offset by captive plantsStable supply, rising costGas pressure deficits reportedWater abundant, industrial power expensive
Economic zone accessExport processing zones in placeIndustrial parks and export processing enterprisesExport processing zones and economic zonesMore than 400 zones under one agency
Domestic retail marketLarge, and the base of the Sapphire retail chainLarge and growingLarge, price ledSmaller, urban and mall led, with a strong uniform and institutional layer

Fault lines

Station 11

Six Things a Philippine Plant Would Not Fix

A good site case names what it cannot solve before it names what it can. These are the six arguments we would put against our own proposal, and each one has to be answered with a product decision rather than a slogan.

01 The Philippines would not replace the spinning Sapphire is reducing at home

The Kotri rationalisation closed uneconomic spindles because commodity yarn does not pay at current energy and cotton costs. Rebuilding spinning capacity in a country that imports both the fibre and most of its power would repeat the problem, not solve it.

02 Cotton and yarn arrive by sea, and that lands in the cost

A Philippine mill that spins or weaves starts with imported lint or imported yarn, pays freight and port charges, and then competes with a Punjabi mill that buys cotton in its own province. The gap has to be closed by product mix, not by hope.

03 Wet processing is a thermal load before it is a labour load

Dyeing, printing and finishing consume steam, water and chemistry. The Philippines has water and a strong solar resource, but industrial power is expensive, and a dye house competes on energy as much as on wages.

04 Retail depth is thinner than the home market

The Sapphire chain runs on a large domestic market with a dense mall footprint. The Philippine market is smaller and more fragmented, so a retail led entry would begin with a few stores and a wholesale channel, not a national roll out.

05 Preference regimes change while a plant is being paid for

GSP Plus is unilateral and reviewed on a cycle, and least developed country terms are scheduled to change. A site decision cannot rest on a duty rate alone, because the rate can move before the building is complete.

06 Mindanao is cheaper and thinner at the same time

A site in Tagum City or Cagayan de Oro reaches the Pacific, sits inside a lower wage region and is close to the water a wet floor needs. The pool of dye house and finishing technicians there is smaller than in Cavite or Laguna, so the trade is a lower cost base against a longer training curve.

Commercial terms

Station 12

Terms We Publish Before a Site Is Discussed

A site decision can wait. A purchase order cannot. These are the terms our own floor works to, so a buyer can price the downstream layer while the investment case is still being written.

Minimum order

50 pieces

Per design for production. Blank stock minimums depend on brand, colour and size mix.

Production lead time

3 to 6 weeks

After sample, artwork and payment approval. Ocean freight time is additional.

Published tee price

₱320.00

About $5.10, €4.45 or £3.85. The header currency switcher converts live and settles the cart in the chosen currency.

Payment

Bank transfer

Documentary collection or a letter of credit can be agreed for qualified larger orders.

Downstream layer

Station 13

The Cutting Room We Already Operate in Mindanao

We are not asking Sapphire to imagine a Philippine supply chain. We run one end of it. Our own floor takes a technical pack, cuts and sews the garment, decorates it, packs it to a retail standard and documents the export. That is the layer a group like Sapphire would need first, whether it builds, partners or sources.

  • Cut and sew knitwear, woven tops, trousers and uniforms on our own floor, from sample through to retail packing.
  • Sublimation, screen print, direct to film, embroidery and heat transfer decoration for small runs and reorders.
  • Workwear, industrial uniforms and protective apparel for plant crews, zone neighbours and institutional buyers.
  • Pattern making, grading and technical packs produced in English, so a specification transfers without translation.
  • Export documentation, including the registered exporter statement that carries European duty relief on qualifying goods.
  • Two production points, Tagum City in Davao del Norte and Cagayan de Oro in Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings.

Questions

Station 14

Sapphire Textile Mills and the Philippines, Answered

The eight questions a buyer, a site team or a journalist asks first, answered with the period and the basis attached.

Does Sapphire Textile Mills have a plant or an office in the Philippines?

No, as of November 2026. The manufacturing base is in Sindh and Punjab, with a registered office in Karachi, a Danish subsidiary, retail stores in the United Kingdom and the United Arab Emirates, and no Philippine factory, office, sourcing arm or announced investment. This page is an independent analysis of what a Philippine site could carry for a company of that shape. It is not affiliated with, endorsed by or authorised by Sapphire Textile Mills Limited.

Why is Sapphire reducing spinning capacity in Pakistan?

The company discontinued production from uneconomic spindles at its Kotri unit during the year to 30 June 2026, described by the rating agency as a rationalisation in line with a shift toward value added segments. Net turnover fell 12.95 percent to PKR 81.181 billion, while profit after tax rose to PKR 6.821 billion on higher dividend income and a lower finance cost. The lesson for a Philippine site is that commodity spinning is the wrong first move, and finishing, making up and retail sourcing are the right ones.

Is there a free trade agreement between Pakistan and the Philippines?

No. Both are World Trade Organization members and trade on most favoured nation terms. The Philippines sits inside ASEAN and the Regional Comprehensive Economic Partnership, and holds European Union GSP Plus status. Pakistan holds GSP Plus with the European Union as well but is outside ASEAN and RCEP. Confirm the exact tariff line with a licensed customs broker before pricing a container in either direction.

What could a Philippine site actually make for Sapphire?

The reachable list is downstream. Home textile making up, retail ready packing, decoration and embroidery, apparel sourcing for the Sapphire chain, and fabric finishing on imported greige. Printing is possible but starts with imported screens, imported chemistry, a water treatment plant and a trained colour team. Cotton spinning is not a credible first move, because the fibre and the scale are not here.

What does the Philippines not have for an integrated textile group?

Cotton growing, spinning at export scale, wide width print and finishing, terry weaving, a deep pool of dye house technicians, and a domestic retail market of the size the Sapphire chain serves in Pakistan. It does have cut and sew depth, decoration capacity, packaging, English documentation, more than 400 economic zones, and zero duty access to the European Union on qualifying goods.

Which incentives would a textile plant register under?

CREATE MORE, Republic Act 12066, gives a registered business enterprise 20 percent corporate income tax, an income tax holiday of four to seven years, and an election of 5 percent special corporate income tax on gross income for an export enterprise. Export manufacturing can be wholly foreign owned under the Foreign Investments Act. The Philippine Economic Zone Authority adds zone registration, bonded warehousing, duty free capital equipment and single window permitting. Confirm the current rules with the investment promotion agency before modelling them.

How long does brand vendor qualification take?

A retail brand or a hotel group usually runs a technical audit, a social compliance audit and a trial order before it qualifies a plant. For a new site, plan on twelve to twenty four months from the first audit to a steady programme, with the trial order in the middle. A site that already holds GOTS, OEKO TEX, Sedex and ISO certification, as Sapphire does at home, shortens the document review but does not remove the site audit.

What are your own minimum order, lead time and price for apparel?

Production starts at 50 pieces per design. Lead time is 3 to 6 weeks after sample, artwork and payment approval, with freight additional. The published tee price is ₱320.00, about $5.10, €4.45 or £3.85, and the header currency switcher converts live at checkout. We quote from Tagum City and Cagayan de Oro, and we separate production, freight and the last leg so a landed cost can be compared with a domestic or South Asian alternative on equal terms.

Direct enquiry

Station 15

Book a Call With the Tagum City Trade Desk

Send the specification, the monthly volume, the destination port and the date you need the goods on site. We will come back with a costed plan that separates production, freight and the last leg, so you can see which line moves when the peso or the sailing schedule does. Our offices are open Mon to Sat, 8:30 AM to 5:00 PM.

Sources and scope: legal name, incorporation date, listing venue, group membership, chairman, chief executive, registered office, manufacturing locations, division list, subsidiary list and ownership percentages, installed spindle, rotor, loom and stitching machine counts, and the capacity utilisation series follow the Sapphire Textile Mills Limited corporate pages and annual reports read in November 2026, including the annual report for the year ended 30 June 2026 and the annual report for the year ended 30 June 2025. Net turnover, gross profit, profit after tax, other income, earnings per share, total assets, shareholders equity and the six year sales series are the audited standalone figures for the years ended 30 June 2021 to 30 June 2026 as published in the company financial highlights. Consolidated revenue and consolidated profit after tax are group figures for the year ended 30 June 2026. The discontinuation of uneconomic spindles at Kotri, the export to local sales mix, the product mix, the European share of sales, capacity utilisation and the site power demand follow the VIS Credit Rating Company rating report and the rating press release reaffirming the A plus and A1 ratings on 3 November 2026. Solar capacity, battery storage, wind capacity, biomass steam share, water recycling, effluent treatment expansion, LEED Platinum certification and the certification list follow the company sustainability pages and the sustainability section of the 2026 annual report. Philippine supply positions, zone commentary, rents, wages, power tariffs, water charges, transit times and qualification periods reflect the market as we find it in 2026 and are our assessment; they must be confirmed with the zone, the utility, the carrier, the certification body and the counterparty before commitment. Incentive terms follow CREATE MORE, Republic Act 12066, the amended Foreign Investments Act, Republic Act 11647, the Special Economic Zone Act, Republic Act 7916, and the Tatak Pinoy Act, Republic Act 11981. Trade terms follow the European Union Generalized Scheme of Preferences Plus and the registered exporter system, the Regional Comprehensive Economic Partnership, the ASEAN Trade in Goods Agreement and the least developed country graduation schedule for Bangladesh. This page is an independent market analysis. It is not affiliated with, endorsed by or authorised by Sapphire Textile Mills Limited, and it does not describe any announced Sapphire office, plant, subsidiary or investment in the Philippines.