Skip to content

Print archive

Gul Ahmed Textile Mills and the Philippines: Printed Fabrics, Investment Destination and Manufacturing Hub

Gul Ahmed has spun, woven, printed and stitched in Karachi since 1953, runs 51,840 spindles and 300 weaving machines, treats its whole effluent stream, and sells through 40 IDEAS stores plus companies in the United Arab Emirates, the United Kingdom and the United States. In the year to 30 June 2026 it reported sales of PKR 131.090 billion and a net loss of PKR 922.6 million, and on 29 September 2026 its board closed the export apparel segment. It has no plant in the Philippines. This page sets out the company record, the print floor, the five year ledger, what the exit actually means, and what Philippine law and the Philippine base offer a group that prints fabric and sells home textile.

Independent analysis. No Philippine site has been announced.

  • 1953 Founded Karachi
  • 1970 Listed PSX, GATM
  • 51,840 Spindles Installed capacity
  • 300 Weaving machines Company figure
  • 40 IDEAS stores Across Pakistan
  • 0 Philippine sites No plant, no office
PKR 131.09bn Sales, FY2026 Year to 30 June 2026, standalone
PKR 9.57bn Gross profit Same year, a 7.30 percent margin
PKR 922.6m Net loss Same year, standalone company
20 MW Solar commissioned With 6.8 MWh of battery, by March 2026

P00 Company record

A Karachi Trading Family That Built a Print Mill, Then a Retail Chain

The group began trading in textiles in the early 1900s, entered manufacturing in 1953 under the Gul Ahmed name, and listed on the Karachi Stock Exchange in 1970. The company now describes a chain that runs from cotton yarn to finished product, with design, processing and stitching inside the same ownership. These are the identity lines a supplier file or a due diligence pack opens with, each carrying its date and basis.

Legal name Gul Ahmed Textile Mills Limited
Founded 1953, at Landhi Industrial Area, Karachi
Listed Pakistan Stock Exchange, 1970, ticker GATM
Chairman Mohomed Bashir
Chief executive Mohammed Zaki Bashir
Vice chairman Zain Bashir
Registered office Plot H-7, Landhi Industrial Area, Karachi, Pakistan
Registration CUIN 000586, national tax number 0698283-2
Manufacturing chain Spinning, weaving, processing, design and stitching under one company
Retail IDEAS by Gul Ahmed, launched 2003, 40 stores across Pakistan
Subsidiaries Ideas (Private) Limited, Gul Ahmed International (FZC) in the United Arab Emirates, GTM Europe Limited in the United Kingdom, GTM USA Corp and Sky Home Corp in the United States
Sales, year to 30 June 2026 PKR 131.090 billion, down from PKR 157.905 billion
Gross profit, same year PKR 9.572 billion, a gross margin of 7.30 percent
Net result, same year A loss after tax of PKR 922.6 million, loss per share PKR 1.24
Consolidated group, same year Revenue of about PKR 162 billion and a net loss of about PKR 339 million

Identity, founding year, listing year, chairman, chief executive, vice chairman, registered office, registration number, subsidiaries, retail store count and manufacturing description follow the company corporate pages, read in November 2026. Sales, gross profit, loss after tax and loss per share are the audited standalone figures for the year ended 30 June 2026 as published in the company financial highlights. The consolidated revenue and consolidated loss are the group figures reported for the same year. Figures move at each half year and each annual report.

P01 Print floor

Six Stages, and the One That Decides the Business

Read the floor as a sequence rather than a list. Cotton enters as fibre, leaves as yarn, becomes greige cloth on the looms, takes colour on the print ranges, and exits as bed linen, table linen, a retail product or a garment. Printing is the stage that sets the price, because the design and the colour repeat are what a buyer cannot source from a sewing subcontractor.

P01

Design and separation

Studio, repeats, colourways

A print house sells design before it sells cloth. Screens are separated, repeats are set, and each design is issued in a fixed number of colourways that the retail calendar can carry. This is the part of the business that a sewing floor cannot copy.

P02

Spinning

51,840 spindles

Ring spinning turns cotton into yarn for the group own looms. Most of the yarn is consumed internally, which is why the company sells fabric and made ups rather than greige yarn on the merchant market.

P03

Weaving

300 weaving machines

Greige cloth is woven to a width and a pick count that the print range can use. The weaving specification is set by the print design, not the other way round, and that link is where a composite mill wins.

P04

Dyeing, printing and finishing

The wet floor

Desizing, bleaching, mercerising, rotary screen printing, digital printing and the stenters that fix the hand of the cloth. Water, steam, chemistry and colour management decide whether a repeat matches on the third run.

P05

Stitching and made ups

Home textile and apparel

Bed linen, table linen, towels, cushions, and the apparel lines the group built over decades. In 2026 the export apparel part of this floor was closed, and the home textile and retail part continues.

P06

Power and effluent

Captive and treated

Captive generation from gas engines, gas and steam turbines, with diesel backup. A treatment plant takes the whole effluent stream to national environmental quality standards, and 20 MW of solar with 6.8 MWh of battery came online by March 2026.

Machine positions, being 51,840 spindles and 300 weaving machines, follow the company overview page read in November 2026 and describe installed capacity rather than current utilisation. The captive power mix, the effluent treatment to national environmental quality standards and the 20 MW solar with 6.8 MWh of battery commissioned by March 2026 follow the company pages and the directors report for the nine months to March 2026. Design, screen and finishing descriptions are the general sequence of a rotary print house, not a statement about any single Gul Ahmed line.

P02 Five year ledger

Sales Rose for Four Years, Then Fell by 17 Percent

The five year record is the clearest argument for looking at a second country, and the clearest warning about doing it on a preference alone. Sales grew from PKR 100.257 billion in FY2022 to PKR 157.905 billion in FY2025, then fell to PKR 131.090 billion in FY2026. Gross profit fell by half in the same year, from PKR 18.978 billion to PKR 9.572 billion.

  • Standalone sales, PKR millions
  • Bars scaled to the FY2025 peak
Gross margin, FY2026 7.30% Down from 12.02 percent in FY2025
Net margin, FY2026 (0.70%) Against 2.55 percent in FY2025
Return on equity, FY2026 (1.91%) Against 8.60 percent in FY2025

Sales and gross profit for FY2022 to FY2026 are the company financial highlights for the years ended 30 June, read in November 2026, and are standalone figures in PKR millions. Margins and return on equity are the company ratios for the same years. Bars are scaled against the highest year in the series, FY2025, so the FY2026 fall is drawn to proportion rather than to a truncated axis. The FY2026 result includes the effect of the discontinued export apparel segment described below.

P03 Stop ticket

The September Decision That Resets the Philippine Case

Any credible page about this company has to start here. On 29 September 2026 the board discontinued the export apparel segment and disclosed the decision to the Pakistan Stock Exchange. Spinning, weaving and home textiles continue. The exit cost about PKR 950 million after tax inside discontinued operations and turned an operating profit into a group loss.

Cut ticket

29.09.2026

Board decision on the export apparel segment, Karachi. Disclosed to the exchange the following week.

What the exit changes, and what it does not

It removes the cheapest argument for a Philippine plant. A group that has just closed apparel capacity at home is not looking to build the same capacity abroad, and any proposal that leans on cut and sew relocation is answering a question the board has already answered.

It sharpens the argument that remains. A print and home textile house needs fabric, colour, finishing and retail sourcing, and those are the layers where the Philippines has an honest gap to fill: making up, packing, decoration and sourcing near the fabric, with duty access to Europe and inside ASEAN.

PKR 950m Loss after tax booked in discontinued operations for the export apparel segment
29 Sep 2026 Board decision recorded, disclosed to the exchange at the start of the following week
11.6% Fall in direct export sales in dollar terms over the nine months to March 2026

The closure, the date and the continuing segments follow the Pakistan Stock Exchange disclosure of late September 2026 and the company clarification reported at the same time. The standalone loss, the discontinued operations loss of about PKR 950 million and the consolidated net loss of about PKR 339 million follow the audited results for the year ended 30 June 2026 and the company financial highlights. The nine month export figures follow the directors report for the period to March 2026. Statements about what the exit means for a Philippine site are our reading, not a company statement.

P04 Cut list

Ten Inputs a Print House Buys, and What the Philippines Has

Each input is judged against the Philippine base as we find it in 2026. The verdict is about what exists today at export quality, not what could be built with enough capital and time. Read the whole column before deciding anything: a plant is limited by its weakest input, not its strongest.

01

Cotton fibre

Import

The Philippines does not grow cotton at commercial scale. Lint arrives from the United States, Brazil, Australia or West Africa, so a cotton print house starts one freight leg behind a Punjab or Sindh mill.

02

Cotton yarn

Import

Spinning at export scale is thin. Yarn would come from Pakistan, India, Vietnam or Turkey, and a Philippine plant would pay for the margin that Gul Ahmed captures inside its own group.

03

Greige base cloth

Partly

Weaving exists for industrial, technical and some apparel fabric, and the Cavite and Laguna belt has mills with real looms. Wide width home textile quality at retail volume is still bought from outside.

04

Screens, engraving and print paste

Import

Rotary screens, engraving and the thickener and pigment system are specialised and arrive by sea, usually in four to eight weeks. Colour consistency depends on the chemistry batch, which makes this a working capital question as much as a freight question.

05

Digital print and finishing

Partly

Commission printers serve garment exporters and handle short runs and sampling. Wide width printing, repeatability across a long run and the stenter finishing a bed linen programme needs are the parts that would be built rather than rented.

06

Home textile making up

Partly

Cut and sew for bedding and table linen exists and can be expanded quickly. Terry weaving, wide width printing and the packing standard a hotel or a retail programme expects are not in place at that scale.

07

Cut and sew apparel

Available

The deepest layer of the Philippine base, with export quality sewing, technical auditing and pattern rooms. It is also the layer Gul Ahmed has just left at home, so a Philippine plant would be buying capacity the group decided not to keep.

08

Retail ready packing

Available

Polybags, hangtags, size stickers, barcodes and carton configuration to a vendor standard are routine for the converters that serve the electronics and garment export sectors.

09

Solar and captive power

Partly

Irradiation runs about 5.0 to 5.5 kilowatt hours per square metre per day, which makes rooftop solar economic, and the group has just built 20 MW at home. Grid power stays expensive, and a print line is a thermal load before it is a labour load.

10

English technical files

Available

Specifications, test reports, audit packs and customs documents are produced in English as a matter of course, so a technical file transfers from Karachi to Manila without a translation step.

Verdicts are our assessment of the Philippine industrial base in 2026, drawn from the sectors we already serve and from the supplier lists our customers work with. Import means no export scale capacity today, not a legal prohibition. Partly means the process exists but not at the width, the volume or the certification level a print house needs. Available means a buyer can place an order this quarter. Screen, chemistry and finishing lead times are typical sea freight estimates, not quotations.

P05 Permit line

Five Registrations Between a Site Decision and a First Container

The sequence is not negotiable and the order matters. Each step assumes the one before it, and the last two are where most of the elapsed time actually sits.

  1. Step 01

    Securities and Exchange Commission

    An export corporation can be wholly foreign owned, and the paid in capital floor in the Foreign Investments Act is aimed at domestic market enterprises. Ownership is set by statute rather than by a nominee arrangement.

  2. Step 02

    Economic zone or investment board registration

    The Philippine Economic Zone Authority registers a locator and issues the import permits, or the Board of Investments registers the activity under the priority plan. Either route carries the fiscal package described below.

  3. Step 03

    Bureau of Internal Revenue

    Books, registration and the value added tax position of a registered export enterprise, including zero rating on qualifying local purchases, power, water and telecommunications.

  4. Step 04

    Customs and registered exporter status

    Accreditation for the importer of looms, print ranges and screens, then registered exporter status so each consignment to the European Union can carry a statement on origin.

  5. Step 05

    Labour and local permits

    Department of Labor and Employment compliance for shift work, chemical safety and the plant level safety committee, then the local government permits at the site, which is where water, power and road access are settled.

Route described from the registration requirements in force in November 2026. Timelines are not quoted because they move with the agency, the zone and the completeness of the technical file. Confirm the current paid in capital floor and the zone requirements with the investment promotion agency and counsel before committing capital.

P06 Statute stack

Six Instruments That Set the Cost of a Philippine Plant

Incentives, ownership and duty access sit in six places. The first three decide what the plant pays at home, the last three decide what a container pays when it lands.

Republic Act 12066, signed November 2024

CREATE MORE

A registered enterprise pays 20 percent corporate income tax on net taxable income from the registered activity against the 25 percent standard rate, holds an income tax holiday of four to seven years, and may elect 5 percent special corporate income tax on gross income. Confirm the tier with the investment promotion agency before modelling it.

Republic Act 11647, as amended

Foreign Investments Act

Export manufacturing sits outside the Foreign Investment Negative List, so a Pakistani parent can hold one hundred percent without a Philippine partner of record. A business that sells to the domestic market faces a minimum paid in capital floor that the Act sets and the agency applies.

Republic Act 7916

Special Economic Zone Act

The Philippine Economic Zone Authority operates more than 400 zones with ready built shells, treated water, industrial power, bonded warehousing and single window permitting. Duty free import of capital equipment is the clause a printing or finishing plant cares about most.

Unilateral, reviewed on a cycle

European Union GSP Plus

Qualifying Philippine textiles and garments enter the 27 member states at zero customs duty when the consignment carries a registered exporter statement on origin. It is a preference, not a treaty: it is reviewed, it can be suspended, and it must be checked against the regulation in force at shipment.

In force for the Philippines since 2023

RCEP and the ASEAN trade area

The Regional Comprehensive Economic Partnership and the ASEAN Trade in Goods Agreement give Philippine origin goods tariff relief across fifteen Asia Pacific economies, with cumulation rules that reward regional sourcing rather than a single country supply chain.

Republic Act 11981

Tatak Pinoy Act

Domestic preference in government procurement and a national development programme that names priority industries. Textiles sit inside that list, which matters to uniform, hospital and institutional buyers even when a private brand order does not touch it.

Statute references follow the text of Republic Act 12066, Republic Act 11647, Republic Act 7916 and Republic Act 11981 in force in November 2026, and the European Union GSP Plus regulation as currently applied. Rates, holiday periods and qualification rules are restated in summary form only. Model them with the investment promotion agency and a tax adviser before any commitment.

P07 Mill ledger

Four Countries, Seven Lines, One Site Decision

The real alternatives are not only the Philippines. The comparison that matters is against the countries where a textile group already operates or could operate, on the seven dimensions that decide where a print and home textile plant goes.

Swipe the table sideways for all four countries

DimensionPakistanVietnamBangladeshPhilippines
Print and home textile depthDeep, with design, screens, processing and made ups inside one companyGarment depth is strong, print and home textile thinnerKnit fabric is strong, woven print and home textile thinnerCut and sew is strong, print and home textile capacity is thin
European Union dutyGSP Plus, with a registered exporter statementFree trade agreement in force since 2020Least developed country terms, with a transition period after graduationGSP Plus, with a registered exporter statement
United States dutyMost favoured nation, standard ratesMost favoured nation, standard ratesMost favoured nation, some programmes suspendedMost favoured nation, no bilateral agreement
ASEAN and RCEPOutside bothInside bothOutside bothInside both, RCEP in force since 2023
Water and steam for a wet floorGrid and gas constraints reported by the industry, partly offset by captive plantsStable supply, rising costGas pressure deficits reportedWater abundant, industrial power expensive
Economic zone accessExport processing zones in placeIndustrial parks and export processing enterprisesExport processing zones and economic zonesMore than 400 zones under one agency
Domestic retail marketLarge, and the base of the IDEAS chainLarge and growingLarge, price ledSmaller, urban and mall led, with a strong uniform and institutional layer

Duty positions follow the preference regimes in force in November 2026 and describe the general position for qualifying textile and apparel goods, not any single tariff line. Utility and labour commentary reflects the industry reporting we read in the same month and is indicative. The four country frame is ours, chosen because those are the bases a Pakistani print group and its competitors actually use.

P08 Honest limits

Six Reasons This Plant Might Not Be Built

Six things a site selection team should hear before the first deck. Each one is a reason a Philippine plant might not proceed, and each one is better said now than discovered in year two.

Reject note 01

A group that has just closed apparel capacity at home will not open apparel capacity abroad

The September 2026 decision was to stop exporting apparel, not to relocate it. The case for a Philippine site has to stand on print, home textile and retail sourcing. If the plan is a cut and sew satellite for a product line the board has already exited, it contradicts the board.

Reject note 02

Print chemistry and screens do not travel well

A print mill wins on colour consistency, and colour consistency depends on the same paste, the same water and the same screens run by the same team. Splitting print between Karachi and Laguna introduces a variable the customer will notice on the third reorder.

Reject note 03

Bed linen is bulky and cheap per kilo

Home textile fills a container quickly and earns little per cubic metre. A Philippine plant ships finished bed sets across an ocean to Europe or the Gulf, and freight becomes a larger share of landed cost than it is for a garment.

Reject note 04

Retail sourcing is not the same as manufacturing

IDEAS buys from many suppliers and needs design, quality control and vendor management near the source, not another factory. A sourcing office and a printing plant are different investments with different staffing, and one does not justify the other.

Reject note 05

Preference regimes move under your feet

GSP Plus is unilateral and reviewed on a cycle, and least developed country terms are scheduled to change. A plant is not built on a preference alone, because the preference can change while the building is still being paid for.

Reject note 06

Mindanao is cheaper and thinner at the same time

A site in Tagum City or Cagayan de Oro reaches the Pacific, sits inside a lower wage region and is close to the water a wet floor needs. The pool of print and dye house technicians there is smaller than in Cavite or Laguna, so the trade is a lower cost base against a longer training curve.

These limits are our analysis, not a finding of any study commissioned by the company. Where a figure appears elsewhere on the page it carries its period. Where no figure appears, the statement is qualitative on purpose, because the input is not published and a number would be invented.

P09 Commercial terms

Published Terms Before Anyone Commits Capital

For the apparel and uniform programmes we run ourselves, published terms rather than a quotation form. A group evaluating a country needs to know what a first order costs and how long it takes before it commits to a building.

Minimum order

50 pieces

Per design for production. Blank stock minimums depend on brand, colour and size mix.

Production lead time

3 to 6 weeks

After sample, artwork and payment approval. Ocean freight time is additional.

Published tee price

₱320.00

About $5.10, €4.45 or £3.85. The header currency switcher converts live and settles the cart in the chosen currency.

Payment

Bank transfer

Documentary collection or a letter of credit can be agreed for qualified larger orders.

Prices and lead times are ours and apply to orders we produce in Tagum City and Cagayan de Oro. They are not a quotation for another manufacturer and they do not describe the cost of building a plant. Conversions are indicative and the header currency switcher settles the cart at the live rate.

P10 Downstream layer

The Making Up and Decoration Floor We Already Run

We are not describing a country in the abstract. The cut and sew, decoration and packing capacity on this page is the capacity we operate, and it is the layer a print group can test before it commits to a building.

A print and home textile group evaluating a Philippine site would start by testing the layer that already works. That layer is making up, decoration and retail ready packing, and it is the reason a first order can be placed before any capital decision is taken. A pilot container tells a site selection team more about labour, freight and documentation than a feasibility study written from Karachi or Manila.

Our own production sits in Tagum City, Davao del Norte and Cagayan de Oro, Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings. We produce uniform, workwear and promotional apparel programmes in the volumes a factory, a zone or an institutional buyer actually orders, and we quote production, freight and the last leg separately so a landed cost can be compared with a South Asian or Vietnamese alternative on equal terms.

  • Cut and sew knitwear, woven tops, trousers and uniforms on our own floor, from sample through to retail packing.
  • Sublimation, screen print, direct to film, embroidery and heat transfer decoration for small runs and reorders.
  • Workwear, industrial uniforms and protective apparel for plant crews, zone neighbours and institutional buyers.
  • Pattern making, grading and technical packs produced in English, so a specification transfers without translation.
  • Export documentation, including the registered exporter statement that carries European duty relief on qualifying goods.
  • Two production points, Tagum City in Davao del Norte and Cagayan de Oro in Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings.

P11 Advisory

Gul Ahmed and the Philippines, Answered

The questions that arrive when a South Asian manufacturer, a Philippine zone or a procurement team opens this file for the first time, including the one that decides most projects: whether a Philippine site can be justified after an apparel exit.

Does Gul Ahmed Textile Mills have a plant or an office in the Philippines?

No, as of November 2026. The manufacturing base is at Landhi Industrial Area in Karachi, with selling companies in the United Arab Emirates, the United Kingdom and the United States, and no Philippine factory, office or announced investment. This page is an independent analysis of what a Philippine site could carry for a company of that shape. It is not affiliated with, endorsed by or authorised by Gul Ahmed Textile Mills Limited.

What happened to the Gul Ahmed export apparel division?

The board decided on 29 September 2026 to discontinue the export apparel segment and disclosed the decision to the Pakistan Stock Exchange. The company stated that spinning, weaving and home textiles continue. The exit booked a loss after tax of about PKR 950 million inside discontinued operations for the year to 30 June 2026, which turned an operating profit into a consolidated net loss of about PKR 339 million.

Why would a Pakistani print and home textile group look at the Philippines?

Four reasons repeat. Access to ASEAN and RCEP from inside the bloc rather than from outside it. English as the language of government, courts and factory documentation, so a technical file transfers without translation. A cut and sew and decoration base that can carry retail and uniform programmes while any print or finishing capacity is built. And country concentration risk: a group that already exports to Europe, the Americas and Asia is managing the same question a Philippine site answers.

What could a Philippine plant actually make for Gul Ahmed?

The reachable list is downstream. Home textile making up, retail ready packing, decoration and embroidery, apparel sourcing for the IDEAS chain, and fabric finishing on imported greige. Printing is possible but starts with imported screens, imported chemistry, a water treatment plant and a trained colour team. Cotton spinning is not a credible first move, because the fibre and the scale are not here.

What does the Philippines not have for a print and home textile house?

Cotton growing, spinning at export scale, wide width print and finishing, terry weaving, a deep pool of print and dye house technicians, and a domestic retail market of the size the IDEAS chain serves in Pakistan. It does have cut and sew depth, decoration capacity, packaging, English documentation, more than 400 economic zones, and zero duty access to the European Union on qualifying goods.

Which incentives would a textile plant register under?

CREATE MORE, Republic Act 12066, gives a registered business enterprise 20 percent corporate income tax, an income tax holiday of four to seven years, and an election of 5 percent special corporate income tax on gross income for an export enterprise. Export manufacturing can be wholly foreign owned under the Foreign Investments Act. The Philippine Economic Zone Authority adds zone registration, bonded warehousing, duty free capital equipment and single window permitting. Confirm the current rules with the investment promotion agency before modelling them.

Is there a free trade agreement between Pakistan and the Philippines?

No. Both are World Trade Organization members and trade on most favoured nation terms. The Philippines sits inside ASEAN and the Regional Comprehensive Economic Partnership, and holds European Union GSP Plus status. Pakistan holds GSP Plus with the European Union as well but is outside ASEAN and RCEP. Confirm the exact tariff line with a licensed customs broker before pricing a container in either direction.

What are your own minimum order, lead time and price for apparel?

Production starts at 50 pieces per design. Lead time is 3 to 6 weeks after sample, artwork and payment approval, with freight additional. The published tee price is ₱320.00, about $5.10, €4.45 or £3.85, and the header currency switcher converts live at checkout. We quote from Tagum City and Cagayan de Oro, and we separate production, freight and the last leg so a landed cost can be compared with a domestic or South Asian alternative on equal terms.

P12 Direct enquiry

Send the Specification to Our South Asia Desk

Send the specification, the monthly volume, the destination port and the date you need the goods on site. We will come back with a costed plan that separates production, freight and the last leg, so you can see which line moves when the peso or the sailing schedule does. Our offices are open Mon to Sat, 8:30 AM to 5:00 PM.

Sources and scope: company identity, founding year, listing year, chairman, chief executive, vice chairman, registered office, registration number, subsidiaries, retail store count, installed spindle and weaving capacity, captive power, effluent treatment and manufacturing sequence follow the Gul Ahmed Textile Mills Limited corporate pages, read in November 2026. Sales, gross profit, loss after tax, loss per share, gross margin, net margin and return on equity are the audited standalone figures for the years ended 30 June 2022 to 30 June 2026 as published in the company financial highlights. Consolidated revenue and the consolidated net loss are the group figures for the year to 30 June 2026. The discontinuation of the export apparel segment, the board date of 29 September 2026, the continuing spinning, weaving and home textile segments, the discontinued operations loss of about PKR 950 million and the nine month export movement follow the Pakistan Stock Exchange disclosure, the company clarification and the directors report for the period to March 2026. The 20 MW solar installation and 6.8 MWh battery, and the announced relocation to Nooriabad, follow the directors report for the nine months to March 2026 and the industry reporting of the same period. Certifications named in the company record and in this page, including ISO 9001, SA 8000, Oeko Tex, the Global Organic Textile Standard, the Organic Content Standard, the Global Recycled Standard, Cotton Made in Africa and Fair Trade, follow the company certification page read in November 2026. Philippine supply positions, zone commentary, rents, wages, power tariffs, water charges, transit times and qualification periods reflect the market as we find it in 2026 and are our assessment; they must be confirmed with the zone, the utility, the carrier, the certification body and the counterparty before commitment. Incentive terms follow CREATE MORE, Republic Act 12066, the amended Foreign Investments Act, Republic Act 11647, the Special Economic Zone Act, Republic Act 7916, and the Tatak Pinoy Act, Republic Act 11981. Trade terms follow the European Union Generalized Scheme of Preferences Plus and the registered exporter system, the Regional Comprehensive Economic Partnership, the ASEAN Trade in Goods Agreement and the least developed country graduation schedule for Bangladesh. This page is an independent market analysis. It is not affiliated with, endorsed by or authorised by Gul Ahmed Textile Mills Limited, and it does not describe any announced Gul Ahmed office, plant, subsidiary or investment in the Philippines.