Shift record
Nishat Mills Limited and the Philippines: Textile Manufacturing, Investment Destination and Manufacturing Hub
Nishat Mills has spun, woven, dyed and stitched in Pakistan since 1951, and now runs 225,408 spindles, 1,088 looms, a denim plant and 174 megawatts of captive power across four Punjab cities, on PKR 181.645 billion of revenue in the year to 30 June 2026, its highest on record, with exports of about US$355.136 million. It has no plant in the Philippines. This page sets out the company record, the machine floor, the inputs a composite mill actually buys, the parts of that chain the Philippines can carry today, and what Philippine law offers a group that already exports to Europe, the Americas and Asia.
L00 Company record
A Lahore Partnership That Became Pakistan's Largest Composite Mill
Nishat Mills started in 1951 as a partnership, incorporated in 1959, and listed on the Karachi Stock Exchange on 27 November 1961. Seventy five years later it describes itself as the flagship of Nishat Group and the largest vertically integrated textile company in Pakistan, with a factory list that runs from cotton spinning to stitched garments and its own electricity. These are the identity lines a supplier file or a due diligence pack opens with, each carrying its date and basis.
Identity, founding year, incorporation year, listing date, chairman, chief executive, registered office and registration numbers follow the company corporate site and the annual report for the year ended 30 June 2026, read in November 2026. Revenue, exports, profit after tax, consolidated revenue and the balance sheet total are the audited figures for that financial year, with the dollar figure converted at the rate the company used in its own report. Headcount is the company figure at the same date. Figures move at each half year and each annual report.
L01 Machine floor
Seven Divisions, One Gate, and a Shift Up the Value Chain
The counts below are the company stated machine positions at 30 June 2026. Read them as a chain rather than a list: cotton enters as fibre at Faisalabad, leaves as yarn, becomes greige cloth on the looms, takes colour on the dye ranges, and exits as bed linen, towels, denim or a stitched garment. Very little of what the group spins is sold as yarn, which is why a single figure for spinning revenue understates the business.
Spinning
Ring spinning across the Punjab units, with 13,320 rotors alongside it. Most of the yarn never leaves the group, which is the point of a composite mill.
Weaving
Air jet weaving that turns the group yarn into greige cloth for its own dye house, its home textile line and outside converters.
Denim
A denim plant with its own rope dyeing range, built to sell finished jeans rather than fabric alone. The 98 denim looms sit inside the 1,088 loom total.
Dyeing
Thies dyeing machines beside 7 thermosol ranges, the wet floor that decides colour repeatability and water cost.
Printing
Digital printing machines supported by 4 rotary printers, the line that carries small runs and short reorder cycles.
Stitching
Home textile, terry and garment stitching under one ownership, from bed linen to bath robes to apparel.
Power
Captive generation across eight plants at the major sites, a hedge against grid interruptions that a dye house cannot absorb.
Machine positions are the company figures at 30 June 2026, published on the corporate site and in the annual report financial highlights. The direction of travel matters more than any single count: spindles fell from 251,808 at 30 June 2023 to 225,408 three years later, rotors rose from 7,320 to 13,320, and looms rose from 931 to 1,088. Fewer spindles and more looms is a mill choosing to sell cloth and finished goods rather than yarn, which is the same move a Philippine site would have to support.
L02 Chronology
The Listing and Acquisition Record, 1951 to 2026
A Pakistani textile group is often described by the year it was founded and nothing else. The more useful record is the sequence of listings and acquisitions, because that is where the composite structure, the apparel floor and the export orientation come from.
- 1951
The business starts as a partnership, the trading and milling house that later becomes the group flagship.
- 1959
Incorporated as a private limited company, the form that carries the machines and the listing.
- 1961
Lists on the Karachi Stock Exchange on 27 November, the date the company still counts as its public anniversary.
- 1989
Lists on the Lahore Stock Exchange on 11 March as the exchange network widens.
- 1992
Lists on the Islamabad Stock Exchange on 10 August, completing the three exchange record of that era.
- 1996
Acquires the operating assets of Nishat Tek Limited and Nishat Fabrics Limited, the first consolidation step.
- 2008
Acquires the assets of Nishat Apparel Limited, adding the apparel floor to the yarn, cloth and home textile base.
- 2011
Marks the golden jubilee of the listing, fifty years on the exchange without a break in the quoted record.
- 2026
Reports the highest revenue in its history at PKR 181.645 billion, with a pilot workwear garment unit planned and the denim and technical fabric lines already funded.
Dates follow the company history page and the annual reports for the listing and acquisition years, read in November 2026. The three exchange listings of 1961, 1989 and 1992 reflect the Karachi, Lahore and Islamabad exchanges of that era, which later consolidated into the Pakistan Stock Exchange. The 2026 entry combines the audited revenue figure with the workwear pilot disclosed at the corporate briefing session in November 2025.
L03 Footprint
Four Cities, Three Selling Arms, One Deliberate Gap
Four Punjab cities carry the manufacturing, and three overseas companies carry the selling. The Philippine entry is deliberately empty, and it should stay empty on this page until the company announces otherwise.
Lahore
Head office
The registered office sits at 53-A, Lawrence Road, with dyeing, printing, home textile, terry and the apparel stitching floors around the city.
Faisalabad
Spinning and power
The largest spinning concentration, with captive generation on site. This is where a large share of the 225,408 spindles turns cotton into yarn.
Sheikhupura
Weaving
Air jet weaving capacity that feeds the group dye house and the outside cloth trade, the step between yarn and finished fabric.
Feroze Wattwan
Spinning and rotors
Rotor spinning and ring spinning together, the unit that gives the group its coarse count and blended yarn range.
United States and the Gulf
Selling arms
Nishat USA Inc. since 2009, Nishat Linen Trading LLC in the United Arab Emirates since 2011, and Nishat International FZE since 2013. The group sells into the market it ships to.
Philippines
No site
No factory, no office and no announced investment as of November 2026. Everything below is an assessment of what a Philippine site could carry, not a report of a decision the company has taken.
Site list follows the company about page and the annual report, read in November 2026, which name manufacturing units in Lahore, Faisalabad, Sheikhupura and Feroze Wattwan. The overseas selling companies and their formation years follow the subsidiaries note in the annual report. The Philippine card reflects our own check of November 2026 and is not a statement from the company.
L04 Verdict lines
What a Composite Mill Buys, and What the Philippines Has
Ten inputs, each judged against the Philippine base as we find it in 2026. The verdict is about what exists today at export quality, not what could be built with enough capital. Read the whole column before deciding anything: a plant is limited by its weakest input, not its strongest.
Cotton fibre
ImportThe Philippines does not grow cotton at commercial scale, so lint would arrive from the United States, Brazil, Australia or West Africa. A cotton composite cannot be rebuilt here from the farm up.
Combed cotton yarn
ImportSpinning at export scale is thin. Yarn would come from Pakistan, India, Vietnam or Turkey, which means a Philippine plant starts with the spread that Nishat removes by spinning its own.
Polyester and blended yarn
ImportThere is no filament extrusion and no large polyester spinning base. Blended yarns for workwear and uniforms arrive as imports, usually through Singapore or directly from China and India.
Greige woven fabric
PartlyWeaving exists for industrial, technical and some apparel fabric, and the Cavite and Laguna belt has mills with real looms. Broad apparel and wide width home textile quality at volume is still bought from outside.
Dyeing, printing and finishing
PartlyCommission dye houses serve garment exporters and handle reactive and disperse work. Thermosol ranges, rotary printing at wide width and the water treatment a home textile line needs are the parts that would be built rather than rented.
Denim wash and finish
PartlyLaundries and wash houses here already serve denim brands for garment finishing, and they carry the ozone and laser equipment a modern wash line uses. Rope dyeing and denim weaving are absent.
Cut and sew apparel
AvailableThe deepest layer of the Philippine base, with export quality sewing, technical auditing and pattern rooms. This is the work a satellite plant can start on the month the lease is signed.
Workwear and technical garments
AvailableUniform and protective apparel makers serve industrial, hospital and utility buyers today, including our own floor in Tagum City and Cagayan de Oro. The line Nishat is piloting at home is already running here.
Home textile and terry making up
PartlyCut and sew for bedding and towels exists and can be expanded. Terry weaving and wide width printing at the scale of a hotel or retail programme are not in place and would need imported machines.
Packaging and floor ready preparation
AvailablePolybags, hangtags, cartons and retail packing to a vendor standard are routine for the converters that serve the electronics and garment export sectors. Short last mile, low qualification cost.
Verdicts are our assessment of the Philippine industrial base in 2026, drawn from the sectors we already serve and from the supplier lists our customers work with. "Import" means no export scale capacity today, not a legal prohibition. "Partly" means the process exists but not at the width, the volume or the certification level a composite mill needs. "Available" means a buyer can place an order this quarter.
L05 Permit rail
Five Registrations Between a Site Decision and a First Container
The sequence is not negotiable and the order matters. Each rung assumes the one before it, and the last two are where most of the elapsed time actually sits.
Securities and Exchange Commission
An export corporation can be wholly foreign owned, and the paid in capital floor in the Foreign Investments Act is aimed at domestic market enterprises rather than at a business that sells abroad. The ownership is set by statute rather than by a nominee arrangement.
Economic zone or investment board registration
The Philippine Economic Zone Authority registers a locator and issues the import permits, or the Board of Investments registers the activity under the priority plan. Either route carries the fiscal package described below.
Bureau of Internal Revenue
Books, registration and the value added tax position of a registered export enterprise, including the zero rating on qualifying local purchases, power, water and telecommunications.
Customs and registered exporter status
Bureau of Customs accreditation for the importer of looms, dye ranges and yarn, then registered exporter status so each consignment to the European Union can carry a statement on origin.
Labour and local permits
Department of Labor and Employment compliance for shift work, occupational safety and the plant level safety committee, then the local government permits at the site, which is where water, power and road access are settled.
Route described from the registration requirements in force in November 2026. Timelines are not quoted because they move with the agency, the zone and the completeness of the technical file. Confirm the current paid in capital floor and the zone requirements with the investment promotion agency and counsel before committing capital.
L06 Statute stack
Six Instruments That Set the Cost of a Philippine Plant
Incentives, ownership and duty access sit in six places. The first three decide what the plant pays at home, the last three decide what a container pays when it lands.
Republic Act 12066, signed November 2024
CREATE MORE
A registered enterprise pays 20 percent corporate income tax on net taxable income from the registered activity against the 25 percent standard rate, holds an income tax holiday of four to seven years, and may elect 5 percent special corporate income tax on gross income. Confirm the tier with the investment promotion agency before modelling it.
Republic Act 11647, as amended
Foreign Investments Act
Export manufacturing sits outside the Foreign Investment Negative List, so a Pakistani parent can hold one hundred percent without a Philippine partner of record. A business that sells to the domestic market faces a minimum paid in capital floor that the Act sets and the agency applies, so confirm the current figure before modelling an ownership structure.
Republic Act 7916
Special Economic Zone Act
The Philippine Economic Zone Authority operates more than 400 zones with ready built shells, treated water, industrial power, bonded warehousing and single window permitting. Duty free import of capital equipment is the clause a weaving or dyeing plant cares about most.
Unilateral, reviewed on a cycle
European Union GSP Plus
Qualifying Philippine textiles and garments enter the 27 member states at zero customs duty when the consignment carries a registered exporter statement on origin. It is a preference, not a treaty: it is reviewed, it can be suspended, and it must be checked against the current regulation at the time of shipment.
In force for the Philippines since 2023
RCEP and the ASEAN trade area
The Regional Comprehensive Economic Partnership and the ASEAN Trade in Goods Agreement give Philippine origin goods tariff relief across fifteen Asia Pacific economies, with cumulation rules that reward regional sourcing rather than a single country supply chain.
Republic Act 11981
Tatak Pinoy Act
Domestic preference in government procurement and a national development programme that names priority industries. Textiles sit inside that list, which matters to uniform and institutional buyers even when a private brand order does not touch it.
Statute references follow the text of Republic Act 12066, Republic Act 11647, Republic Act 7916 and Republic Act 11981 in force in November 2026, and the European Union GSP Plus regulation as currently applied. Rates, holiday periods and qualification rules are restated in summary form only. Model them with the investment promotion agency and a tax adviser before any commitment.
L07 Mill ledger
Four Countries, Seven Lines, One Site Decision
Nishat's real alternatives are not only the Philippines. The comparison that matters is against the countries where a textile group already operates or could operate, on the seven dimensions that decide where a plant goes.
| Dimension | Pakistan | Vietnam | Bangladesh | Philippines |
|---|---|---|---|---|
| Yarn through to finished cloth | Full composite, spinning, weaving, dyeing, printing and stitching inside one company | Garment depth is strong, most fabric and yarn is bought in | Knit fabric is strong, woven is thinner, yarn is mostly bought in | Cut and sew is strong, yarn and broad woven fabric are bought in |
| European Union duty | GSP Plus, with a registered exporter statement | Free trade agreement in force since 2020 | Least developed country terms until graduation in November 2026, then a transition period | GSP Plus, with a registered exporter statement |
| United States duty | Most favoured nation, standard rates | Most favoured nation, standard rates | Most favoured nation, some programmes suspended | Most favoured nation, no bilateral agreement |
| ASEAN and RCEP | Outside both | Inside both | Outside both | Inside both, RCEP in force since 2023 |
| Weaving and finishing labour depth | Deep, seventy years of composite milling | Deep in garment, growing in fabric | Deep in knit, thinner in woven and home textile | Thin in weaving and wet processing, deep in cut and sew |
| Power and water for wet processing | Grid and gas constraints reported by the industry, partly offset by captive plants | Stable supply, rising cost | Gas pressure deficits reported | Water abundant, industrial power expensive |
| Economic zone access | Export processing zones in place | Industrial parks and export processing enterprises | Export processing zones and economic zones | More than 400 zones under one agency |
Duty positions follow the preference regimes in force in November 2026 and describe the general position for qualifying textile and apparel goods, not any single tariff line. Labour depth and utility commentary reflect the industry reporting we read in the same month and are indicative. The four country frame is ours, chosen because those are the bases a Pakistani composite group and its competitors actually use.
L08 Honest limits
Six Things a Philippine Site Will Not Fix
Six things a site selection team should hear before the first deck. Each one is a reason a Philippine plant might not be built, and each one is better said now than discovered in year two.
The advantage is the yarn, and yarn does not travel well
A composite mill wins because it converts its own yarn the same week it spins it, without a freight leg or a customs entry in between. A Philippine plant that imports yarn inherits a cost the group does not pay at home. If the yarn still comes from Pakistan, the Philippine site has to justify itself on something other than conversion cost.
Dyeing and finishing are thermal, not labour
Dye ranges, stenters and rotary printers run on steam, water and time. Philippine industrial power costs more than the tariff at a Punjab industrial estate, and a dye house needs a water treatment plant that a sewing floor does not. Sewing comes first because it carries the smallest power share.
Preference regimes move under your feet
Bangladesh graduates from least developed country status in November 2026, with a European transition period after graduation. GSP Plus is unilateral and reviewed on a cycle. A plant is not built on a preference alone, because the preference can change while the building is still being paid for.
Brand qualification takes a year or two, not a quarter
Retail and brand buyers onboard a vendor through social audits, chemical management audits, wastewater testing and a factory environmental module. None of it is compressible. A group that already holds those approvals in Pakistan still has to qualify the new building, because the audit is issued to a site and not to a company.
A satellite plant exports on day one
Domestic Philippine demand for woven apparel and home textile is small next to a line built for export volume. The plant clears United States and European compliance from the first container, competes on freight against Vietnam and China, and carries the working capital of a two month ocean pipeline.
Mindanao is cheaper and thinner at the same time
A site in Tagum City or Cagayan de Oro reaches the Pacific and sits inside a lower wage region, and the pool of weaving and dye house technicians is smaller there than in Cavite or Laguna. The honest trade is a lower cost base against a longer training curve and a shorter list of nearby suppliers.
These limits are our analysis, not a finding of any study commissioned by the company. Where a figure appears elsewhere on the page it carries its period. Where no figure appears, the statement is qualitative on purpose, because the input is not published and a number would be invented.
L09 Commercial terms
Published Terms Before Anyone Commits Capital
For the apparel and uniform programmes we run ourselves, published terms rather than a quotation form. A group evaluating a country needs to know what a first order costs and how long it takes before it commits to a building.
Minimum order
50 pieces
Per design for production. Blank stock minimums depend on brand, colour and size mix.
Production lead time
3 to 6 weeks
After sample, artwork and payment approval. Ocean freight time is additional.
Published tee price
₱320.00
About $5.10, €4.45 or £3.85. The header currency switcher converts live and settles the cart in the chosen currency.
Payment
Bank transfer
Documentary collection or a letter of credit can be agreed for qualified larger orders.
Prices and lead times are ours and apply to orders we produce in Tagum City and Cagayan de Oro. They are not a quotation for another manufacturer and they do not describe the cost of building a plant. Conversions are indicative and the header currency switcher settles the cart at the live rate.
L10 Downstream layer
The Cut and Sew Floor We Already Run
We are not describing a country in the abstract. The cut and sew, decoration and uniform capacity on this page is the capacity we operate, and the workwear line Nishat is piloting at home is already a live product category here.
A Pakistani composite group evaluating a Philippine site would start by testing the layer that already works. That layer is cut and sew, decoration and floor ready packing, and it is the reason a first order can be placed before any capital decision is taken. A pilot container tells a site selection team more about labour, freight and documentation than a feasibility study written from Lahore or Manila.
Our own production sits in Tagum City, Davao del Norte and Cagayan de Oro, Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings. We produce uniform, workwear and promotional apparel programmes in the volumes a factory, a zone or an institutional buyer actually orders, and we quote production, freight and the last leg separately so a landed cost can be compared with a South Asian or Vietnamese alternative on equal terms.
- Cut and sew knitwear, woven tops, trousers and uniforms on our own floor, from sample through to retail packing.
- Sublimation, screen print, direct to film, embroidery and heat transfer decoration for small runs and reorders.
- Workwear, industrial uniforms and protective apparel for plant crews, zone neighbours and institutional buyers.
- Pattern making, grading and technical packs produced in English, so a specification transfers without translation.
- Export documentation, including the registered exporter statement that carries European duty relief on qualifying goods.
- Two production points, Tagum City in Davao del Norte and Cagayan de Oro in Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings.
L11 Advisory
Nishat Mills and the Philippines, Answered
The questions that arrive when a South Asian manufacturer, a Philippine zone or a procurement team opens this file for the first time, including the one that decides most projects: whether a Philippine site can be justified on cost at all.
Does Nishat Mills Limited have a plant or an office in the Philippines?
No, as of November 2026. The manufacturing base is in Pakistan, with units in Lahore, Faisalabad, Sheikhupura and Feroze Wattwan, selling companies in the United States and the United Arab Emirates, and no Philippine factory, office or announced investment. This page is an independent analysis of what a Philippine site could carry for a company of that shape. It is not affiliated with, endorsed by or authorised by Nishat Mills Limited.
Is there a free trade agreement between Pakistan and the Philippines?
No. Both are World Trade Organization members and trade on most favoured nation terms. The Philippines sits inside ASEAN and the Regional Comprehensive Economic Partnership, and holds European Union GSP Plus status. Pakistan holds GSP Plus with the European Union as well but is outside ASEAN and RCEP. Confirm the exact tariff line with a licensed customs broker before pricing a container in either direction.
Why would a Pakistani composite mill look at the Philippines at all?
Four reasons repeat. Access to ASEAN and RCEP from inside the bloc rather than from outside it. English as the language of government, courts and factory documentation, so a technical file transfers without translation. A cut and sew and decoration base that can carry apparel and workwear programmes while any weaving or finishing capacity is built. And country concentration risk: a group that already exports to Europe, the Americas and Asia is managing the same question a Philippine site answers.
What could a Philippine plant actually make for Nishat?
The reachable list is downstream. Cut and sew woven and knit apparel, workwear and protective garments, home textile and terry making up, decoration and embroidery, packaging and floor ready preparation. Weaving and dyeing are possible but start with imported machines, a water treatment plant and a trained crew. Cotton spinning is not a credible first move, because the fibre and the scale are not here.
What does the Philippines not have for a woven and home textile group?
Cotton growing, spinning at export scale, filament extrusion, wide width thermosol dyeing, rotary printing at home textile width, terry weaving and a deep pool of loom and dye house technicians. It does have cut and sew depth, decoration capacity, packaging, English language documentation, more than 400 economic zones, and zero duty access to the European Union on qualifying goods.
Which incentives would a textile plant register under?
CREATE MORE, Republic Act 12066, gives a registered business enterprise 20 percent corporate income tax, an income tax holiday of four to seven years, and an election of 5 percent special corporate income tax on gross income for an export enterprise. Export manufacturing can be wholly foreign owned under the Foreign Investments Act. The Philippine Economic Zone Authority adds zone registration, bonded warehousing, duty free capital equipment and single window permitting. Confirm the current rules with the investment promotion agency before modelling them.
How long does brand vendor qualification take?
Twelve to twenty four months is the realistic range for a new textile or apparel site serving a global retail or brand buyer. Social audits, chemical management, wastewater testing, factory environmental modules and a first production run all sit on the critical path. A group that already holds those approvals elsewhere still has to qualify the new building.
What are your own minimum order, lead time and price for apparel?
Production starts at 50 pieces per design. Lead time is 3 to 6 weeks after sample, artwork and payment approval, with freight additional. The published tee price is ₱320.00, about $5.10, €4.45 or £3.85, and the header currency switcher converts live at checkout. We quote from Tagum City and Cagayan de Oro, and we separate production, freight and the last leg so a landed cost can be compared with a domestic or Vietnamese alternative on equal terms.
L12 Direct enquiry
Send the Specification to Our South Asia Desk
Send the specification, the monthly volume, the destination port and the date you need the goods on site. We will come back with a costed plan that separates production, freight and the last leg, so you can see which line moves when the peso or the sailing schedule does. Our offices are open Mon to Sat, 8:30 AM to 5:00 PM.
Sources and scope: company identity, founding year, incorporation year, listing dates, chairman, chief executive, registered office, registration number and plant locations follow the Nishat Mills Limited corporate site, the corporate briefing session material of November 2025 and the annual report for the year ended 30 June 2026, all read in November 2026. Revenue, export revenue, profit after tax, consolidated revenue, total equity and liabilities, and employee count are the audited figures for that financial year or the company presentation of them. Machine positions, including spindles, rotors, looms, dyeing machines, printing machines and stitching machines, follow the annual report financial highlights and the corporate site about page at 30 June 2026. Group scale, being assets of about PKR 4 trillion, more than 54,000 direct employees and nine listed companies, follows the November 2025 corporate briefing. Workwear commentary follows the November 2025 analyst briefing summary. Philippine supply positions, zone commentary, rents, wages, power tariffs, water charges, transit times and qualification periods reflect the market as we find it in 2026 and are our assessment; they must be confirmed with the zone, the utility, the carrier, the certification body and the counterparty before commitment. Incentive terms follow CREATE MORE, Republic Act 12066, the amended Foreign Investments Act, Republic Act 11647, the Special Economic Zone Act, Republic Act 7916, and the Tatak Pinoy Act, Republic Act 11981. Trade terms follow the European Union Generalized Scheme of Preferences Plus and the registered exporter system, the Regional Comprehensive Economic Partnership, the ASEAN Trade in Goods Agreement and the least developed country graduation schedule for Bangladesh. This page is an independent market analysis. It is not affiliated with, endorsed by or authorised by Nishat Mills Limited, and it does not describe any announced Nishat office, plant, subsidiary or investment in the Philippines.
