Dye lot sheet
Feroze1888 Mills Limited and the Philippines: Textile Manufacturing, Investment Destination and Manufacturing Hub
Feroze1888 has woven towels in Karachi since 1972 and now runs spinning, weaving, dyeing, printing, embroidery, stitching and its own carton plant across five plant clusters, on PKR 67.735 billion of net sales in the year to 30 June 2026, with PKR 65.550 billion of that exported and about 73 percent of the export book going to North America. It has no plant in the Philippines. This page sets out the company record, the eight divisions, the inputs a towel mill actually buys, the parts of that chain the Philippines can carry today, and what Philippine law offers a group that already sells into Europe, North America and Asia.
L00 Company record
A Karachi Weaver That Became a Vertically Integrated Towel Mill
Feroze1888 was incorporated in October 1972 and opened its weaving unit the same year. Fifty four years later it describes itself as a vertically integrated terry manufacturer serving home, hospitality and healthcare, operating through a partnership with the American group 1888 Mills. These are the identity lines a supplier file or a due diligence pack opens with, each carrying its date and basis.
Identity, incorporation date, chairman, chief executive, registered office, corporate office, company registration number and national tax number follow the company corporate site and the annual report for the year ended 30 June 2026, read in November 2026. Net sales, exports, profit after tax, earnings per share and shareholders equity are the audited figures for that financial year, restated here in round terms from the Financial Highlights June 2026 sheet. Headcount is the company figure for the same period. Figures move at each half year and each annual report.
L01 Mill floor
Eight Divisions Behind One Gate
Read the divisions as a chain rather than a list. Cotton enters as bale at Hub, leaves as yarn, becomes terry on the looms, takes colour on the wet floor, gains a crest or a print, and exits as a stitched, packed, carton ready programme. Almost none of what the company spins is sold as yarn, which is why a single figure for spinning revenue would understate the business.
Spinning
1985 onward
Ring and rotor spinning that turns cotton into the pile and ground yarn a terry loom needs. The Hub unit opened in 1985 and the spinning floor was expanded again inside the 2019 to 2025 programme.
Weaving
Since 1972
The founding division. Terry looms produce the towel body in white, dyed, dobby and jacquard constructions across hand, bath, kitchen and beach sizes.
Dyeing and processing
Since 1996
Fibre dyeing arrived in 2008 and the wet floor has run since 1996. Bleaching, dyeing and finishing sit behind an effluent treatment plant and a water reclaim plant.
Printing
Since 2014
Rotary and digital printing that carries the patterned towel programmes and short seasonal runs a retail buyer reorders inside a season.
Embroidery
Since 2017
Brand marks, monograms and hotel crests on towel borders, robes and the healthcare line, which is where a hospitality account is usually won.
Cut and sew
Since 1980
Stitching for bathrobes, baby t shirts and patient gowns. The sewing floor is the division that turns a towel programme into a healthcare or hospitality pack.
Packaging
Since 2018
An automated corrugated carton plant and packaging accessories on site, so a retail ready carton is not bought in from a third party.
Warehousing
Since 2006
Bulk cotton and finished goods storage at the plant gate, financed and built from 2006. A towel mill holds more inventory than a garment plant and needs the floor.
Division list, opening years and capability descriptions follow the company strengths pages, the history page and the annual report for the year ended 30 June 2026, read in November 2026. The company does not publish spindle, loom or machine counts, so none appear on this page. Any figure of that kind circulating elsewhere is not the company's own disclosure and should be checked at source before it reaches a supplier file.
L02 Chronology
The Dates That Explain the Shape of the Company
A textile group is often described by the year it was founded and nothing else. The more useful record is the order in which the divisions arrived, because each date is a step from weaver to converter, from converter to composite mill, and from mill to a company that owns its water, its cartons and its software.
- 1972
Incorporated in October as a public limited company and the weaving unit opens the same year, which is the date the company counts as its start.
- 1980
Stitching unit opens, adding sewn product alongside the woven towel.
- 1985
Spinning unit opens at Hub in Balochistan, the first step from weaver to composite mill.
- 1996
Dyeing and processing unit opens, moving colour in house rather than through a commission dyer.
- 2006
Large warehousing facility added, sized for cotton and finished goods rather than for a trading operation.
- 2007
Feroze Textile Industries merges with Friendship Textile Mills, widening the base.
- 2008
Effluent treatment plant and fibre dyeing facility commissioned. Both are the wet floor maturing.
- 2009
Naqshbandi Industries Limited acquired, then renamed Feroze1888 in 2010.
- 2012
Feroze Textile Industries merges into Feroze1888, consolidating the manufacturing under one company.
- 2014
Printing facility installed, adding pattern and seasonal design to the white and dyed ranges.
- 2016
Water reclaim plant commissioned. Treated water is recovered and reused in process.
- 2017
Embroidery setup installed, which is the capability hotel and healthcare crests need.
- 2018
Automated corrugated carton plant and packaging accessories commissioned on site.
- 2026
SAP S/4HANA live, a woven and knitted product line added, and spinning and weaving capacity raised across the 2019 to 2025 programme. Net sales reach PKR 67.735 billion for the year to 30 June 2026.
Dates follow the company history page and the annual report for the year ended 30 June 2026, read in November 2026. The 2019 to 2025 programme is described in the annual report as the addition of a woven and knitted product line, an increase in spinning and weaving capacity, and the migration from Oracle and legacy systems to SAP S/4HANA, which went live in the year to 30 June 2026.
L03 Footprint
Five Plant Clusters, One Selling Arm, One Deliberate Gap
The manufacturing sits in Karachi and in Balochistan, the selling sits in the United Kingdom and the United States, and the Philippine entry is deliberately empty. It should stay empty on this page until the company announces otherwise.
Karachi industrial plots
Head office and plants
Landhi, SITE and North Karachi, about 46.65 acres
The registered office sits at H-23/4-A in Landhi, with weaving, dyeing, printing, stitching and packaging around it, plus the SITE and North Karachi plots that carry supporting divisions.
Deh Moachko, Keamari
Plant cluster
124.23 acres
The largest single land holding in the estate, in Keamari Town at the western edge of Karachi, close to the port approaches rather than inland.
Hub, Lasbela
Spinning and power
28.86 acres in Balochistan
The Balochistan site that opened with spinning in 1985. It carries the cotton to yarn step at distance from the Karachi wet floor.
United Kingdom
Selling arm
Feroze1888 Mills UK Private Limited
A United Kingdom company held in the associated undertaking list, which is how a Karachi exporter keeps a European conversation in the same time zone as the buyer.
1888 Mills, LLC
Operating partner
United States, with operations in Pakistan, Bangladesh and Cambodia
The American partner whose name the company carries. It gives the group a North American selling platform and a second manufacturing footprint in two ASEAN and South Asian countries.
Philippines
No site
No plant, no office, no announced project
We found no factory, no subsidiary, no office and no announced investment as of November 2026. Everything below is an assessment of what a Philippine site could carry, not a report of a decision the company has taken.
Site names, plot numbers and land areas follow the geographical location table in the notes to the financial statements for the year ended 30 June 2026, read in November 2026. The Karachi figure combines the Landhi, SITE and North Karachi plots at about 46.65 acres. The overseas companies follow the associated undertakings list in the annual report. The Philippine card reflects our own check of November 2026 and is not a statement from the company.
L04 Buy list verdicts
What a Towel Mill Buys, and What the Philippines Has
Ten inputs, each judged against the Philippine base as we find it in 2026. The verdict is about what exists today at export quality, not what could be built with enough capital. Read the whole column before deciding anything: a plant is limited by its weakest input, not its strongest.
Cotton fibre
ImportThe Philippines does not grow cotton at commercial scale, so lint arrives from the United States, Brazil, Australia or West Africa. A fibre to towel chain cannot be rebuilt here from the farm up.
Combed cotton yarn
ImportSpinning at terry scale is thin here. Yarn comes from Pakistan, India, Vietnam or Turkey, which means a Philippine plant starts with the spread Feroze1888 removes by spinning its own.
Grey terry fabric and towel blanks
ImportTerry weaving is the missing machine. It is a specialised loom with a pile system, not a plain loom run differently, and nothing in the Philippine base we can find sells greige terry at export volume.
Yarn dyeing and fibre dyeing
PartlyCommission dye houses serve garment exporters, and package dyeing exists. Fibre dyeing at the volume a towel mill consumes, run in house, would be built rather than rented.
Bleaching, dyeing and finishing
PartlyThe process exists for knit and woven apparel. Continuous towelling ranges, the water treatment and the steam load that a towel dye house carries are the parts a new plant would have to add.
Rotary and digital printing
PartlyDigital printing is available and good for short runs. Rotary printing at towel width and at retail volume is not a service a Philippine buyer can place this quarter.
Embroidery and decoration
AvailableCrests, monograms, screen print, direct to film and heat transfer are routine in the Philippine base, including on our own floor. Hotel and hospital marks are a local conversation.
Cut and sew sewn product
AvailableBathrobes, patient gowns, baby t shirts and kitchen textiles are sewn product. Pattern rooms, technical packs and export quality sewing exist here at the standard a United States or European buyer audits.
Packaging and carton conversion
AvailablePolybags, hangtags, printed cartons and retail packing to a vendor standard are routine among the converters that serve the electronics and garment export sectors.
Healthcare and hospitality linen programmes
AvailableHospitals, hotels and institutional laundries here buy gowns, robes, bed linen and kitchen textiles on contract. This is the end of the chain that can start on the month a lease is signed.
Verdicts are our assessment of the Philippine industrial base in 2026, drawn from the sectors we already serve and from the supplier lists our customers work with. "Import" means no export scale capacity today, not a legal prohibition. "Partly" means the process exists but not at the width, the volume or the certification level a towel mill needs. "Available" means a buyer can place an order this quarter.
L05 Clearance rail
Five Registrations Between a Site Decision and a First Container
The sequence is not negotiable and the order matters. Each rung assumes the one before it, and the last one is where most of the elapsed time sits for a wet floor, because a discharge permit is issued to a site and not to a company.
Securities and Exchange Commission
An export corporation can be wholly foreign owned, and the paid in capital floor in the Foreign Investments Act is aimed at domestic market enterprises rather than at a business that sells abroad. Ownership is set by statute, not by a nominee arrangement.
Economic zone or investment board
The Philippine Economic Zone Authority registers a locator and issues the import permits, or the Board of Investments registers the activity under the priority plan. Either route carries the fiscal package below.
Bureau of Internal Revenue
Books, registration and the value added tax position of a registered export enterprise, including zero rating on qualifying local purchases of goods, power, water and telecommunications.
Customs and registered exporter status
Bureau of Customs accreditation for the looms, dye ranges and yarn, then registered exporter status so each consignment to the European Union can carry a statement on origin.
Labour, environment and local permits
Department of Labor and Employment compliance for shift work and safety, an environmental compliance certificate and discharge permit for a wet floor, then the local permits at the site, which is where water, power and road access are settled.
Route described from the registration requirements in force in November 2026. Timelines are not quoted because they move with the agency, the zone and the completeness of the technical file. Confirm the current paid in capital floor, the zone requirements and the environmental compliance route with the investment promotion agency and counsel before committing capital.
L06 Statute stack
Six Instruments That Set the Cost of a Philippine Plant
Incentives, ownership and duty access sit in six places. The first three decide what the plant pays at home, the last three decide what a container pays when it lands.
Republic Act 12066, signed November 2024
CREATE MORE
A registered enterprise pays 20 percent corporate income tax on net taxable income from the registered activity against the 25 percent standard rate, holds an income tax holiday of four to seven years, and may elect 5 percent special corporate income tax on gross income. Confirm the tier with the investment promotion agency before modelling it.
Republic Act 11647, as amended
Foreign Investments Act
Export manufacturing sits outside the Foreign Investment Negative List, so a Pakistani parent can hold one hundred percent without a Philippine partner of record. A business that sells to the domestic market faces a minimum paid in capital floor that the agency applies, so confirm the current figure before modelling an ownership structure.
Republic Act 7916
Special Economic Zone Act
The Philippine Economic Zone Authority operates more than 400 zones with ready built shells, treated water, industrial power, bonded warehousing and single window permitting. Duty free import of capital equipment is the clause a weaving or dyeing plant cares about most.
Unilateral, reviewed on a cycle
European Union GSP Plus
Qualifying Philippine textiles enter the 27 member states at zero customs duty when the consignment carries a registered exporter statement on origin. It is a preference, not a treaty: it is reviewed, it can be suspended, and it must be checked against the regulation in force on the shipment date.
In force for the Philippines since 2023
RCEP and the ASEAN trade area
The Regional Comprehensive Economic Partnership and the ASEAN Trade in Goods Agreement give Philippine origin goods tariff relief across fifteen Asia Pacific economies, with cumulation rules that reward regional sourcing rather than a single country supply chain.
Republic Act 11981
Tatak Pinoy Act
Domestic preference in government procurement and a national development programme that names priority industries. Textiles sit inside that list, which matters to uniform and institutional buyers even when a private hospitality order does not touch it.
Statute references follow the text of Republic Act 12066, Republic Act 11647, Republic Act 7916 and Republic Act 11981 in force in November 2026, and the European Union GSP Plus regulation as currently applied. Rates, holiday periods and qualification rules are restated in summary form only. Model them with the investment promotion agency and a tax adviser before any commitment.
L07 Mill ledger
Four Countries, Seven Lines, One Site Decision
Feroze1888's real alternatives are not only the Philippines. The comparison that matters is against the countries where a towel group already operates or could operate, on the seven dimensions that decide where a plant goes.
| Dimension | Pakistan | Bangladesh | Vietnam | Philippines |
|---|---|---|---|---|
| Fibre through to towel in one gate | Full chain, cotton to yarn to terry to stitched pack | Terry exists at home textile scale, yarn mostly bought in | Strong in garment, thin in terry and home textile | Sewn product only, yarn and terry are bought in |
| European Union duty | GSP Plus, with a registered exporter statement | Least developed country terms until graduation in November 2026, then a transition period | Free trade agreement in force since 2020 | GSP Plus, with a registered exporter statement |
| United States duty | Most favoured nation, standard rates | Most favoured nation, some programmes suspended | Most favoured nation, standard rates | Most favoured nation, no bilateral agreement |
| ASEAN and RCEP | Outside both | Outside both | Inside both | Inside both, RCEP in force since 2023 |
| Terry weaving and wet finishing depth | Deep, fifty years of towelling | Deep in terry home textile | Thin in terry | Absent in terry, thin in wet finishing |
| Water, effluent and steam for a dye house | Grid and gas constraints reported by the industry, partly offset by captive plants | Gas pressure deficits reported | Stable supply, rising cost | Water abundant, industrial power expensive, discharge permits site specific |
| Economic zone access | Export processing zones in place | Export processing zones and economic zones | Industrial parks and export processing enterprises | More than 400 zones under one agency |
Duty positions follow the preference regimes in force in November 2026 and describe the general position for qualifying textile goods, not any single tariff line. Water, energy and labour commentary reflects the industry reporting we read in the same month and is indicative. The four country frame is ours, chosen because those are the bases a Pakistani towel group and its competitors actually use.
L08 Fault lines
Six Things a Philippine Site Will Not Fix
Six things a site selection team should hear before the first deck. Each one is a reason a Philippine plant might not be built, and each one is better said now than discovered in year two.
A towel is woven, not sewn
The last two decades of Philippine apparel growth are in cutting and sewing. Terry weaving is a different machine, a different shed and a different skill. A Philippine site that cannot weave is a converter, not a mill, and it buys its margin in freight and duty rather than making it.
Towels are bulky and cheap per cubic metre
A container of towels carries less value than a container of jackets, so ocean freight takes a larger share of the invoice. Importing towel and re exporting it from Manila adds a leg to a product that already struggles to absorb one. Distance is the enemy of this product more than of garment.
The wet floor is thermal, not labour
Dye ranges, stenters and boilers run on steam, water and time. Philippine industrial power costs more than the tariff at a Sindh industrial estate, and a dye house needs an effluent plant and a discharge permit that a sewing floor does not. Sewing comes first because it carries the smallest power share.
Seventy three percent of exports go to North America
PKR 48.203 billion of the PKR 65.550 billion export book went to North America in the year to 30 June 2026. That is a concentrated book held through a long standing American partner. A Philippine plant would be a new vendor to those buyers, audited on its own account, not an extension of an existing approval.
Preference regimes move under your feet
Bangladesh graduates from least developed country status in November 2026, with a European transition period after graduation. GSP Plus is unilateral and reviewed on a cycle, and the United States tariff position has been shifting through 2025 and 2026. A plant is not built on a preference alone, because the preference can change while the building is still being paid for.
Mindanao is cheaper and thinner at the same time
A site in Tagum City or Cagayan de Oro reaches the Pacific and sits inside a lower wage region, and the pool of terry and dye house technicians is smaller there than in Cavite or Laguna. The honest trade is a lower cost base against a longer training curve and a shorter list of nearby suppliers.
These limits are our analysis, not a finding of any study commissioned by the company. Where a figure appears elsewhere on the page it carries its period. Where no figure appears, the statement is qualitative on purpose, because the input is not published and a number would be invented.
L09 Commercial terms
Published Terms Before Anyone Commits Capital
For the apparel and uniform programmes we run ourselves, published terms rather than a quotation form. A group evaluating a country needs to know what a first order costs and how long it takes before it commits to a building.
Minimum order
50 pieces
Per design for production. Blank stock minimums depend on brand, colour and size mix.
Production lead time
3 to 6 weeks
After sample, artwork and payment approval. Ocean freight time is additional.
Published tee price
₱320.00
About $5.10, €4.45 or £3.85. The header currency switcher converts live and settles the cart in the chosen currency.
Payment
Bank transfer
Documentary collection or a letter of credit can be agreed for qualified larger orders.
Prices and lead times are ours and apply to orders we produce in Tagum City and Cagayan de Oro. They are not a quotation for another manufacturer and they do not describe the cost of building a plant. Conversions are indicative and the header currency switcher settles the cart at the live rate.
L10 Downstream layer
The Sewn Product Floor We Already Run
We are not describing a country in the abstract. The cut and sew, decoration and uniform capacity on this page is capacity we operate, and the sewn towel programmes a group like Feroze1888 sells alongside its woven book are a live product category here.
A Pakistani towel group evaluating a Philippine site would start by testing the layer that already works. That layer is sewn product, decoration and floor ready packing, and it is the reason a first order can be placed before any capital decision is taken. A pilot container of robes, gowns or kitchen textiles tells a site selection team more about labour, freight and documentation than a feasibility study written from Karachi or Manila.
Our own production sits in Tagum City, Davao del Norte and Cagayan de Oro, Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings. We produce uniform, workwear, hospitality and promotional apparel programmes in the volumes a factory, a zone or an institutional buyer actually orders, and we quote production, freight and the last leg separately so a landed cost can be compared with a South Asian or Vietnamese alternative on equal terms.
- Cut and sew knitwear, woven tops, trousers and uniforms on our own floor, from sample through to retail packing.
- Bathrobes, patient gowns, baby t shirts and kitchen textiles as sewn programmes built on imported terry and greige.
- Sublimation, screen print, direct to film, embroidery and heat transfer decoration for small runs and reorders.
- Workwear, industrial uniforms and protective apparel for plant crews, zone neighbours and institutional buyers.
- Pattern making, grading and technical packs produced in English, so a specification transfers without translation.
- Two production points, Tagum City in Davao del Norte and Cagayan de Oro in Misamis Oriental, with freight routed to Manila and Cebu on scheduled sailings.
L11 Advisory
Feroze1888 and the Philippines, Answered
The questions that arrive when a South Asian manufacturer, a Philippine zone or a procurement team opens this file for the first time, including the one that decides most projects: whether a Philippine site can be justified on cost at all.
Does Feroze1888 Mills Limited have a plant or an office in the Philippines?
No, as of November 2026. The manufacturing base is in Pakistan, with plants in Landhi, SITE and North Karachi in Karachi and at Hub in Lasbela, Balochistan, a United Kingdom selling company, and an operating partnership with 1888 Mills, LLC. We found no Philippine factory, office, subsidiary or announced investment. This page is an independent analysis of what a Philippine site could carry for a company of that shape. It is not affiliated with, endorsed by or authorised by Feroze1888 Mills Limited or 1888 Mills, LLC.
Is there a free trade agreement between Pakistan and the Philippines?
No. Both are World Trade Organization members and trade on most favoured nation terms. The Philippines sits inside ASEAN and the Regional Comprehensive Economic Partnership, and holds European Union GSP Plus status. Pakistan holds GSP Plus with the European Union as well but is outside ASEAN and RCEP. Confirm the exact tariff line with a licensed customs broker before pricing a container in either direction.
Why would a Pakistani towel mill look at the Philippines at all?
Four reasons repeat. Access to ASEAN and RCEP from inside the bloc rather than from outside it. English as the language of government, courts and factory documentation, so a technical file transfers without translation. A sewn product base that can carry robes, gowns and kitchen textiles while any weaving or finishing capacity is built. And country concentration risk: a group that already sends 96.8 percent of its output abroad, with 73 percent of exports to North America, is managing the same question any single market exporter faces.
What could a Philippine plant actually make for Feroze1888?
The reachable list is sewn product and finishing. Bathrobes, patient gowns, baby t shirts, kitchen textiles and hospitality packs built on imported terry, decoration and embroidery, packaging and floor ready preparation, and healthcare and hospitality linen programmes sold on contract. Towel weaving and continuous towelling finishing are possible with imported machines, a water treatment plant and a trained crew, and neither is a first move.
What does the Philippines not have for a towel group?
Cotton growing, terry weaving at export scale, fibre and yarn dyeing at towel volume, continuous towelling finishing ranges, rotary printing at towel width, and a deep pool of terry loom and dye house technicians. It does have sewn product depth, decoration capacity, packaging, English language documentation, more than 400 economic zones, and zero duty access to the European Union on qualifying goods.
Which incentives would a plant register under?
CREATE MORE, Republic Act 12066, gives a registered business enterprise 20 percent corporate income tax, an income tax holiday of four to seven years, and an election of 5 percent special corporate income tax on gross income for an export enterprise. Export manufacturing can be wholly foreign owned under the Foreign Investments Act. The Philippine Economic Zone Authority adds zone registration, bonded warehousing, duty free capital equipment and single window permitting. Confirm the current rules with the investment promotion agency before modelling them.
How long does buyer vendor qualification take?
Twelve to twenty four months is the realistic range for a new textile or apparel site serving a global retail, hospitality or healthcare buyer. Social audits, chemical management, wastewater testing, factory environmental modules and a first production run all sit on the critical path. A group that already holds those approvals in Pakistan still has to qualify the new building, because the audit is issued to a site and not to a company.
What are your own minimum order, lead time and price for apparel?
Production starts at 50 pieces per design. Lead time is 3 to 6 weeks after sample, artwork and payment approval, with freight additional. The published tee price is ₱320.00, about $5.10, €4.45 or £3.85, and the header currency switcher converts live at checkout. We quote from Tagum City and Cagayan de Oro, and we separate production, freight and the last leg so a landed cost can be compared with a domestic or a South Asian alternative on equal terms.
L12 Direct enquiry
Send the Specification to Our South Asia Desk
Send the specification, the monthly volume, the destination port and the date you need the goods on site. We will come back with a costed plan that separates production, freight and the last leg, so you can see which line moves when the peso or the sailing schedule does. Our offices are open Mon to Sat, 8:30 AM to 5:00 PM.
Sources and scope: company identity, incorporation date, chairman, chief executive, registered and corporate office, company registration number, national tax number, plant addresses and land areas, division list, opening years, export geography, workforce, energy mix and certifications follow the Feroze1888 Mills Limited corporate site, the company profile page, the history page, the strengths pages and the annual report for the year ended 30 June 2026, all read in November 2026. Net sales, local sales, export sales, profit after tax, earnings per share, shareholders equity and the export split by region follow the audited financial statements for that year, with the summary ratios read from the Financial Highlights June 2026 sheet. The 1888 Mills, LLC relationship follows the associated undertakings list and the directors profile in the same annual report. Philippine supply positions, zone commentary, rents, wages, power tariffs, water charges, transit times and qualification periods reflect the market as we find it in 2026 and are our assessment; they must be confirmed with the zone, the utility, the carrier, the certification body and the counterparty before commitment. Incentive terms follow CREATE MORE, Republic Act 12066, the amended Foreign Investments Act, Republic Act 11647, the Special Economic Zone Act, Republic Act 7916, and the Tatak Pinoy Act, Republic Act 11981. Trade terms follow the European Union Generalized Scheme of Preferences Plus and the registered exporter system, the Regional Comprehensive Economic Partnership, the ASEAN Trade in Goods Agreement and the least developed country graduation schedule for Bangladesh. This page is an independent market analysis. It is not affiliated with, endorsed by or authorised by Feroze1888 Mills Limited or 1888 Mills, LLC, and it does not describe any announced Philippine office, plant, subsidiary or investment by either company.
